Determine the shear and moment diagrams

Assignment Help Mechanical Engineering

Reference no: EM13703047

Consider a simply supported beam of length 50ft subjected to a uniformly distributed downward load of 10kips/ft from x=10ft to x=40ft and concentrated downward loads of 100kips at x=10ft and x=40ft.

a) Determine the shear and moment diagrams from x=0ft to x=50ft

b) Determine the slope dv/dx and deflection v(x) from x=0ft to x=40ft

Reference no: EM13703047

Questions Cloud

Determine net radioactive heat transfer from each surface : A cylindrical furnace is 0.4 m long and 0.4 m in diameter. The two ends are maintained at 600 K and 700 K with emissivities of 0.6 and 0.7 respectively. The lateral surface has an emissivity of 0.8 and a temperature of 800 K. Determine the net radioa..

Minimum wall thickness of pole after incorporating factor : Erected a new sign welcoming people to the campus. The sign is painted on a rectangle of graphite reinforced epoxy which will not bend and measures 3 ft high and 5 ft wide. This sign is fastened along its 3 ft side to a hollow 2014-T6 aluminium (allo..

Air standard diesel cycle has a compression ratio : An air standard Diesel cycle has a compression ratio of 15, and the heat transferred to the working fluid per cycle is 800 Btu/lbm. At the beginning of the compression process the pressure is 14.7 lb/in^2 and the temperature is 60 F. Determine the pr..

Determine the rate of energy transfer from the air to water : Water enters one stream of an unmixed stream heat exchanger at 20°C and increases in temperature by 10°C. Air enters the second stream on the heat exchanger at 400°C and 5 kg/s. The air temperature at the exit of the heat exchanger is 200°C cooler th..

Determine the shear and moment diagrams : Consider a simply supported beam of length 50ft subjected to a uniformly distributed downward load of 10kips/ft from x=10ft to x=40ft and concentrated downward loads of 100kips at x=10ft and x=40ft.

Average tractive effort exerted by the locomotive : An electric locomotive together with its train has a mass of 200 tonne. The average tractive resistance to motion is 55 N/tonne while starting from rest up a gradient of 1 in 100. Calculate time taken to travel the first 1 km if the average tractive ..

Determine if the entropy change of the system is positive : Consider two ideal gases, A and B that are initially separated. For each of the following processes, the gases are allowed to mix. Determine if the entropy change of the system is positive, negative, or zero. Explain. (a) The process occurs isotherma..

What is the entropy change of the steam : Steam enters a nozzle at 4 MPa and 640Â°C with a velocity of 20 m/s. This process may be considered reversible and adiabatic. The nozzle exit pressure is 0.1 MPa. (a) Draw a sketch of this process. Include all known information. (b) What is the entro..

Consider a simply supported beam of length : Consider a simply supported beam of length 50 ft subjected to a uniformly distributed downward load of 10 kips/ft from x=10 ft to x=40 ft and concentrated downward loads of 100 kips at x=10 ft and x=40 ft. Determine the shear and moment diagrams from..

User Account

All Pages