Determine the resulting angular velocity of the wheel

Assignment Help Civil Engineering
Reference no: EM13317879

A bolt located 50 mm fm he center of an automobile wheel is tightened by applying the couple shown for 0.10 s. Assuming that the wheel is free to rotate and is initially at rest, determine the resulting angular velocity of the wheel. The wheel has a mass of 19 kg and has a radius of gyration of 250 mm.

Reference no: EM13317879

Questions Cloud

Bank or use the manufacturer''s payment plan to pay for the : Amos Excavating Inc. is purchasing a bulldozer. The equipment has a price of $100,000. The manufacturer has offered a payment plan that would allow Amos to make 10 equal annual payments of $15,582, with the first payment due one year after the purcha..
How much work is done on the ball by its weight : A 0.621-kg basketball is dropped out of a window that is 5.26 m above the ground. How much work is done on the ball by its weight
Determine the exit velocity of the gas mixture : Oxygen and methane are mixed at 250kPa absolute pressure and 100 degrees C. The velocity of the gases into the mixer us 5m/s. The density of the gas leaving the mixer is 2.2 kg/m^3. Determine the exit velocity of the gas mixture.
Find the fleas speed when it leaves the ground : Starting from rest, a 2.3x10-4 kg flea springs straight upward. While the flea is pushing off from the ground, What is the flea's speed when it leaves the ground
Determine the resulting angular velocity of the wheel : A bolt located 50 mm fm he center of an automobile wheel is tightened by applying the couple shown for 0.10 s. Assuming that the wheel is free to rotate and is initially at rest, determine the resulting angular velocity of the wheel.
Define carefully what is meant by a demand schedule or curve : Define carefully what is meant by a demand schedule or curve. State the law of downward-sloping demand. Illustrate the law of downward-sloping demand with two cases from your own experience.
What current is needed in the solenoids wires : A researcher would like to perform an experiment in a zero magnetic field, which means that the field of the earth must be cancelled. What current is needed in the solenoid's wires
Find the difference in positions : Two rays travelling parallel to the principal axis strike a large plano-convex lens having a refractive index of 1.60. find the difference in positions where they cross the principal axis
What level of q maximizes net benefits : Suppose the total benefit derived from a given decision, Q, is B(Q) = 25Q - Q^2 and the corresponding total cost is C(Q) = 5 + Q^2, so that MB(Q) = 25 -2Q and MC(Q) = 2Q.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Does the f per m the mlvss concentration and srt change

A complete mix activated sludge plant operates at design Q, with the reactor tank volume set by a nominal= 6 hours.. a) It was anticipated that it would operate at 25% RAS for an expected Xr= 2,000 mg/l. What would the actual be

  What superelevation rate would you recommend

What superelevation rate would you recommend for a roadway with a design speed of 100 km/hr and a radius of curvature of 500 m? Assume f = 0.11.

  Determine the coliform concentration at pacific ocean beach

An ocean outfall diffuser that discharges treated wastewater into the Pacific Ocean is 500m from a public beach. The wastewater contains 105 coliform bacteria per milliliter. The wastewater discharge flow rate is 0.3 m3/s.

  Calculate the density and specific weight of carbon dioxide

calculate the density and specific weight of carbon dioxide at a pressure of 300 kN/m^2 absolute and 60º C

  Determine the magnitude of p at an angle of 30 deg

A 50-kg crate is pulled by the constant force P at an angle of 30 deg off the x axis- the crate starts from rest and achieves a speed of 10 m/s in 5 s. the coefficient of kinetic friction between the crate and ground is 0.2.

  Describe the basic principle of differential gns positioning

Describe the basic principle of differential GNSS positioning and the difference between real time differential GNSS and post processed differential GNSS.

  Determine the allowable value of the tensile load p

A steel bar serving as a vertical hanger to support heavy machinery in a factory is attached to a support by the bolted connection. The main part of the hanger has a rectangular cross section with width b1 = 1.5 in. and thickness t = 0.5 in.

  What pressure in mpa must be applied to water to reduce

At 25 C, approximately what pressure in MPa must be applied to water to reduce its volume by 2%

  Calculate fraction of total atrazine that will be adsorbed

Calculate the fraction of total atrazine that will be adsorbed to the soil given that the soil has an organic carbon content of 2.5%. The bulk density of the soil is 1.25 g/cm3; this means that each cubic centimeter of soil (soil plus water) conta..

  Evaluate the rates of linear and angular deformation

Consider the pressure-driven flow between stationary parallel plates separated by distance 2b. Coordinate y is measured from the channel centerline. The velocity field is given by u=u max(1-(y/b)^2).

  Find the average time in system

If the time required to pay for parking is exponentially distributed with a mean of 15 seconds, find the average time in system.

  What would height be after it was consolidated into packing

A 1m thick layer of this soil is packed so that it is as loose as possible (void ratio, e_max ~= 0.9), and then it was vibrated until it was as dense as possible (void ratio, e_min ~= 0.35).

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd