Determine the resonant speed of the motor

Assignment Help Mechanical Engineering
Reference no: EM131285427

The electric motor of total mass of 30 kg is supported by four identical Springs of stiffness k = 8 kN/m each. The mass center of the 8-kg armature is 250 mm from the axis O of the armature.

(a) Determine the resonant speed of the motor.

(b) Find the amplitude of the steady-state vibration if the motor is running at twice the resonant speed.

979_83edbffa-af74-4562-ae45-3d2266326de0.png

Reference no: EM131285427

Questions Cloud

Should there be a way to monitor or police new products : What are some new products that have actually been harmful to consumers or to society? Should there be a way to monitor or "police" new products that are introduced to the marketplace?
Identify changes that should be made to the backup procedure : Identify the changes that should be made to the backup procedures in order to address the problem with the server backups. Outline the necessary actions that Server Administrators must verify for proper operation of servers in the event of a failov..
Find the spring stiffness k and the damping coefficient c : The figure shows a damped oscillator and the plot of its displacement during free vibration (x is measured from the equilibrium position). Knowing that the weight of the oscillator is m = 0.2 kg, find the spring stiffness k and the damping coeffic..
Governing law regarding emergency management : Identify a local or state government's governing law regarding emergency management. Local laws often are called ordinances and are compiled in a code of ordinances. State laws are typically called statutes and are compiled as part of the state co..
Determine the resonant speed of the motor : The electric motor of total mass of 30 kg is supported by four identical Springs of stiffness k = 8 kN/m each. The mass center of the 8-kg armature is 250 mm from the axis O of the armature.
What are the advantages of b2b e commerce to companies : What are the advantages of B2B e-commerce to companies? To society? Are there any disadvantages of B2B e-commerce?
How will the environment influence the choices : How will the environment that you create for your students influence the choices that they make and their sense of responsibility to learn?
What are the advantages and disadvantages to sellers : What are the advantages and disadvantages of this practice to buyers?- What are the advantages and disadvantages to sellers?
Determine the amplitude of the steady-state vibration : Two springs of stiffnesses k1 and k2 are attached to the mass m. One of the springs is connected to a rigid support, whereas the free end of the other spring undergoes the harmonic displacement y(t) = Y sin ωt.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A 50 kg copper block initially at 350 degree c is quenched

a 50 kg copper block initially at 350 degree c is quenched in a closed rigid insulated tank containing 120 l of liquid

  What heat removal flux can be achieved at the surface

What heat removal flux can be achieved at the surface of a horizontal 0.01 mm diameter electrical resistance wire in still 27?C air if its melting point is 927?C?

  What is the difference between ideal materials and real

what is the difference between ideal materials and real materials? is there a difference in strength and why do we see

  Determine the mean and standard deviation

What percentage of carbon produces the strongest plain carbon steel - Determine the mean and standard deviation of these results.

  Calculate the contact forces at a and b

the 50-kg homogeneous smooth sphere rest on the 30 degree incline A and bears against the smooth vertical wall B. calculate the contact forces at A and B.

  Air at 35degc 105 kpa flows in a 100 mm times 150 mm

air at 35degc 105 kpa flows in a 100 mm times 150 mm rectangular duct in a heating system. the volumetric flow rate is

  What is the work done on or by the steam

A piston-cylinder contains 0.1 kg of superheated steam at 180 ¯ C and 5.0 bars. The piston is frictionless and freely floating. Heat is added until the final volume is twice the initial volume.

  Estimate the output in each mine after ten years

Four gold mines in a mountainous region have been in continuous operation for five years. The output is measured in tons, and it has been declining each year in each mine. Estimate the output in each mine after ten years

  Determine the air temperature at the limiting pressure

a cubic tank 1m3 is filled with air at 280k and 100 kpa. it is fitted with a relief valve that will vent at 600 kpa.

  Determine the vertical deflection

Determine the vertical deflection at B and the member end moments at A and B for the beam in Figure. El is a consrtant.

  What is the temperature of the helium at the end of process

0.78 kg of helium fills a piston-cylinder device (initial volume of 0.5 m3 which is maintained at an absolute pressure of 240 kPa. Heat is added until the volume doubles. What is the temperature of the helium at the end of the process?

  Calculate the thickness of the material

For a piece of material, the steady state flow of material across its thickness is 180 x 10-3 kg/m2-hr. If the concentration on the high side of the material is 2.0 kg/m3 and is 0.22 kg/m3 on the low side of the material, calculate the thickness of t..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd