Determine the reaction of the rocker b on the beam

Assignment Help Civil Engineering
Reference no: EM13317364

Determine the horizontal and vertical components of reaction at the pin A and the reaction of the rocker B on the beam.

a)Determine the horizontal and vertical components of reaction at the pin A

b)Determine the reaction of the rocker B on the beam.

Reference no: EM13317364

Questions Cloud

Calculate the pressure in the constriction in a pipe : When 0.3 m^3/s water flows through a 150 mm constriction in a 300 mm horizontal pipeline, the pressure at a point in the pipe is 345 kPa, and the head loss between this point and the constriction is 3 m.
When the fire truck is at rest : A fire truck siren produces a steady single tone of frequency 500 Hz when at rest. When the fire truck is at rest
Determine flow rate into or out of each reservoir : Three reservoirs are connected by three pipes with hA = 100 f t, hB = 20 f t, hC = 0 f t, l1 = 1000 f t, l2 = 500 f t, l3 = 400 f t and D1 = D2 = D3 = 1 f t. Determine flow rate into or out of each reservoir if friction in each pipe is 0.02.
Terminate the linked list properly : Define a struct which has exactly 5 variables that, for one person, will hold the last name, the "other" names. the-year-took-office. the-yew-left-office, and a pointer. The pointer will be used to point to the next set of data. for the next perso..
Determine the reaction of the rocker b on the beam : Determine the horizontal and vertical components of reaction at the pin A and the reaction of the rocker B on the beam. a)Determine the horizontal and vertical components of reaction at the pin A
What is the orbital speed of the second satellite : A satellite is in a circular orbit around an unknown planet. The satellite has a speed of 1.70 104 m/s, and the radius of the orbit is5.00 106 m. What is the orbital speed of the second satellite
List the things you changed and the purpose of changing it : For readability, all variable names were changed to start with a lowercase letter (e.g. VerbList was changed to verbList) and all function names were changed to start with a uppercase letters
Corporate goals-objectives for coping with unionization : Which of the following is required by most unions and is often waived for workers who become members following a successful organizing drive? Many employers have corporate goals and objectives for coping with unionization and
Write the matlab statements to evaluate tan : Assume that theta is given in degrees, and write the MATLAB statements to evaluate tan(theta) as long as the magnitude of cos( theta) is grater than or equal to 10^(-20). If the magnitude of cos(theta) is less than 10^(-20)

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is probability that more than people will participate

Suppose 500 people are approched outside of a grocery store to answer some survey questions. If each person decides independently whether or not to participate, and each has a probability of 0.1 of participating

  Determine shear stress in 25 by 50 cm rectangular section

Determine the shear stress in a 25 × 50 cm rectangular section if the shear force is 20 KN and torsional moment is 10 KN m at service loads. Assume M20 mix and 0.75% tension reinforcement at an effective cover of 50 mm.

  Calculate the required flowrate of a dive shop

The owner of a dive shop wants to purchase a constant displacement air compressor capable of simultaneously filling 10 SCUBA tanks. each having a volume of 0.4 ft^3. in 20 minutes.

  Estimating annual erosion

Using the USLE, estimate the annual erosion from a 100 ha. forested watershed assuming the following: R =112 tonnes/ha/year. The forest is in fair condition with 40% cover; Average slope is 3%; The soils are clay loam in hydrologic group C.

  Determine the total dead load

determine the total dead load, per foot of length, each beam must support.

  Determine what is the height of the pure water column

a closed tank contains two straified non misicble fluid layers and compressed air. the fluid of the tank is saline water (relative density 1.036) with a total depth of 3.5m. the top fluid layer is oil (relative density of 08.2) with a depth of 0.6..

  Find appropriately sized beam such that radius is not less

The yield stress for A-36 is 250 MPa. Using factor of safety against yield of 1.25, determine an appropriately sized beam such that the radius of curvature is not less than 140m. E= 200 GPa, G= 77.2 GPa.

  What are the reactions-shear forces and bending moments

If you have 10 kips acting downward on a foundation and footing, 4 feet long, with uniformly distributed load acting up ward of 2.5 k/ft (soil) also 4 ft long. what are the reactions, shear forces, and bending moments at the tree critical points

  Determine what is the critical insulation radius

Water flows on the inside of a steel pipe with an inner diameter of 2.5cm. The wall thickness is 2mm, and the convection coefficient on the inside is 500 W/m2oC. The convection coefficient on the outside is 12 W/m2oC.

  Compare streamline with the streakline through the origin

A velocity field is given by V = xi + x(x-1)(y-1)j, where u and v are in feet. Plot the streamline that passes through x = 0 and y = 0. Compare this streamline with the streakline through the origin.

  Determine the magnitude of v which moves to the right

A stream of water of cross-section area A and velocity v1 strikes a plate which moves to the right with a velocity V. Determine the magnitude of V, knowing that A 5 600 mm2, v1 5 30 m/s and P 5 400 N.

  Difference between dry and moist lapse rate

Explain how the desert air can contain much more h 2 o vapor in the air than the pole, and still a lower humidity than the pole? what causes the difference between dry and moist lapse rate?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd