Determine the rate of heat transfer to the stock in furnace

Assignment Help Civil Engineering
Reference no: EM13305035

Cylindrical, steel bar stock (density = 7833 kg/m3, Cp = 0.465 kJ/(kg C)) of 10-cm diameter is heat-treated by drawing it at a velocity of 3 m/min through a 6-m-long furnace maintained at 900C. If the stock enters the furnace at 30C and leaves at 700C, determine the rate of heat transfer to the stock in the furnace.

Reference no: EM13305035

Questions Cloud

What length x must the seaward arm of the breakwater : Consider an L-shaped breakwater that protects a small harbor dredged to a uniform depth of 6 m. For a 2 m high, 10 s period incident wave at the head of the breakwater having incident wave direction of 60 degrees
What is the tax on salvage value : Mars' marginal tax rate is 40%, and it uses a 12% WACC to evaluate projects of this nature. The applicable depreciation rates are 20%, 32%, 19%, 12%, 11%, and 6%. If the machine costs $60,000.
How to specify the number of plates that can be stored : A plate storage system for a self-serve salad bar in a restaurant. As plates are added to or withdrawn from the stack, the spring force and stiffness are such that the plates always protrude above the tabletop by about 60 mm.
Obtain the voltage of the output voltage : When there is an input connected across a 12V DC source what is the voltage of the output voltage after the power is connected for a while
Determine the rate of heat transfer to the stock in furnace : Cylindrical, steel bar stock (density = 7833 kg/m3, Cp = 0.465 kJ/(kg C)) of 10-cm diameter is heat-treated by drawing it at a velocity of 3 m/min through a 6-m-long furnace maintained at 900C.
What is the value of its operations : Suppose Leonard, Nixon, and Shull Corporation's projected free cash flow for next year is $100,000, and FCF is expected to grow at a constant rate of 6%. If the company average cost of capital is 11%, what is the value of its operations?
How much heat does it exhaust in each cycle : A heat engine has an effiency of 35.0 % and recieves 150 K of heat per cycle. How much heat does it exhaust in each cycle
What nominal rate of return do you expect to earn : You expect the inflation rate to be 2.9 percent and the U.S. Treasury bill yield to be 3.7 percent for the next year. The risk premium on small-company stocks is 12.6 percent. What nominal rate of return do you expect to earn on small-company stoc..
What real rate of return did she earn on her investments : Last year, Rita earned 11.6 percent on her investments while U.S. Treasury bills yielded 3.8 percent and the inflation rate was 3.1 percent. What real rate of return did she earn on her investments last year?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine when would the wells start interfering each other

One of the wells pumps at a rate of 1,240 m^3/ day. The second well pumps at 850 m^3 / day. If the aquifer has a T= 2000m^2 / day and a storage coefficient of 0.0004, when would the wells start interfering each other

  How do concept of green design and industrial ecology differ

How do the concepts of green design, industrial ecology, and sustainable developement differ from past approaches to engineering design Prepare a brief report on this topic using some specific examples for illustration.

  Find what is the minimum distance from the stalled car

The road is in good condition and is initially dry, but it becomes wet 160 ft before the stalled car (and stays wet until the car is reached). What is the minimum distance from the stalled car at which the driver could apply the brakes and still s..

  Find what must be the composition in copper-nickel alloy

It is desirable to produce a copper-nickel alloy that has a minimum noncold-worked tensile strength of 390 Mpa and a ductility of at least 40% elongation. Is such an alloy possible If so, what must be its composition

  Survey with construction applications

The calculation and layout of horizontal and vertical curves should be done only by experienced surveyors and differential leveling measurements

  Find the torsional moment t for the maxiumum shear stress

The pipe has an outside diameter of 60mm and an inside diameter of 50mm. Find the torsional moment T if the maxiumum shear stress is 80MPa.

  What is the percent decrease in the cross-sectional area

a circular aluminum tube of L=600 mm is loaded in compression by forces P. The outside and inside diameters are d2=75 mm and d1=63mm, respectively. A strain Gage is placed on the outside of the tube to measure normal strains in the longitudinal di..

  Compute the normal flow rate through the channel

A large drainage channel has a trapezoidal cross section with a bottom width of 75 feet and bank side slopes of 4:1 (H:V). If the normal depth of flow is 25 feet, compute the normal flow rate through the channel (Q in cfs).

  What is the stress along the top edge and the bottom edge

A horizontal pre-stressing force of 500kN is applied to rectangler beam. the beam has a depth of 500mm and a width of 250mm. the force is applied at a distance of 80mm below the x-x axis.

  Transportation and management

In the construction management, there is a lot of procurement route that are necessary and suitable for the construction industry.

  How far does each skater travel

If they pull themslevles along the the rope until they meet how far does each skater travel? B)If only the 45 kg skater pulls along the rope until she meets her friend( who just holds onto the rope) how far does each skater travel?

  Determine how much water was lost to the atmosphere

If a certain watershed received 1,250 mm of rain during a year, stored 150 mm of water in its soil mantle, and lost 400 mm of water downstream, how much water (in mm) was lost to the atmosphere (mainly through plants)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd