Determine the pressures and volumes at points a-b-c and d

Reference no: EM13305565

A 1.00 mol sample of an ideal gas (gamma = 1.40) is carried through the Carnot cycle. At point A, the pressure is 25.0 atm and the temperature is 600 K. At point C, the pressure is 1.00 atm and the temperature is 400 K. Determine the pressures and volumes at points A,B,C,D. calculate the net work done.

Reference no: EM13305565

Questions Cloud

Determine theoretical maximum efficiency of the heat engine : Assume the collector provides this energy to a thermal storage unit (a thermal reservoir) at 220oC. A heat engine receives energy from this thermal storage unit and discharges energy by heat transfer to the surroundings at 20 C

Find the velocity of the wind : A plane can fly 305 mph in still air. If it can fly 185 miles downwind in the same amount of time it can fly 120 miles upwind, find the velocity of the wind.

Find the force exerted on the inside of the door by the air : A car misses a turn, sinks into a shallow lake, coming to rest on its side with the door horizontal and at a depth of 9.3 m. find the force exerted on the inside of the door by the air

Describe the finalmixture after equilibrium has been reached : a 150 gm ice cube at 0.0 celcius is dropped into an insulated cup with 200 gm of water at 15 celcius. describe the final mixture after equilibrium has been reached

Determine the pressures and volumes at points a-b-c and d : A 1.00 mol sample of an ideal gas (gamma = 1.40) is carried through the Carnot cycle. At point A, the pressure is 25.0 atm and the temperature is 600 K. At point C, the pressure is 1.00 atm and the temperature is 400 K.

Compute by how much will the spring be stretched : A block of weight W = 13.5 N, which can slide without friction on a 27.5o incline, By how much will the spring be stretched

Determine the rate of increase of the piezometric head : The gasoline at point C and time t has an acceleration given by a=(-12i+40k) ft/s^2 where i and k are the horizontal and vertical unit vectors. Find the rate of increase of the piezometric head and the pressure in the x,y,z and a directions.

What is the tension in the cable at the lowest point : a 100 kg wrecking ball savings on a 15.0 m long cable. if is swings from rest 4.0 m above the lowest piont, what is the tension in the cable at the lowest point

Determine the sludge age and cell wastage flow rate : Assume: Suspended solids in effluent negligible Wastage is from aeration tank Yield coefficient = 0.4 Bacterial decay rate = 0.04 1/d Effluent BOD5 = 10mg/L F/M = 0.33 mg/mg*d BOD5 after primary settling = 150mg/L MLVSS = 1700mg/L MLSS = 1.4(MLVSS..

User Account

All Pages