Determine the number of truck loads required to obtain

Assignment Help Civil Engineering
Reference no: EM13307641

For construction of an embankment, the soil is transported from a borrowed area using a truck which carries 5.5 m^3 of soil at a time, with the following details: For the Borrowed Pit: bulk unit weight= 16 KN/m^3 and moisture content = 6.7% ; For Truck (loose): bulk unit weight = 10.7 KN/m^3 , moisture content 5.2% ; For Field (compacted): bulk unit weight = 19.3 KN/m^3 , moisture content = 14% Determine the number of truck loads required to obtain 150m^3 of compacted earth fill and the volume of the borrowed pit.

Reference no: EM13307641

Questions Cloud

Values-based service brands narratives from ikea : Read the article "Values-Based Service Brands: Narratives from IKEA" by Edvardsson from the readings for this module. Using IKEA as the company in point, conduct research, using the Argosy University online library and the Internet, to better underst..
Determine the degree of saturation of a sample of soil : Determine the degree of saturation of a sample of soil given that its maximum dry unit weight is 18 kN/m^3 and its optimum moisture content is 12.1%. Assume the Specific Gravity of soil is 2.65.
Calculate the moment of inertia of the uniform discc : A disc has a radius of 2.20 cm and a mass of 27.0 grams and is initially at rest. Starting at time t=0, two forces are applied tangentially to the rim as indicated, calc the moment of inertia of the uniform disc
Write a mips program where we store 5 integers in the array : Write a mips program where we store 5 integers in the array. For example.
Determine the number of truck loads required to obtain : For construction of an embankment, the soil is transported from a borrowed area using a truck which carries 5.5 m^3 of soil at a time, with the following details: For the Borrowed Pit: bulk unit weight= 16 KN/m^3 and moisture content = 6.7%
Calculate the heat rejcted by the steam : Steam at 18 MPa and 600 C is contained in a cylinder of volume 0.5 m^3. Calculate the heat rejcted by the steam
Find the percentage volume less due to compaction : A soil deposit has a void ratio of 0.89, is the void ratio is reduced to 0.59 by compaction; find the percentage volume less due to compaction.
What pressure in mpa must be applied to water to reduce : At 25 C, approximately what pressure in MPa must be applied to water to reduce its volume by 2%
Calculate the change in internal energy of the fluid : a fluid at 690 kpa has aspecific volume of 0.25m3/kg and entersna process with a velocity of 150m/s. calculate the change in internal energy of the fluid

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine how many moles of the gas are present

A gas has a volume of 2.0 liters, a pressure of 1.2 atm, and a temperature of 30 degrees Celsius is heated to 60 degrees Celsius and compressed to a volume of 1.5 liters. What is the new pressure

  Operational changes to prevent river from contamination

assuming that the contaminant travels mainly by advection, propose any operational changes to the given layout to prevent the river from being contaminated.

  Design a needle-punched nonwoven geotextile for use

The thickness of geonet is 0.2 inch (5 mm). Assume the maximum inflow rate is 0.14 inch/hour. The liquid head over the geomembrane liner is 2 inches. The index properties of the soil placed over the geotextile are as follows

  Determine aerodynamic drag on the full-scale prototyple car

The aerodynamic drag of a new sports car is to be predicted at a speed of 50mph at an air temperature of 25 degrees Celcius. Automotive engineers build a one-fifth scale model of the car to test in a wind tunnel.

  Determine what is the first-order decay rate constant

A minimum contact time of 30 min is required to reduce the pathogen concentration from 100 pathogens/L to below 1 pathogen/L through a first-order decay process. You plan on treating water at a rate of 1,000 gal/min.

  Find the depth and change in water surface elevation caused

Water is flowing at a depth of 10 ft with a velocity of 10 ft/s in a channel of rectangular section. Find the depth and change in water surface elevation caused by a smooth upward step in the channel bottom of 1 ft.

  Calculate the monthly mass emission rate to the atmosphere

each month the splendid dry cleaning company buys one barrel ( 42 gal., 0.160 m^3) of tetrachloroethylene (C2Cl4) (M.W.= 166, p= 1.594 g/cm^3) ninety percent of the fluid is lost to the atmosphere and 10% remains as residue to be disposed of.

  Describe will the car stop before hitting the wall

A car weighing 4000 pounds strikes the stopping barrier depicted below head on at a speed of 70 mph. The stopping force in the barrier is a function of how far the car penetrates into the barrier.

  Describe the difference between the two locations at time t

The peak-hour volumes at two locations were counted and found to be equal. However, the PHFs were .85 at the first location and .60 at the second. Describe the difference between the two locations if t=5 min.

  What power must pump supply to system to pump the oil

What power must the pump supply to the system to pump the oil from the lower reservoir to the upper reservoir at a rate 0.20 m^3/s. Sketch the HGL and the EGL for the system.

  Draw the influence line for the support reaction

Draw the influence line for the support reaction at A and calculate the support reaction at point

  Explain which illuminates a light indicating bowls contents

A scale for rapidly weighing ingredients in a commercial bakery operation is shown. An empty bowl is first placed on the scale. Electrical contact is made at point A, which illuminates a light indicating the bowl's contents are underweight.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd