Determine the number of kilograms of chlorine needed per day

Assignment Help Civil Engineering
Reference no: EM13559228

Consider again the proposed water treatment plant for a city of 100,000 people where the maximum daily water usage rate is 99 X 106 L/d. Determine (a) the number of kilograms of chlorine needed per day and (b) the capacity of the contact tank. You may assume that the chlorine demand is 1.0 mg/L and that the desired chlorine residual is 0.2 mg/L. Furthermore, you may assume that the minimum contact time should be 30 minutes. (The contact time in water treatment plants is usually provided by a large storage chamber called a clear well or storage reservoir. The primary function of the clear well is to isolate the plant from the hourly fluctuation of municipal water demand, but it also serves the purpose of allowing sufficient time so that the concentration of free available chlorine will stabilize at the proper value before being pumped to users.)

Reference no: EM13559228

Questions Cloud

Estimate the chronic daily intake : Estimate the chronic daily intake of 1,1,1-trichloroethane from exposure to a city water supply that contains a 1,1,1-trichloroethane concentration equal to the drinking water standard of 0.2 mg/L. Assume the exposed individual is a child (8 years ol..
Find the change in the internal energy of the water : One gram of water changes from liquid to solid at a constantpressure of 1.00 atm and a constant temperature of 0°C. Find the change in the internal energy of the water
What is the equilibrium droplet size at a relative humidity : Design a hollow steel shaft with an inside diameter 1/3 that of the outside diameter. The shaft transmits 200 kW at a speed of 20 Hz. The allowable shearing stress is 55 MPa, and the allowable angle of twist is 1 degree per meter of length.
Define a leader or a hero in these ancient cultures : Explain in detail and with examples from at least two texts what you have learned about yourself or about today's modern society from the myths and tales of the societies of our past.
Determine the number of kilograms of chlorine needed per day : Consider again the proposed water treatment plant for a city of 100,000 people where the maximum daily water usage rate is 99 X 106 L/d. Determine
What is the percent removal of two particles with settling : What is the percent removal of two particles with settling velocity of 0.001 and 0.002 m/s in the sedimentation basin is the basin is (i) a rectangular tank and (ii) an up flow clarifier?
Evaluate the average blood speed : The volume flow rate in an artery supplying the brainis 3.6*10 -6 m3/s. If the radius of theartery is 5.3 mm, determine the average blood speed
Who is the target audience in translating : Who is the target audience in Translating Translation by Alberto Rios?
Determine the filtration rate if the depth of this layer : A Single clean layer of sand in a rapid-sand filter has an average grains size of 20X40 US. Mesh, porosity go 0.4, sand specific gravity of 2.65, and shape factor of 0.85. The absolute viscosity and density of water are 1.4X10^-3 Pa-s and 998 kg/m^3,..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compare the relative contributions of a treated water supply

Compare the relative contributions of a treated water supply and the collection, treatment and disposal of human wastes towards the control of epidemic diseases in developing countries. If there are insufficient resources for both systems, should one..

  What is the rate of cooling for the refrigerator

Some skin divers go as deep as 50m. What is the gage pressure at this depth in fresh water, and what is the ratio of the absolute pressure at this depth to normal atmospheric pressure? assume T=20 degrees celcius

  Find the maximum deflection of a wooden bearer

Find the maximum deflection of a wooden bearer which has three supports; one at each edge (2) and one in the middle (2m from each other). Bearer holds a UDL over its whole length (4m) of 600 N/m.

  What superelevation rate would you recommend

What superelevation rate would you recommend for a roadway with a design speed of 100 km/hr and a radius of curvature of 500 m? Assume f = 0.11.

  Graph the data from the table on log-log paper using radius

Based on volume of a sphere V=4/3(pi)r^3, create a table of volume vs. radius allowing radius to vary from 2.0 to 10.0 cm in 1 cm increments. Graph the data from the table on log-log paper using radius as the independent variable.

  Determine the total force in the connection at the end

At the end of a 0.6-m diameter pipe, the pressure is 270 KN/m2. The pipe is connected to a 0.3-m diameter nozzle. If the flow rate is 1.1 CMS, determine the total force in the connection

  What is the concentration of tracer in the reactor

What is the concentration of tracer in the reactor 1 h after tracer addition is terminated? The reactor had an initial concentration of tracer of 1.0 mg/L when tracer addition commenced.

  Develop algorithms for explicit solution of kinematic eqtns

Develop algorithms for the explicit solution of the Kinematic Equations when applied to a problem of runoff from a plane surface subject to a steady rate of rainfall excess.

  What is your best guess of the students total

What value of ? minimizes the error of this prediction? In other words, what is your best guess of the student’s total (exam 1+ exam 2) score?

  Which command in matlab is to delete all the variables

If variable Test(i,j) is selected so the first column represents the student number (1,2,..., 32), 2nd column represents the score of the first homework, 3rd column represents the score of the 2nd homework, etc. If there is a total of 6 homework for ..

  Why the prediction are less than the observed result

why the prediction are less than the observed result of connection in tension experiment?

  Find the pressure at the forward and rear corners along the

A closed box with horizontal base 6m x 6m and height of 2m is half-filled with water and is accelerated Ax=4.9 m/sec^2 and Ay=-2.4 m/sec. find the pressure at the forward and rear corners along the bottom.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd