Determine the normal stress in each portion of the rod

Assignment Help Civil Engineering
Reference no: EM13312478

A polystyrene rod consisting of two cylindrical portions AB and BC is restrained at both ends and supports two 6-kip loads as shown. Knowing that E = 0.45 X 106 psi, determine (a) the reactions at A and C, (b) the normal stress in each portion of the rod.

Reference no: EM13312478

Questions Cloud

Find the support movements draw sfd and bmd : A fixed beam of span 6m carries point loads 20kN and 15kN at 2 m and 4 m from the left end respectively. Find the support movements draw SFD and BMD
Calculate the ionic packing factor for fcc nacl : Calculate the ionic packing factor for fcc NaCl. Take the atomic radii for Na and Cl as 0.097 and 0,181 nm respectively.
Calculate the average linear velocity : If a discus thrower rotates through the last 46 degrees of a turn in 0.11 seconds and the distance from the axis of rotation to the center of the discus is 1.22m
Determine what is the maximum speed attained : The coefficient of rolling resistance can be taken to be a constant for all speeds, equal to 0.008. If the cyclist is coasting down a 6% grade, what is the maximum speed attained
Determine the normal stress in each portion of the rod : A polystyrene rod consisting of two cylindrical portions AB and BC is restrained at both ends and supports two 6-kip loads as shown. Knowing that E = 0.45 X 106 psi,
Discuss the merits of paying dividends : You just graduated last year (after completing a rigorous corporate finance course) and now you have been asked to discuss Payout Policy with a number of MBA students at Galen University
What is the average angular acceleration of the club : During a drive by golfer, the angular velocity of his club is zero at the top of the backswing and 34 rad/s at the bottom of the downswing just before impact with the ball, what is the average angular acceleration of the club
Determine the flow rate above the pipe : A 2-inch diameter glass pipe is connected to a pipe network in which the pressure is 70 psig. If the length is 300 feet and the outlet is 10 feet above the pipe, determine the flow rate.
What is the speed of the bullet : Agent Arlene devised the following method of measuring the muzzle velocity of a rifle. She fires a bullet into a 4.600-kg wooden block resting on a smooth surface, What is the speed v of the bullet

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the point b ellipse height

H = h - N Point B has a geoid correction of -100', and a NAVD88 elevation of 100'. What is the point B ellipse height

  Determine the value of po

determine the value of Po, as a funciton of H, for these two investment alternatives to be equivalent at an interest rate of i=15% per year.

  Determine what is the angular rotation rate of the car

A car is travleing towars a 20 degree slope at 60 mph. The wheels have a radius of 12 in. and the car's wheelbase is 100 in. What is the angular rotation rate of the car immediately after the front wheel contacts the slop

  Calculate the minimum reflux ratio required with a feed

A continuous distillation column containing plates is required to distil a 46% w/w ethanol (C2H5OH) in water solution. The overhead product must contain 91 % w/w ethanol and the bottom product 5 % w/w ethanol.

  Determine the maximum temperature in the tank

Determine the maximum temperature in the tank. Take the thermal conductivity of the wastes as 2.0 W/mK.

  How many inches of rain can fall over the entire barge

A barge measures 10 ft (depth) by 35 ft by 120 ft and weighs 100 U.S. tons. The barge floats in fresh water (specific weight = 62.4 lb/ft3) and is evenly filled with 38,000 bushels of corn (60 lb/bushel).

  Determine the average normal stress developed in each post

If all the posts have the same original lenth before they are loaded, determine the average normal stress developed in each post when post C is heated so that its temperature is increased by 20 degrees F.

  Find how long would the pipe have to be in feet to achieve

The flow in the river is 30ft^3/min and the first-order rate constant for disinfection is 6min^-1. 1)What kind of hydrodynamic model should you use. 2) write the mass balance equation for microorganisms in symbols at steady state. define symbols.

  What will be the approximate amount of the quarterly payment

What annual investment is required at 8% per year compounded annually to accumulate to $100,000 at the end of 20 years?

  Determine what diameter should the spherical balloon have

A balloon is to be used to carry meteorological instruments to an elevation of 15,000 ft where the air pressure is 8.1 psia. The balloon is to be filled with helium, and the material from which it is to be fabricated weighs 0.01 lbf/ft^2.

  Determine time at which collar starts to slip relative to it

The coefficient of static friction between the collar of mass m=2 kg and the bent bar is Us=0.35, and the collar is initially d=70 cm from the spin axis AB. Assuming the motion starts at t=0, determine the time at which the collar starts to to sli..

  Determine tension in rope ab required for static equilibrium

The frame is designed to carry the hanging mass at G equal to 167 kg. The frame is supported by a pin connection at C and the rope AB, and constructed with pin connections at points E, F, and D. Importantly, members BEFG and EDC are continuous mem..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd