Determine the normal depth in the channel for a discharge

Assignment Help Civil Engineering
Reference no: EM13316294

A natural channel that is clean and irregular(n= 0.040) has a bottom width of 15 ft m, side slopes of 6:1 (H:V) and a bottom slope of 0.0002. Using Manning's equation, determine the normal depth in the channel for a discharge of 720 cfs.

Reference no: EM13316294

Questions Cloud

How many turns wil the stone make before coming to rest : You have a grindstone ( a disk) that is 84.0 kg, has a .307-mradius, and is turning at 104.0 rmp, How many turns wil the stone make before coming to rest
Discuss the apache web server in regard to cost : Discuss the Apache Web server in regard to cost, functionality, and compatibility. Are there certain implementations were it may not be suitable?
Determine when the queue will dissipate the total delay : If vehicles are processed at a uniform deterministic rate of six per minute, determine when the queue will dissipate, the total delay, the maximum queue length (in vehicles), the longest vehicle delay under FIFO, and the longest vehicle delay unde..
Increase print and television advertising to raise brand : After 15 years of steady growth, sales of a brand of aftershave have begun to decline. What is the first step that the marketing director should take? Choose 1 answer
Determine the normal depth in the channel for a discharge : A natural channel that is clean and irregular(n= 0.040) has a bottom width of 15 ft m, side slopes of 6:1 (H:V) and a bottom slope of 0.0002. Using Manning's equation, determine the normal depth in the channel for a discharge of 720 cfs.
What is the angular speed of the small cylinders : in a simplified roller bearing, the inner cylinder has a radius of 1.0 cm and is stationary. What is the angular speed of the small cylinders
When all the available factors of production are : In order for Ireland to grow more potatos, wool production must decrease. If wool and potatoes were the only two goods Ireland could produce, this situation is an example of
What are the reactions-shear forces and bending moments : If you have 10 kips acting downward on a foundation and footing, 4 feet long, with uniformly distributed load acting up ward of 2.5 k/ft (soil) also 4 ft long. what are the reactions, shear forces, and bending moments at the tree critical points
Find the carts acceleration and mass : In an experiment using an inclined track with a dynamics cart, the computer failed, find the cart's acceleration, mass, and the tension in the string connecting the cart to the accelerating 50g mass

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the normal depth yo and critical depth yc

A 1 m diameter unfinished concrete pipe (n = 0.015) has a slope of So = 0.001 and conveys water at Q = 0.5 m3/s. Find the normal depth yo and critical depth yc.

  Determine the total number of unit cells in the foil

aluminum foil used to package food is approximately 0.001 inch thick. assume that all of the unit cells of the aluminum are arranged so that a is perpendicular to the foil surface.

  How many particles would be present in a cubic meter

How many particles would be present in a cubic meter of aerosol at the concentration of the U.S. PM-10 standard or 50 micrograms/cubic meter if the particles are .1 micrometer in diameter.

  Calculate the pressure in point 1 and the density of fluid

A U manometer reads 20 cm air as operating fluid and a given manometric fluid. A single branch closed tube reads 35 cm connected to point 1. If P2 = 1.2 ATM calculate the pressure in point 1 and the density of the manometric fluid.

  Determine the factors of safety against sliding

assume hydrostatic uplift varies uniformly from full hydrostatic head at the heel of the dam to zero at the toe. consider 1m length of dam.

  What is the pm concentration in micrometers per dcsm

The total gas volume that flowed through the dry gas meter was 2.785 cubic meters (at T = 60 deg F and P = 800 mm Hg). The mass of PM (particulate matter) was 1.50 g. Also, 72.0 g of H20 was collected in impingers.

  Calculate amount of suspended solids accumulating each day

A sedimentation basin is used to remove suspended solids from a wastewater. The rate of flow of wastewater into the tank is 10 L/s, and the influent concentration of suspended solids is 200 mg/L.

  Determine the thickness for the slab and select the size

A solid one-way slab is to be used for a framing system Column spacing is 33 ft, with regularly spaced beams occurring at 11 ft center to center. Superimposed dead load on the structure is 50 psf and the live load is 75 psf.

  What is the percent decrease in the cross-sectional area

a circular aluminum tube of L=600 mm is loaded in compression by forces P. The outside and inside diameters are d2=75 mm and d1=63mm, respectively. A strain Gage is placed on the outside of the tube to measure normal strains in the longitudinal di..

  Determine the total force in the connection at the end

At the end of a 0.6-m diameter pipe, the pressure is 270 KN/m2. The pipe is connected to a 0.3-m diameter nozzle. If the flow rate is 1.1 CMS, determine the total force in the connection

  What is the probability of no health hazard in 30 days

Air pollution in a city is caused by the following four sources: vehicle exhaust (V), industrial exhaust (I), dust (D), and pollen from plants and trees (T). On a particular day, the likelihood of air pollution caused by these sources is 4:3:2:1, ..

  Horizontal axle passing through center

A 75g , 30cm--long rod hangs vertically on a frictionless, horizontal axle passing through its center. A 12g ball of clay traveling horizontally at 2.5m/s hits and sticks to the very bottom tip of the rod.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd