Determine the new reading along the inclined leg

Assignment Help Civil Engineering
Reference no: EM13211076

The inclined leg differential manometer as shown in Figure 1 below shows a reading along the inclined leg mercury manometer of 50mm. Determine the pressure difference between A and B. If the pressure in pipe B is decreased 10 kPa and the pressure in pipe A remains unchanged, determine the new reading along the inclined leg of the mercury manometer.

Reference no: EM13211076

Questions Cloud

Determine the stresses in the steel and concrete : determine the stresses in the steel and concrete under the service loads
What is the station of the pt : a horizontal curve on a single-lane highway has its PC at station 124 + 10 and its PI at station 131 + 40. The curve has a superelvation of 0.06 ft/ft and is designed for 70 mi/h. What is the station of the PT?
Explain the chloroform would remain as liquid in the flask : the chloroform would remain as liquid in the flask after equilibrium is established between liquid and vapor chloroform? (the vapor pressure of chloroform at 20 degrees C is 0.208 atm)
What is the net force acting on the body : Starting from rest, a 4.0-kg body reaches a speed of 8.0 m/s in 2.0 s. What is the net force acting on the body?
Determine the new reading along the inclined leg : If the pressure in pipe B is decreased 10 kPa and the pressure in pipe A remains unchanged, determine the new reading along the inclined leg of the mercury manometer.
How would the economies of construction be obtained : For a metal and wood structure, how would the economies of construction be obtained (pertaining to the mean and standard deviation of a probability of failure graph)?
Explain vessel of fixed volume and at a temperature : The two phases are allowed to come to equilibrium with their product ammonia in a vessel of fixed volume and at a temperature
State the equivalence volume ve of the titration in ml : consider the titration of 25.00ml of 0.650 M propanoic acid, HC3H5O2 ( Ka = 1.3 X 10^-5), with 0.750 M sodium hydroxide, NaOH, and answer the following questions?
Find out the minimum concentration of koh required : Potassium hydroxide is used to precipitate each of the cations from their respective solution. Determine the minimum concentration of KOH required for precipitation to begin in each case.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Heat exchanger second-law efficiency

The condenser in a refrigerator receives R-134a at 700 kPa and 50C, and it exits as saturated liquid at 25 C, The flow rate is 0.1 kg/s,and the condenser has air in at an ambient temperature of 15 C and leaving at 35 C. Find the minimum flow rate ..

  Find the force

Two smooth circular cylinders of weight w=500N and radius r=200mm are connected at their centres by a string AB of length 600mm and rest upon a horizontal plane.

  What is the design storage and water surface elevation

What is the design storage and water surface elevation at the peak outflow rate and estimate the long-term average reduction (EPA, 1986) in particulates under dynamic conditions.

  Explain cbr method of pavement design

Explain CBR method of pavement design with one example.

  Estimate the median and 90th percentile load

Estimate the median and 90th percentile load of SS contained in the runoff. Note: COV = coefficient of variance

  Spreader beam and hoisted by a crane

The 3.5mg engine is suspended from a 500 kg spreader beam and hoisted by a crane which gives it an acceleration of 4m/s^2 when it has a velocity of 2m/s. determine the force in chains AC and AD during the lift.

  Coefficient of static friction between pacakges

The belt starts from rest at time t=0 and its speed increases at a constant rate of 150mm/s^2. Knowing that the coefficient of static friction between the pacakges..

  What is the amplitude of the vertical vibration

if the enginer is mounted floatiing on very weak spring, what is the amplitude of the vertical vibration of the engine? (b) if the engine is mounted solidly on a rigid foundation, what is the alternating force amplitude transmitted? Assume the con..

  Explain light-voice controlling system

Light-Voice Controlling System. We are planning to design a new light-voice controlling system. The voices will basically coordinate the crossing of a road by blind people. Suppose the crossing will be operated by two coordinated systems

  Chlorination tank for killing microorganisms

You are to design a chlorination tank for killing microorganisms in the effluent from a wastewater treatment plant. It is necessary to remove 99% of active bacteria in a wastewater flow of 120 m 3 /hr.

  What are the surface overflow rate

a rectangular clarifier with a length:width ratio of 3:1 receives a flow of 850m3/day. the clarifiers depth is 4.0m and the detention time of the water inthe clarifier is 2.4 hrs, what are the surface overflow rate and the horizontal flow through ..

  Define mechanical engineering dynamics

Important information about Mechanical engineering dynamics, A 3000 lb car rests on a horizontal street out of gas with its brakes locked.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd