Determine the moment of the force about line joining points

Assignment Help Civil Engineering
Reference no: EM13210839

the triangular plate ABC is supported by ball and socket joints at B and D and is held in the position shown by cables AE and CF. If the force exerted by cable AE at A is 1000N , determine the moment of the force about line joining points D and B.

Reference no: EM13210839

Questions Cloud

What types of quality management tools : What are two or three quality management tools used in data collection? What types of quality management tools do you utilize to make personal or business decisions? How do you use these tools in the decision-making process?
What is the amount of real consumption in year : What is the amount of real consumption in year 1? In year 2? In year 10? In year 20 and show that this is consistent with your calculation using nominal rates.
Calculate the relative compaction : A dam project specifies 97% compaction. Lab tests on the soil being used indicate that it has a maximum dry density of 1900 kg/m3 at an optimum water content of 13.2%. Field tests give the following results: Field dry density is 1790 kg/m3 and 16...
What are the important findings : What are the important findings in Austin Road Co. v. OSHRC and Builders Steel Co. v. Marshall? Your response should be approximately 200 - 300 words and include a reference citation for your response.
Determine the moment of the force about line joining points : the triangular plate ABC is supported by ball and socket joints at B and D and is held in the position shown by cables AE and CF. If the force exerted by cable AE at A is 1000N , determine the moment of the force about line joining points D and B.
Compute the amount of product that was lost in the filtrate : Estimate the amount of product that was lost in the filtrate, assuming that the volume of the reaction mixture was 1.0 mL when you collected the product by vacuum filteration.
Soviet socialist republic, with its capital at mensk : Which former Soviet Socialist Republic, with its capital at Mensk (Minsk), is also called White Russia, and is still strongly linked to Moscow?
Calculate the ratio of area to volume for unit cube : calculate the ratio of area to volume for unit cube a unit sphere in inscribed inside the cube, and as write cylinder inscribed inside the cube.
Determine the cartesian coordinates of the anchor : A fisherperson, pulling on the anchor cord, causes a force on the man of F=(40i+20j-50k)N. If the cord is 30m long,determine the Cartesian coordinates of the anchor at A. Assume that cord OA is a straight line.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Define energy transfer in mechanical systems

Energy transfer in mechanical systems, A wheel is 800mm in diamiter and has a mass of 1000kg. on a horizontal surface without skidding, the vehicle accelerates uniformly at 0.5m/s^2 for 5 seconds.

  Load that a boat can carry without sinking in a lake

The hull of a boat has a volme of 150m and the total mass of the boat when empty is 8560kg. determine how much load this boat can carry without sinking in a lake.

  What superelevation rate would you recommend

What superelevation rate would you recommend for a roadway with a design speed of 100 km/hr and a radius of curvature of 500 m? Assume f = 0.11.

  Purposes of assessing an economys growth performance

For the purposes of assessing an economy's growth performance, which is the more important statistic, real GDP or nominal GDP? Why?

  Find the lateral area of the frustum

a regular hexagonal pyramid has an upper base edge of 16 ft. and a lower base edge of 28 ft. if the volume of the frustum is 18041 ft^3., find the lateral area of the frustum.

  Mass flow raw through the nozzle

Air enters an adiabatic nozzle steadily at 300 kPa, 200 o C, and 30 m/s and leaves at 100 kPa and 180 m/s. The inlet area of the nozzle is 80 cm 2 . Determine (a) the mass flow raw through the nozzle, (b) the exit temperature of the air, and (c) the ..

  Calculate the forces exerted by the water on the bend

Water flows through a horizotal 45 deg reducing bend with a 36 inch. diameter upstream and a 24 inch diameter downstream, at the rate of 20 cfs under a pressure of 15 psi at the upstream end of the bend. Neglecting head loss in the bend, calculate..

  What must be the standard deviation

A distance of 1000 feet is to be taped in a manner to ensure a standard deviation smaller than ±0.06 feet. What must be the standard deviation per 100-ft tape length to achieve the desired precision?

  Volume of soil-excavated from the borrow pit

The volume of fill required is 2500 cubic meters. Find the volume of soil that must be excavated from the borrow pit to furnish the required volume of fill. (in cubic meters).

  Maximum deflection of the beam

Determine the deflection of the right end of the pointer and the maximum deflection of the beam.

  What is the annual power cost of the ro system

Is the system within membrane manufacturer's warranty requirement of maximum flux rate of 14 gfd? What is the annual power cost of the RO system?

  How fast is the reservoir surface dropping

The flow out of a reservoir is 2 L/s. The reservoir surface is 5 m x 5 m. How fast is the reservoir surface dropping?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd