Determine the minimum number of expansion joints required

Assignment Help Mechanical Engineering

Reference no: EM13625425

A bridge to be fabricated of steel girders is designed to be 500 m long and 12 m wide at ambient temperature (assumed 20 degrees C). Expansion joints will be provided to compensate for the change in length in the girders as the temperature varies. Each expansion joint can compensate for a maximum of 20 mm of change in length. From historical records it is estimated that the minimum and maximum temperatures in the region will be -35 degress C and 40 degrees C, respectively. Determine the minimum number of expansion joints required and the length that each bridge section should be fabricated.

Reference no: EM13625425

Questions Cloud

Consider two identical 76 microcoulomb point charges placed : consider two identical 76 microcoulomb point charges placed 73 cm apart. let there be a 1 nc 1 nanocoulomb 1e-9

Which is supported on the opposite side is the engine mount : a 2 cm by 2 cm by 2 cm rubber engine mount e 30 mpa poisson ratio 0.4999 must support a 300 kg motor. what maximum

Agents at an insurance company office in a small town : agents at an insurance company office in a small town process an average of fifteen auto insurance claims per week.

A converging lens with focal length of 20cm is located 10 : a converging lens with focal length of 20cm is located 10 cm to the left of a diverging lens having a focal length of

Determine the minimum number of expansion joints required : a bridge to be fabricated of steel girders is designed to be 500 m long and 12 m wide at ambient temperature assumed 20

The following is the heart rate for 10 randomly selected : the following is the heart rate for 10 randomly selected patients on the unit. find the mean variance and standard

What is the absolute pressure at a point that is 770 cm : mercury is poured into a tall glass. ethyl alcohol which does not mix with mercury is then poured on top of the mercury

Which is that hardness is measured as the applied load : one of the inspectors in the quality control department has frequently used the brinell and rockwell hardness tests for

Driving a 2000-ft loaded horizontal conveyor at 4 fts : driving a 2000-ft loaded horizontal conveyor at 4 fts requires 35hp. what horsepower would be required if the conveyor

User Account

All Pages