Determine the minimum height on the wall from hose

Reference no: EM13302693

Determine the minimum height on the wall to which the firefighter can project water from the hose, so that the water strikes the wall horizontally. The speed of the water at the nozzle is Vc=48ft/s. Distance from the hose to the wall is 30ft. and vertical distance from the ground to the hose is 3ft. No angle is given.

Reference no: EM13302693

Questions Cloud

What avg thickness must engineer build to meet specification : an engineer uses a standard technique for measuring the thickness of a clay landfill liner that has a typical standard deviation of 0.7 in. The project specifications require the liner thickness to be 36 inches or more, at least 95 percent of the ..

Does trade make poor nations poorer : Does trade make poor nations poorer? What is foreign direct investment? Discuss the positive and negative impact that FDI has on economic development. Explain why governments use reduced tariffs, taxes, and other incentives to encourage foreign compa..

A project manager by the ceo of the abc firm : You have recently been hired as a project manager by the CEO of the ABC Firm, a large manufacturing firm (just one division of the XYZ Conglomerate Corporation).

What is the fundamental frequency of the wire : A 24 cm long wire with a linear density of 16.5 g/m passes across the open end of a 87 cm long open-closed tube of air. If the wire, What is the fundamental frequency of the wire

Determine the minimum height on the wall from hose : Determine the minimum height on the wall to which the firefighter can project water from the hose, so that the water strikes the wall horizontally. The speed of the water at the nozzle is Vc=48ft/s.

Sequencing to identify the abnormality : A report of a newly identified syndrome in families of the Old Order Amish showed that the lethal condition that resulted from numerous, multisystem abnormalities is inherited as an autosomal recessive. SNP-based mapping showed that a portion of a re..

Determine by trigonometry the required angle of forces : two forces applied as shown to a hook support. knowing that the magnitude of P is 35 N, determine by trigonometry the required angle if the resultant R of the two forces applied to the support is to be horizontal and the corresponding magnitude of..

What voltage is generated between the wingtips : A Boeing 747 jet with a wingspan of 60.0 m is flying horizontally at a speed of 324 m/s over Phoenix, What voltage is generated between the wingtips

Determine the temperature rise that will cause joint to fail : the block is fitted between the fixed supports. if the glued joint can resist a maximum shear stress of T(allow)=2ksi, determine the temperature rise that will cause the joint to fail. Take E= 10(10^3)ksi, v=0.2

User Account

All Pages