Determine the maximum and torsional shear stress

Assignment Help Civil Engineering
Reference no: EM13307526

A thin-walled circular tube has an average diameter of 100 mm and a wall thickness of 4 mm. It is subject to torque of 4 kNm and a compressive axial force of 40 kN.
Determine the maximum shear stress (magnitude and direction of normal to the plane on which it acts). In your calculations, use the average torsional shear stress?

Reference no: EM13307526

Questions Cloud

How wide is the aperture : A point source of light illuminates an aperture 2.00m away. How wide is the aperture
What is the role of the project manager : What other additional information would you like to share with the class?
How does this compre to the diameter of the milky way : The bright core of a certain Seyfert galazy had a luminosity of 10^10 L. The luminosity increased by 100% in a period of 18 months. How does this compre to the diameter of the Milky Way
What does it mean to take a systems view of a project : As an IT project manager, you may take a systems view of a project.
Determine the maximum and torsional shear stress : A thin-walled circular tube has an average diameter of 100 mm and a wall thickness of 4 mm. It is subject to torque of 4 kNm and a compressive axial force of 40 kN.
Write a program that generates a sequence of 20 random value : write a program that generates a sequence of 20 random values between 0 and 99, prints the sequence, sorts it, and prints the sorted sequence. use the sort function form the standard C++ library.
How much gasoline is burned during each cycle : A gasoline engine in a large car takes in 10,500J of heat and delivers 2450J of mechanical work per heat cycle. How much gasoline is burned during each cycle
Write an assembly language program that computes the product : Write an assembly language program that computes the product of two nonnegative integers a x b using IJVM instructions and 8088 MIC-1 MMV simulation environment.
Pestel analysis for the milo company in singapore : Marketing mix - PESTEL analysis for the milo company in singapore

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the distiniction b/n point and non point sources

what is the distiniction b/n point and non point sources of water pollution and thier varation with surface and ground water?

  How long is the irrigation boom from the center pivot

1.How long is the irrigation boom (in feet) from the center pivot to its farthest extent. 2.If the irrigation boom makes 4 full revolutions in a day, how many miles does the end of the boom travel in 4 days.

  What policies were implemented during

what policies were implemented during and after WW1,WW2,Cold war?

  Calculate specific internal energy of water leaving valve

Water is at 9000 kPa and 300 degrees celcius and flows through a partially open valve. Pressure immediately after the valve is measured to be 600 kPa. Calculate the specific internal energy of the water leaving the valve

  Find the correction for the calibration of the measuring tap

Find the correction for the calibration of the measuring tape using its formula. During the calibration of the measuring tape on comparator of 100.000m the length of the tape turned out to be of 99.993m

  Discuss the limitations of the monitoring approach

A passive dosimeter is to be designed for use in obtaining monthly average concentrations of atrazine in a stretch of river. Typical concentrations range from 10 to 50 g/L. Atrazine, a herbicide commonly found in runoff from agricultural lands.

  How many trips would one rubber-tired herrywampus have

How many trips would one rubber-tired Herrywampus have to make to backfill a space with a geometrical volume of 5400 cubic yard. The maximum capacity of the machine is 30 cubic yard (heaped), or 40 tons.

  Determine what was the major principal stress at failure

A consolidated-drained triaxial test on a normally consolidated clay yielded a friction angle of 28°. If the all-round confining pressure during the test was 140 kN/m2, what was the major principal stress at failure.

  Determine the horizontal spacing of the vertical drain

determine the horizontal spacing of the vertical drains if the drains are installed in triangular grid to reach 90% of primary consolidation in 1.5 years after the commencement of fill placement

  Determine the dead load per unit of length on a beam

A floor system consists of wide flange steel beams (W18 x 60) equally spaced at 8ft center to center. A 6inch reinforced concrete slab spans between beams. The bottom of the slab is coated with plaster and the top of the slab has ¾inch hardwood fl..

  Under what condition will both the soil have the same weight

Given Specific Gravity for Soil A is 2.00 and Specific Gravity for Soil B is 4.00, under what condition (Volume of Soil A and Soil B) will both the soil have the same weight

  Surface overflow rate-horizontal flow through velocity

A rectangular clarifier with a length:width ratio of 3:1 receives a flow of 850m3/day. the clarifiers depth is 4.0m and the detention time of the water inthe clarifier is 2.4 hrs, what are the surface overflow rate and the horizontal flow through ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd