Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
1.What is coincident draft (demand)?
Why it is necessary in water resource engineering?
2.A spring is used to stop a 50 kg package which is moving down a 20 degree incline. the spring has a constant of 30kN/m and is held by cables so that it is initally compressed 50mm. knowing that the velocity of the package is 2 m/s when it is 8 m from the spring and neglecting friction, determine the maximum additional deformation of the spring in bringing the package to rest?
Determine the self weight, moment of inertia, and cross-sectional areas for the following hot rolled standard section:
how do i solve this problem a 14 in diameter rod must be machined on a lathe to a smaller diameter for use as a
What is your recommendation for the maximum size of coarse aggregate for the following situation? A continuously reinforced concrete pavement cross section contains a layer of No. 6 reinforced bars at 15.24 cm centers,
The only losses of total phosphorus for the lake are settling and fluching throught the lake's outlet. Assume the outflow rate is 212 km^2/year and the sediment area is 10,500 km^2.
Design a system to pump water 80 degrees C from a water heater to a washing system. Desired minimum flow rate is 750 Liter per min.
A long wide rectangular channel carries a steady flow rate of 35 m2s-1 (flow per unit width) and passes through an abrupt change in slope from 0.005 (upstream of the change) to 0.003 (downstream).
The total volume of a soil specimen is 120 cm3 and its total mass is 220g. Specimen porosity is 0.4 and specific gravity of solids is 2.66 Determine the following: (a) water content, (b) void ratio, (c) degree of saturation, and (d) dry density.
A non-reactive chloride solution is continuously discharged into an aquifer. The concentration at the discharge location is 800 mg/L. Determine the maximum concentration of chlorides to be observed at an observation well 30 m downstream of the disc..
Given copper and PVC pipe segments analyze which pipe is morelikely to fail in the modes of Compression, Tension,Shear, Bending, and Buckling. Both pieces are the samesize.
Vehicles arrive at a freeway on-ramp meter at a constant rate of six per minute starting at 6:00A.M. Service begins at 6:00A.M. such that u(t)=2+0.5t, where u(t) is in veh/min and t is in minutes after 6:00A.M.
The copper pipe has an outer diameter of 2.50 in. and an inner diameter of 2.30 in. if the allowable shear stress in the pipe is 2 ksi, what portion of the tube needs to be reinforced
What is the TCE concentration in ppm if the tank is held at (a) 4 degrees C and (b) 35 degrees C (c) What is the TCE concentration in ppm if the tank is filled with hexane instead of water
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd