Determine the max static stress the component must sustain

Assignment Help Civil Engineering
Reference no: EM13313250

The heat resisting alloy S-590 is used for a component that will be exposed to 700°C. With a safety factor of two on the time, determine the maximum static stress the component must sustain in order to have a service life of 10000 hours.

Reference no: EM13313250

Questions Cloud

Case study on erp project implementation : Vito was now interested in finding out what the new critical path will be. Furthermore, Vito wanted to start work on the project by July 01, 2013 and wanted to know when the project would be completed.
Internal to the health care provider or external : Discuss the focus of each model; internal to the health care provider or external to the health care provider, and summarize the main constructs of each model
Compute the maximum service concentrated live load : A 12-ft-long cantilever supports its own dead load plus an additional uniform service (unfactored) dead load of 0.5 kip/ft. The beam is made from normal-weight 4000-psi concrete and has in., in., and in.
Problem with an exercise about cournot game : A problem with an exercise about Cournot game. It is very complex and it is composed by different question and it is impossible for me to write the complete text.
Determine the max static stress the component must sustain : With a safety factor of two on the time, determine the maximum static stress the component must sustain in order to have a service life of 10000 hours.
What approach do you use for project identification : What approach do you use for project identification?
Depict an example of the change in molar volume : Draw an example of the change in molar volume during a 1st and 2nd order phase transition vs. temperature.
Determine max temperature the component must be exposed : Using a safety factor of two based on the stress, determine the maximum temperature the component must be exposed to for it to sustain the stress for at least 1000 days.
Video case dick learns about tipping : Video Case-"Dick Learns About Tipping"

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the final pressure in the device

A .2kg mass of argon gas fills a .05m^3 piston-cylinder volume at a pressure of 400 kPa absolute. The piston induced pressure is changed until the volume expands to twice its original value, while the temperature remains constant.

  Compare prismoidal volume to the corrected end area volume

Calculate the prismoidal correction and compare the prismoidal volume to the corrected end area volume. Station Left Center Right Area (sq. ft.) 1+00 C7.0/ C8.2/ C8.5/ 256.90 31.3 0.0 24.5 1+50 C5.3/ C5.0/ C3.5/ 207.62 29.5 0.0 21.8 2+00

  Find the force that these gas generates on the top

the circular top of a can has a radius of .0320m. the pull-tab has an area of 3.8x10^-4 m^2. the absolute pressure of the carbon dioxide in the can is 1.40x10^5Pa. find the force that these gas generates on the top of a can?

  Determine the percent decrease in density of the gas

The density of an ideal gas decreases by 10% when compressed isothermally from 10 atm to 11 atm. Determine the percent decrease in density of the gas if it compressed isothermailly from 1000 atm to 1001 atm.

  Calculate maximum compressive and maximum tensile stresses

Consider a wide flange steel beam of size W10x60 subjected to a negative bending moment of 24 kip ft. Calculate the maximum compressive and maximum tensile stresses and indicate where the stress will be tensile and where compressive.

  What types of attacks can still occur

Do the administrators of server systems still have to be concerned about, and take further countermeasures against DoS attacks, if so, what types of attacks can still occur, and what measures can be taken to reduce their impact?

  Determine when would the wells start interfering each other

One of the wells pumps at a rate of 1,240 m^3/ day. The second well pumps at 850 m^3 / day. If the aquifer has a T= 2000m^2 / day and a storage coefficient of 0.0004, when would the wells start interfering each other

  Calculate percipitable water in standard atmoshperic column

Calculate the percipitable water (mm) in a 10-km high standard atmoshperic column if the surface conditions are temperature=20 degrees C, pressure=101.3 kPa and the laspe rate is 6.5 degrees C/km.

  Di-atomic ideal gas

Air can be assumed as a di-atomic ideal gas. Find the final temperature and the amount of work ( in kW) required for air compression at a rate of 100 mol/s , from an initial condition of 1 bar an 25 C to 10 bar; for the following ways:

  Determine horizontal force between the tires and the ground

A 5000 lb truck is being used to lift a 1000 lb boulder B that is on a 200lb pallet A. Knowing the acceleration of the truck is 1ft/s^2, determine a) the horizontal force between the tires and the ground, b) the force between the boulder and the p..

  How much power is required to overcome aerodynamic drag

a new sports car has a drag coefficient of 0.30 and a frontal area of 21 ft^2, and is traveling at 119 mi/h. how much power is required to overcome aerodynamic drag if p = 0.002378 slugs/ft^3

  Explain how to estimate the los at the corridor

An airport corridor is 30 ft wide. given a peak demand of 300 pedestrians per minute and an average walk speed of 3 ft/s, estimate the LOS at the corridor

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd