Determine the magnitude of theacceleration at the instant

Assignment Help Civil Engineering
Reference no: EM13541253

1.A train starts from station A and for the first kilometer, it travels with a uniform acceleration. Then for the next two kilometers, it travels with a uniform spped. Finally, the train decelerates uniformly for another kilometer before coming to rest at station B. If the time for the whole journey is six minutes, draw the v-t graph and determine the maximum speed of the train

2.A 1-mile-long racetrack is to be designed with a 1/4-mile turns at each end. Determine the superelevation rate for a design speed of 70 mph, assuming f=.20.

3.A car travels along a horizontal circular curved road that has aradius of 600 m. If the speed is uniformly increased at a rate of2000 km/ h2 , determine the magnitude of theacceleration at the instant the speed of the car is 60 km/h.

Reference no: EM13541253

Questions Cloud

What type of aquifer material do you expect in this location : The elevation of water in well A is 300m above sea level and well B is 350m above sea level. The wells are 45m apart. A dye test reveals that the specific discharge between the two wells is about 2.75m/day. What type of aquifer material do you expect..
Where can grep be found for windows for linux : What is grep? Where can grep be found for Windows? For Linux?
What are the options for developing a simulation model : What are the options for developing a simulation model? What are the fundamental trade-offs?
Describe three different ways to generate random numbers and : Describe three different ways to generate random numbers and explain for each of the four properties (from (a0) which is “yes” and which is “no”.
Determine the magnitude of theacceleration at the instant : A car travels along a horizontal circular curved road that has aradius of 600 m. If the speed is uniformly increased at a rate of2000 km/ h2 , determine the magnitude of theacceleration at the instant the speed of the car is 60 km/h.
What is the daily compound rate of interest : An engineer in a developing country observes that his project bankaccount has grown from 1,600,000 to 1,769,279 (local currencyunits) in 20 days with no deposits or withdrawals being made. He knows the account interest is compounded daily.
What was the distance between the markers : The acceleration of a particle traveling along a straight line is A= (0.02e^t) m/s^2, where t is in seconds.  If v=0, s=0 when t = 0, determine the velocity and acceleration of the particle at S= 4m
Determine the young modulus for a metal whose : Determine the young's modulus for a metal whose elasic limit isone half of its UTS. The material has a strain of 0.002 at theelastc limit and a gauge length of 50mm. The UTS of the metal is300 MPa. The metal sample has a diameter of 20mm.
Draw the shear and moment diagrams,ensuring to label : The joists from the previousquestion are supported by concrete beams that are 300mm wide by 500mm deep. The concretebeams span 8.4m. Assume the beam is also simply supported. The weight of the joistis 1.04 KN/m.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the mass of air in a closed chamber measuring

Find the mass of air in a closed chamber measuring 35 ft by 20 ft by 10 ft, when the pressure is 17 lb/in^2 and the temperature is 75°F, assuming air to be an ideal gas

  Is the state water-quality standard being met downstream

If the state standard downstream is not met, the state has informed town 1 that it must treat its sewage further so the downstream standard is met. Use a mass balance approach to show that the state's request is unfeasible.

  Determine what is the resulting solids concentration

Raw primary sludge at a solids concentraion of 4% is mixed with waste activated sludge at a solids concentration of .5%. The flows are 20 and 24 gal/min respectively. What is the resulting solids concentration

  Find range of values of p for which equilibrium is maintain

knowing that the coefficient of static friction between the collar and the rod is .35, determine the range of values of p for which equilibrium is maintained when 0=50deg and M=20Nm

  What concentration of fe needed to maintain phosphate

FeCl3 is added to remove excess phosphate. The following reactions occur (the charges are in parentheses): FeCl3 -> Fe(3+) + 3Cl(-) Fe(3+) + PO4(3-) -> FePO4 The equilibrium constant for the second reaction is 10^26.4.

  Determine the elevation of x and y which is required

The elevation of Y is 5265.879 ft. The elevation of X is required. Instrument at X: +S = 3.182,-S = 9.365,9.370, and 9.368. Instrument at Y: +S = 10.223; -S = 4.037,4.041, and 4.038. Find the elevation of X

  Effect of acidic water on strength of soil used to store

effect of acidic water on strength of soil used to store the water. the reduction in strength at various acidic ph

  Determine the approximate dimensions of each carbon bed

A two-bed carbon adsorption system is to be designed to handle 8000 acfm of air containing 700 ppm of hexane. Laboratory studies indicate that carbon can adsorb 8lb hexane per 100 lb carbon under the conditions

  Coefficient of permeability of concrete

How does aggregate size influence the coefficient of permeability of concrete? List other factors that determine the permeability of concrete in a structure.

  Determine expressions for attractive and repulsive energies

Consider some hypothetical X+ - Y - ion pair for which the equilibrium interionic spacing and bonding energy values are 0.38 nm and - 6.38 eV respectively. If it is known that n in the equation has a value of 10

  Calculate the height of the airplane above sea level

The pressure gage on an airplane flying overhead indicates that the atmospheric pressure at that point is 9.7 psia and that the air temperature is 42 deg. Fahrenheit. Assume a linear decrease of temperature with elevation

  Determine how large must the reactor be

A CMFR is to be designed to remove contaminant A from water with a steady-state efficiency of 95 percent. The decay reaction is zeroth order, with a rate constant of 0.1M/h. The inlet concentration of A is 0.5 M.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd