Determine the lift force l and drag force d on a scale model

Assignment Help Civil Engineering
Reference no: EM13316857

a wind tunnel is used to experimentally determine the lift force L and drag force D on a scale model of an aircraft. the bracket supporting the aircraft is fitted with an axial spring with stiffness k= 0.125 N/mm and a torsional spring with stiffness kt=50 NM/rad. by measuring the deflections of these springs during a test, the forces L and D may be determined. If the geometry occurs when there is no airflow. determine L and D if delta= 2.51mm and theta is 1.06 degrees are measured

Reference no: EM13316857

Questions Cloud

Calculate difference in the level of mercury : venturi tube is a device made to measure pressure differences as the fluid (air density = 1.2kg/m^3) flows through a constriction. calculate difference in the level of mercury
What is the mass of the box : a child does 350 J of work while pulling a box from the ground up to his tree house with a rope the tree house is 8.4 m above the ground
Determine the maximum moment that can be carried : A rectangular reinforced concrete beam with dimensions b = 14in, d = 25in, and h = 28in is reinforced with three No. 10 bars. Material strengths are fy = 60,000 psi and fc prime = 5,0000 psi.
What is the typical distance : ice, liquid water, and water steam are three phases oof the same substance, meaning, what is the typical distance between water molecules in the liquid phase of water
Determine the lift force l and drag force d on a scale model : a wind tunnel is used to experimentally determine the lift force L and drag force D on a scale model of an aircraft. the bracket supporting the aircraft is fitted with an axial spring with stiffness k= 0.125 N/mm and a torsional spring with stiffn..
How large is the torque exerted by the batter''s hand on bat : A baseball batter sets up in the batting box and holds his bat still over the plate for a moment. How large is the torque exerted by the batter's hand on the bat
Define what speed would the train have to be traveling : The beam is positioned such that the observer on the train measures an angle of 19 between the crossbeam and the floor of the train. At what speed would the train have to be traveling in order for an observer standing outside the train
Find the maximum extension of the spring : a horizontal spring mass system oscillates on a frictionless table. find the maximum extension of the spring
How fast was the car initially traveling : a car heading north collides at an intersection with a truck heading east. if they lock together and travel 28 m.s at 46 degrees north of east just after the collision, how fast was the car initially traveling

Reviews

Write a Review

Civil Engineering Questions & Answers

  How much will each leg shorten under the applied

given that E for the tube material is 70 GN/m2 and the stool legs are 75cm long, how much will each leg shorten under the applied compressive load (take g = 9.8m/s2)

  What is final dissolved oxygen concentration in waste lagoon

An agricultural waste lagoon has a total volume of 500 m^3 and has an initial dissolved oxygen (DO) level at the saturation for 20 °C. This waste lagoon receives a discharge of 1,750 L of runoff containing an ammonium loading of 500 mg as N per li..

  Find dry unit weight-void ratio and degree of saturation

A soil specimen has a water content of 18% and a wet until weight of 118.5 lb/ft. The specific gravity of solids is found to be 2.72. Find the dry unit weight, void ratio, and degree of saturation.

  Determine the magnitude and direction of the resultant force

determine the magnitude of the resultant force and its direction, measured counterclockwise from the positive axis. The other force is F=700N with a 15 degree angle to the x-axis.

  Determine thermal efficiency and mass flow rate of cooling

A simple steam power plant operates at steady state with water circulating through the components with a mass flow rate of 100 kg/s. Stray heat transfer, kinetic energy and potential energy effects are negligible.

  Calculate the time till the smoke layer is from the floor

A room has a floor area of 500 m^2 and a height of 4 m. THe room is involved in a fire with a constant energy release rate of 1 MW. calculate the time till the smoke layer is 1.5 m from the floor for (a) the case where the leakage areas are at the ..

  Calculate distance downwind xl at which the plume released

A powerplant is burning coal on a cold, clear winter morning at 8am with a wind speed of 2.6m/s measure at 30m and an inversion layer with its base height of 697m. The effective stack height is 30m.

  Determine min horizontal force p required to hold the crate

Determine the minimum horizontal force P required to hold the crate from sliding down the plane. The crate has a mass of 70kg and the coefficient of static friction between the crate and the plane is μs = 0.45.

  Explain how to compute the disclosure and elevation of a

Reciprocal leveling gives the following readings in feet from a setup near A: on A, 2.071; on B, 8.254, 8.259 and 8.257. At the setup near B: on B, 9.112; on A, 2.926, 2.930 and 2.927. The elevation of B is 1099.600. Compute the disclosure and ele..

  Determine what force p is required to hold the gate in place

The air above the liquid is under a pressure of 5 psig, and the specific gravity of the liquid in the tank is 0.80. If the rectangular gate is 6 ft wide and if y1 = 1 ft and y2 = 10 ft, what force P is required to hold the gate in place

  Parabolic trajectory of the falling prey

A hawk flying at 2 m/s at an altitude of 45 m accidentally drops its prey. The parabolic trajectory of the falling prey is described by the equation below until it hits the ground, where y is its height above the ground and x is its horizontal dis..

  Determine the actual field weight required to mix a 4 bag

Determine the actual field weight required to mix a 4 bag mix using the mix proportions given below. The excess moisture contet of the sand is 6% and that of the gravel is 2% Component Weight ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd