Determine the irr of building the corrosion-resistant tower

Assignment Help Civil Engineering
Reference no: EM13313864

HZ Wireless must rebuild a cell tower recently destroyed by a tornado. A tower made of normal steel (NS) will cost $30,000 to construct and should last 15 years. Maintenance will cost $1000 per year. If corrosion-resistant steel (CRS) is used, the tower will cost $36,000 to build, but the annual maintenance cost will be reduced to $250 per year.

a. Determine the IRR of building the corrosion-resistant tower. (Hint: Calculate interest rates from 7% to 11% using formulae provided in tables).

b. If HZ requires a return of 9% on its capital projects, which tower should be chosen? (Use linear interpolation for the IRR between integral values).

c. If the design life is just 5 years, which tower should be chosen and why?

Reference no: EM13313864

Questions Cloud

Determine what would be the carbon emission rate : Suppose in 100 years energy consumption is still 330 Ej/yr, but coal supplies only 20 percent of total demand, natural gas supplies 30 percent, and oil 10 percent. The remaining 40 percent of demand is met by noncarbon-emitting sources.
Analyse the different tools available to a judge : Analyse the different tools available to a judge to interpret the law. To what extent the tools are used effectively by judges?
Implement a class address : A theater seating chart is implemented as a two-dimensional array of ticket prices like presented below. Write a program that prompts the users to pick either a seat or a price. Mark sold seats by changing the price to zero.
How to calculate the cell potential for the reaction : Calculate the cell potential for the following reaction as written at 69 °C, given that [Mg2 ] = 0.876 M and [Fe2 ] = 0.0160 M. Standard reduction potentials can be found here.
Determine the irr of building the corrosion-resistant tower : HZ Wireless must rebuild a cell tower recently destroyed by a tornado. A tower made of normal steel (NS) will cost $30,000 to construct and should last 15 years. Maintenance will cost $1000 per year.
Explain the electrode follows the nernst equation : Assume that the electrode follows the Nernst equation, the temperature is at 25°C, and that the activity coefficient of X is 1.
Determine the new value of l if the flowrate stayed the same : When a channel of triangular cross section was new, a flowrate of Q caused the water to reach L = 2 m up the side of the channel. After considerable use, the walls of the channel became rougher and the Manning coefficient, n, doubled.
Quality management and continuous improvement : Quality management and continuous improvement
Define carbon monoxide gas burns in oxygen : Carbon monoxide gas burns in oxygen to form carbon dioxide gas. Write a balanced equation for the reaction and determine the volume of oxygen needed to react completely with 561 mL of CO at 40.0°C and 1.00 atm.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Designing the tangent vertical curve

Due to a street crossing a roadway, the elevation of the roadway at station 3 +413.760 must be at 129.388 m. Design the curve?

  Find the principal moments of inertia and the principal axes

find the inertia tensor about the origin for a mass of uniform density=1,inside the part of the unit sphere where x>0,y>0,and find the principal moments of inertia and the principal axes.

  Compute the after-tax rate of return using straight line

A $78,000 invtestment in machinery is proposed. It is anticipated that this investment will cause a reduction in net annual operating disbursements fo $16,300 a year for 12 years. The investement will be depreciated for income tax purposes

  Will the pce standard of 5 microgram per l be exceeded

If an 18.9 L (5 gallon) bucket of PCE is released (and equally distributed) into a 3.79x10^8 L (100,000,000-gallon) aquifer, will the PCE standard of 5 microgram/L under the Safe Drinking Water Act be exceeded

  Find the tension in the cord when the radius is given

The ball is kicked so that it has a velocity of 0.5 m/s and the cord is pulled in at a rate of 0.2 m/s. Neglect friction so that the only important force on the ball is the tension in the cord. Find the tension in the cord when the radius is 0.25 ..

  Find value of max average volumetric flow rate of filtrate

The following data were obtained for a plate-and-frame filter of total area A=500 sq cm. operating under a constant pressuredrop of 0.1 atm: Time t (min): 50 75 100 Volume of filtrate V (liter): 9.7 12.3 14.0 The filtrate is essentially water.

  Consolidation ratio of the soil at the unloaded condition

An increment of vertical stress of150kpa compress the sample to a void ratio of1.43. What is the over consolidation ratio of the soil at the unloaded condition.

  What are pressure heads at the interface and at the bottom

A stratified lake could be idealized as two layers: with 7.0 m of fresh water on top and 10.0 m of cold water (specific gravity = 1.02) on the bottom. What are the pressure heads at the interface and at the bottom of the lake, in terms of water col..

  What are the x- and y-coordinates of the resulting center

The section of the plywood in the 3rd quadrant is sawed off and the resulting piece is then glued squarely over the 4th quadrant portion of the plywood with glue of negligible weight.What are the x- and y-coordinates of the resulting center of gra..

  What is the residence time of air in the room if rate is use

On average each student produces 1 kg of carbon dioxide per day. The recommended ventilation rate of fresh air to avoid excessive carbon dioxide buildup is 8 L per second per student.

  Find the load p and stress in the aluminum for the stress

The column is composed of two materials, the inner is brass with a diameter of 100mm and the outer is aluminum with a diameter of 150mm. A rigid flat plate is placed on top to insure that both materials move together when compressed.

  Determine which process requires more energy at atm pressure

Which process requires more energy: completely vaporizing 1 kg of saturated liquid water at 1 atm pressure or completely vaporizing 1 kg of saturated liquid water at 8 atm pressure

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd