Determine the greatest weight of the flower pot

Assignment Help Civil Engineering
Reference no: EM13312215

if each cord can sustain maximum tension of 50N before it fails, determine the greatest weight of the flower pot the cords can support?

Reference no: EM13312215

Questions Cloud

What is the magnitude of the final velocity : A projectile is fired from the edge of a 10m high cliff at 10m/s and an angle of 30 degrees from the horizontal. what is the magnitude of the final velocity
Find average normal stress at the midsection of rod : two solid rods AB and BC are welded together at B and loaded as shown. Knowing that d1=50mm and d2=30mm, find average normal stress at the midsection of rod AB and rod BC.
Determine the magnitude of the acceleration of the car : A racecar starts from rest and accelerates to 100 km/hr halfway around a circular track of a radius 50 m. What is the magnitude of the acceleration of the car
Explain the following equilibrium constants : Given the following equilibrium constants at 427 °C: Na2O(s) 2Na(l) + 1/2 O2(g) Kc = 2 x 10-25 NaO(g) Na(l) + 1/2 O2(g) Kc = 2 x 10-5 Na2O2(s) 2Na(l) + O2(g) Kc = 5 x 10-29 NaO2(s)
Determine the greatest weight of the flower pot : if each cord can sustain maximum tension of 50N before it fails, determine the greatest weight of the flower pot the cords can support
Find what is the mean velocity relative to the cylinder wall : if the sphere falls at a speed of 150mm/s, what is the mean velocity relative to the cylinder wall of the water in the gap surrounding the midsection of the sphere
Explain what is the value of kc for the reaction : A 2.0 L container is charged with a mixture of 6.0 moles of CO(g) and 6.0 moles of H2O(g) and the following reaction takes place: CO(g) + H2O(g) CO2(g) + H2(g) When equilibrium is reached the [CO2] = 2.4 M. What is the value of Kc for the reacti..
What is the maximum height the rocket will reach : A rocket takes off vertically from the launchpad with no initial velocity but a constant upward acceleration of 2.25 m/s2. What is the maximum height the rocket will reach above the launchpad
Explain what is the partial pressure of co(g) at equilibrium : For the reaction CO(g) + H2O(g) CO2(g) + H2(g), Kp = 0.64 at 900 K. If the reaction is initiated with just H2(g) and CO2(g), each at a partial pressure of 0.540 atm, what is the partial pressure of CO(g) at equilibrium

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the temperature of the air in fahrenheit

The "sea-level adjusted" pressure at the airport was about 30.57 inches of mercury. Assuming the density of air is 1.30 kg/m3 and the gas constant for air is 287. J/(kg K), calculate the temperature of the air in Fahrenheit.

  What should the reading be at y to adjust collimation error

a level is setup midway between X and Y reads 5.572 ft on X and 4.946 ft. on Y. The level is setup very close to X and a reading of 4.666 ft. is taken on X. what should the reading be at Y to adjust any collimation error of the level

  Design a curve for the highway by computing the radius

The PI is at station 250+50, the design speed is 65mi/h, and a maximum superelevation of 0.07 ft/ft is to be used. If the central angle of the curve is 38 degrees, design a curve for the highway by computing the radius and stationing of PC and PT.

  Explain the rule to solve the moment through the reactions

When using singularity functions, if I have a reactionary moment at a cantilever connection, do I use the right hand rule to solve the moment and determine it's direction through the reactions

  Determine mans velocity and acceleration at the instant

While the swing bridge is closing with a constant rotation of 0.5 rad/s, a man runs along the roadway such that when d = 10 ft he is running outward from the center at 5ft/s with an acceleration of 2 ft/s^2, both measured relative to the roadway.

  What are the main policy aspects of the clean water act

What are the major policy aspects of the Clean Water Act? What is the history and statutory basis for federal regulation of wetlands? What are the national permits? What are the origin and significance of the no net loss policy?

  Conduiting with a roughness coefficient

Given an 18-in. concrete conduit with a roughness coefficient of n = 0.013, s = 0.02, and a discharge capacity of 15 cfs, what diameter pipe is required to triple the capacity?

  How to calculate the size of the truck fleet needed

An underground limestone mine with production of 12,000 tons/day will use trucks for the main haulage between an ore pass and a hoist skip pocket. The hauling distance is 5500 ft. The main haulage drift is horizontal and is 12.5 ft wide and 12.5 f..

  What are the problems associated with bridge widening method

In bridge widening projects, the method of stitching is normally employed for connecting existing deck to the new deck. What are the problems associated with this method in terms of shrinkage of concrete

  What is smallest particle size that will be removed in grit

What is the smallest particle size (density 2.65 g/cm3) that will be removed in a horizontal grit chamber 10 m long and 1.0 m deep if the flow rate is 1000 m3/hr. Assume the temperature of the water is 25°C.

  What is the reason for the relatively high strength of wood

what is the reason for the relatively high strength of wood in the longitudinal direction of the tree trunk as compared to the transverse direction

  Which of materials listed in table are possible candidates

A cylindrical rod with a length of 380 mm and a diameter of 10 mm is to be subjected to a tensile load. The rod must not experience plastic deformation or an increase in length of more than 0.9 mm when a load of 24.5 kN is applied.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd