Determine the fraction of h at ph 6 and ph 8

Assignment Help Civil Engineering
Reference no: EM13303230

Hydrogen sulfide (H2S) is an odorous gas that can be stripped from solution by gas stripping. The efficiency of the process will strongly depend on the pH of the solution. The equilibrium reaction is: in a pocess similar to ammonia. The reaction is H2S -><- (H+) + (HS-) with equilibrium constant (K_a1) = 0.86 * 10^-7 Find the fraction of H_2*S (ie: H_2*S/(H_2*S) + (HS-) at pH 6 and pH 8

Reference no: EM13303230

Questions Cloud

Compute the temperature of the source : A certain light source is found to emit radiation whose peak value has a frequency of 1.83E+15 Hz. Calculate the temperature of the source
How many photons per second are entering the pupil : A person can just see this bulb from a distance of 800m, with the pupil diameter dialated to 7.5mm, how many photons per second are entering the pupil
Determine the frequency of the light in air : Light of wavelength 550. nm in air is found to travel at 1.96x10^8 m/s in a certain liquid. Determine the frequency of the light in air
How long was the pot in flight : When t = 0 s, a flower pot on a window sill drops from rest to the sidewalk some 32.0 m below, How long was the pot in flight
Determine the fraction of h at ph 6 and ph 8 : Hydrogen sulfide (H2S) is an odorous gas that can be stripped from solution by gas stripping. The efficiency of the process will strongly depend on the pH of the solution. The equilibrium reaction is: in a pocess similar to ammonia.
Compute the final angular speed of the merry-go-round : A disk-shaped merry-go-round of radius 2.03m and mass 185kg rotates freely with an angular speed of 0.671rev/s. What is the final angular speed of the merry-go-round
What are the population health problems : Which type of assessment aims to answer the questions of: what are the population health problems, and what resources are locally available to address those health problems?
Determine the resulting angular speed of the student : A student sits at rest on a piano stool that can rotate without friction. The moment of inertia of the student-stool system is 4.0 kg m2. What is the resulting angular speed of the student and the stool
At what angular frequency would it oscillate : A spring is compressed by 0.0527 m and is used to launch an object horizontally with a speed of 2.19 m/s. at what angular frequency (in rad/s) would it oscillate

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine how much sand did driver place in the drum

A truck driver used sand to soak up a 1 g spill of lindane (C6H6Cl6). He placed the contaminated soil in an open drum which then filled with 150 L of water during a rainstorm. You test the water and find a concentration of 17 M/L.

  Determine what is the static height reading of manometer

A manometer of water reads a height of 20cm at a temperature of 15 degrees C. If the diameter of the manometer tube is 1mm, what is the static height reading

  Determine the force required to lift the block of stone

Determine the force required to lift the block of stone that weighs 200 lb. The rollers are frictionless and the static coefficient between all other surfaces is 0.3. Neglect the size and weight of the wedges.

  Design condition inflow and pumping rates

Derive an equation that allows you to compute the diameter of the drain hole for a desired steady water height in the tank for the design condition inflow and pumping rates.

  Determine the dimensions of an ideal circular settling tank

determine the dimensions of an ideal circular settling tank that can remove 0.01-in diameter particles with a specific gravity of 1.01. Use a detention time of 1.5 hours, flowrate= 4ft^3/sec, the specific weight of water=62.4 lb/ft^3

  Bidding for the project assignment

Should Bernard bid for the project assignment? Why or why not? Does Bernard have an unfair advantage over firms having designed the project on which he wants to bid?

  How to compute the normal depth of a trapezoidal channel

A trapezoidal channel with a bottom width of 4 feet and side slopes 2:1 (H:V) and a bed slope of 1 percent conveys a discharge of 50,000 gpm. Assume n = 0.025. Compute the normal depth.

  Compute dead load due to backfill that the pipe must support

A 300 mm diameter pipe is placed in a 3 m deep rectangular trench that is 0.60 m wide. The trench is backfilled with clay that has a bulk unit weight of 18.8 kN/m3. Compute the dead load due to backfill that the pipe must support.

  What is the final temp and the final mass of air in the tank

an insulated tank is evacuated. Air from the atmosphere at 12 psia and 70 degrees farenheight is allowed to flow into the 100 cubic foot tank. What is the final temp and the final mass of air in the tank just after flow ceases.

  Describe does the sample meet the niosh standard

The National Institute for Occupational Safety and Health (NIOSH) sets standards for CCl4 in air at 12.6 mg/m^3 of air (a time average over 40 hr). The CCl4 found in a sample is 4800 ppb. Does the sample meet the NIOSH standard

  Concrete dam retaining water

A concrete dam retaining water has a specific weight of concrete of 23.5kn/m3, what is the factor of safety against sliding & overturning and pressure intensity on the base if coefficient of friction is 0.45

  Compute normal and critical depths in a concrete culvert

compute normal and critical depths in a concrete culvert(n=0.015)with a diameter of 36in.and a bed slope of 0.002ft/ft if the design discharge is 15cfs.is the slope steep or mild?reap for S= 0.02ft/ft.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd