Determine the force exerted on the tank bottom

Assignment Help Civil Engineering
Reference no: EM13303165

A cylindrical water tank is suspended vertically by its sides. The tank has a 10-ft diameter and is filled with 20 degree celcius water to a 3-ft depth. Determine the force exerted on the tank bottom

Reference no: EM13303165

Questions Cloud

Determine the error n in replacing the sine and the tangent : Determine the % error n in replacing the sine and the tangent of an angle by the value of the angle in radians for angle values 5,10,20 degrees. Explain the qualitative difference between the sine and tangent results.
Furnace maker bernhard has agreed to sell a melting furnace : 1 Furnace Maker Berhad has agreed to sell a melting furnace to Tango Sdn. Bhd. and has given an undertaking that the melting furnace would have a temperature of not lower than 1500°C. After the melting furnace has been delivered to Tango Sdn. Bhd., i..
Determine the current delivered by the battery : A 18.2 omegacap.gif resistor, 8.7 omegacap.gif resistor, and a 4.3 omegacap.gif resistor are connected in parallel to a 12 V battery. Determine the current delivered by the battery
Describe some of major themes in pentateuch : Describe some of the major themes in the Pentateuch and their function in helping to bind together the diverse materials in the Tanakh's first five books. How do the divine promises serve to provide a unifying element in the long narratives extending..
Determine the force exerted on the tank bottom : A cylindrical water tank is suspended vertically by its sides. The tank has a 10-ft diameter and is filled with 20 degree celcius water to a 3-ft depth. Determine the force exerted on the tank bottom
Determine the objects weight density : An object is recovered from under the sea. Its weight is measured to be 54.6 lb and its volume 1.3 ft3. What is the object's weight density
Determine the maximum allowable compressive force : (a) Determine the desired diameter of the disk. (b) If the rubber strain is not to exceed 0.2 in/in, determine the maximum allowable compressive force. Recall that the spring constant, k=Fx,or in terms of an axially loaded member
Advantages and disadvantages of hr outsourcing : Explain the concept of outsourcing. Which HR functions are usually outsourced and why and evaluate the advantages and disadvantages of HR outsourcing.
Determine the angular frequency of the motion : The length of a simple pendulum is 0.65 m and the mass of the particle (the "bob") at the end of the cable is 0.26 kg. What is the angular frequency of the motion

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the alkalinity in mg per l as caco3

A water treatment llant and the water treatment plant removes calcium hardness (Ca2+) by precipitating (making) CaCO3(s). If, after establishing equilibrium with CaCO3(s), the dissolved Ca2+ concentration is 10 mg/L and the pH is 10.5.

  What are the surface overflow rate

a rectangular clarifier with a length:width ratio of 3:1 receives a flow of 850m3/day. the clarifiers depth is 4.0m and the detention time of the water inthe clarifier is 2.4 hrs, what are the surface overflow rate and the horizontal flow through ..

  Estimate the peak flood tidal flow velocity at the location

As a tide enters a river and propagates upstream, the water depth at a given location is 3.7m . At this location the tide range is 1m . If the dominant tidal compeonent has a period of 12.4 hours, estimate the peak flood tidal flow velocity at thi..

  Determine what is angular error if the distance to the pole

A 6-ft range pole is set over a station on which a sight is to be made with a the odolite. If the sight is made to the center of the rod 4-ft up from the ground, and the center of the top of the pole is out of plumb 0.12 feet in a direction normal..

  What is the percent decrease in the cross-sectional area

a circular aluminum tube of L=600 mm is loaded in compression by forces P. The outside and inside diameters are d2=75 mm and d1=63mm, respectively. A strain Gage is placed on the outside of the tube to measure normal strains in the longitudinal di..

  How fast was the drunk going just before the collision

A drunk driver in a 2200kg car plows into a 2100kg parked car with its brake set. Police measurements show that the two cars skid together a distance of 28m before stopping.

  Find the shortest ladder

a wall 8 ft high is 3/3/8 ft. from a house. find the shortest ladder which will reach from the ground house when leaning to the wall.

  Determine the maximum deflection of collar b

Collar A is dropped 30 inches onto collar B, which is resting on a spring of constant k= 4 lb/in. Assuming perfectly plastic impact (coefficient of restitution e=0), determine the maximum deflection of collar B.

  Determine the height from the ground at which ball pass

Ball A is thrown vertically upward from the top of a 20-{\rm m}-high-building with an initial velocity of 3m/s . At the same instant another ball B is thrown upward from the ground with an initial velocity of 16m/s .

  Find void ratio and wet unit weight for degree of saturation

A sand sample has a porosity of 38% and specific gravity of solids of 2.66. Find the void ratio and wet unit weight in lb / ft3 if the degree of saturation is 35%.

  Calculating the ph of solution

A 1.50 L buffer solution is 0.250 M in HF and 0.250 M in NaF. Calculate the pH of the solution after the addition of 0.0500 moles of solid NaOH. Assume no volume change upon the addition of base. The Ka for HF is 3.5 x 10 -4 .

  What should the removal efficiency of a process designed

Wastewater flow of 2000 m3/day containing 120g/L of salt. Discharge into a river with a flow of 34,000 m3/day and a salt concentration of 50 mg/l. The agency wants to maintain the salt level to no greater than 250 mg/L downstream of the discharge.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd