Determine the force exerted on the rigid supports when the

Assignment Help Civil Engineering
Reference no: EM13384290

Three bars each made of different materials are connected together and placed between two walls when temperature is T1 = 12OC. Determine the force exerted on the (rigid) supports when the temperature becomes T2 = 18OC. The material properties and cross-sectional area of each bar are given.

Reference no: EM13384290

Questions Cloud

Tetrafluoroethylene c2f4 can be converted to : tetrafluoroethylene c2f4 can be converted to octafluorocyclobutane which can be used as a refrigerant or an aerosol
A 1000-ml sample of sulfuric acid from an automobile : a 10.00-ml sample of sulfuric acid from an automobile battery requires 35.08 ml of 2.12 m sodium hydroxide solution for
A close chemical relative of the banned insecticide ddt is : a close chemical relative of the banned insecticide ddt is methoxychlor c16h15cl3o2. methoxychlor is currently used as
A 0670 liter can of co2 gas at 273 k and 1 atm of pressure : at stp a gas has a volume of 90 l. what volume will it occupy at 450 k and 766 mm hg?at stp a gas has a volume of 888
Determine the force exerted on the rigid supports when the : three bars each made of different materials are connected together and placed between two walls when temperature is t1
Avogadros number is big if you had 602 x 1023 dollars and : avogadros number is big. if you had 6.02 x 1023 dollars and could spend it at 1 billion 109 per second for your entire
What mass of sucrose should be combined with 514 g of water : what mass of sucrose should be combined with 514 g of water to make a solution with an osmotic pressure of 8.85 atm at
Calculate the solubility of caoh2 in a 0469m cacl2 solution : calculate the solubility of caoh2 in a 0.469m cacl2 solution at 31degc given that the ksp of caoh2 is 4.96 x 10-6 at
The flask was then shaken until the solution was uniform a : a student placed 13.5 g of glucose rm c6h12o6 in a volumetric flask added enough water to dissolve the glucose by

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the isentropic efficiency of the compressor

An adiabatic argon unit compresses argon at 200 kPa and 27C to 2.18 MPa. If the Argon leaves this compressor at 513C. What is the isentropic efficiency of the compressor

  Calculate the detention time-hr in each clarifier

A waste water treatment plant previously used two circular clarifiers for primary settling, each 42 ft in diameter and 12 feet deep. Assume the incoming flow rate was 0.9 MGD. The maximum allowable clarifier loading rate is 600 gal/d/ft^2

  Calculate the angle a between the vectors a and c

If A cross product B = the vector C, calculate the angle "a" between the vectors A and C and between the angle "b" between the vectors B and C.

  What should be the new volume of the lake

Suppose that the distance from the lake outlet to the withdrawal cannot be more than 20 mi. What should be the new volume of the lake?

  Calculate pressure at the clay-sand interface for two cases

A clay lense of Kc=0.10cm/day is sandwiched somewhere inside a vertical soil column of height 100cm that is otherwise filled withsand of Ks=200cm/day. A depth of water d=10cm is ponded above the surface.

  Briefly describe the measures

Briefly describe the measures that should be considered for the control of corrosion of embedded steel in concrete.

  Determine max speed of the bicycle neglect rolling friction

The specific weight of aire is .075 lb/ft^3. The physiological limit of the power for this well trained cyclist is .5 hp (1hp=550 ft*lbs/s) Neglect rolling friction, find the max speed of the bicycle.

  Determine the force needed in each of the two springs

The door of an oven has 27.9lb weight that acts vertically through point D. The door is supported by a hinge at point A and two springs that are symmetrically located on each side of the door.

  Calculate weight percent austenite and weight proeutectoid

a .65% Carbon hypoeutectoid plain carbon steel is slowly cooled from 950 degrees C to just slighty above 723 degrees C calculate the weight percent austenite and weight proeutectoid ferrite in this steel

  Explain how to design for bending only using lrfd

A simply supported steel beam over a 24-ft span carries a uniformly distributed dead load of 2 k/ft, including an allowance for the self-weight, and a live load of 3.5 k/ft. The steel is A992, Grade 50.

  Estimate the radon concentration in the crawl space

The emission rate of radon into the crawl space is reported to be 0.6 pCi/m^2-s. An exhaust system was added to provide 1 air exchange per hour (ACH) in the crawl space. The outdoor concentration of radon is 1 pCi/L.

  What is the total hydraulic energy at the surface of water

The bottom of a rectangular flume is 5 m above reference level. The depth of the water in the flume is 3 m. The average velocity is 1.7 m/s. What is the total hydraulic energy at the surface of the water and at the bottom of the flume.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd