Determine the final equilibrium temperature in k

Assignment Help Civil Engineering
Reference no: EM13315436

One kilogram of air, initially at 5 bar, 350 K, and 3kg of carbon dioxide (CO2), initially at 2 bar, 450 K, are confined to opposite sides of a rigid, well-insulated contained, as illustrated. The partition is free to move and allows conduction from one gas to the other without energy storage in the partition itself. The air and carbon dioxide each behave as ideal gases. Determine the final equilibrium temperature, in K, and the final pressure, in bar, assuming constant specific heats.

Reference no: EM13315436

Questions Cloud

What is the magnitude of the induced current in the coil : The component of the external magnetic field along the central axis of a 50-turn coil of radius 5.6 cm increases from 0 T to 1.8 T in 3.6 s, what is the magnitude of the induced current in the coil
Explain the major concepts behind computers : Address the following below in at least 20 slides powerpoint or more, you must include as a minimum an introduction, body, summary/conclusion, and notes pages. It is important that you follow APA formatting guidelines and site your references ..
Calculate the weight percent of hno3 in the solution : Commercial aqueous nitric acid, HNO3, has a density of 1.42 g/mL and is 16 M. Calculate the weight percent of HNO3 in the solution.
What resistance should the wire have : The wire in a 150 W aquarium heater has a diameter of 0.12 mm and is made of iron, What resistance should the wire have while the heater is operating
Determine the final equilibrium temperature in k : The partition is free to move and allows conduction from one gas to the other without energy storage in the partition itself. The air and carbon dioxide each behave as ideal gases. Determine the final equilibrium temperature
What will be the current amplitude at this frequency : You have a 208%u2212%u03A9 resistor, a 0.400%u2212Hinductor, a 4.91%u2212%u03BCF capacitor, What will be the current amplitude at this frequency
What is the cost of heating the water : Water has a specific heat capacity of 4186 J/kg C. A tank contains 500 kg of water at 10 C. what is the cost of heating the water
Determine how many moles of hclo4 are in 1 l : The density of 70.5 wt% aqueous perchloric acid is 1.67 g/mL. a. How many grams of solution are in 1.000 L b. How many grams of HClO4 are in 1.000 L c. How many moles of HClO4 are in 1.000 L
Cost benefit analysis : Australian Standard for lighting to firstly ensure compliance with the standard and compatibility with current fixtures (T8 linear fluorescent);

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the volume of a cylinder that contains 60 lbm

Calculate the volume of a cylinder that contains 60 lbm of carbon dioxide at 230°F and 23 psig pressure. Assume atmospheric pressure to be 14.7 psia.^4

  Find specific weight and total moisture content of sample

A sample of dry sand with a specific gravity total of 16.49 kN/m3 and a relative density of 2.67 grains, is placed outdoors. During a rainy period, the sample volume remains constant but the degree of saturation increases to 40%.

  How many tons of water must be added to solids to achieve

Ten tons of a mixture of paper and other compostable materials has a moisture content of 7%. How many tons of water must be added to the solids to achieve a mixture with 50% moisture for composting

  Determine the unit strain developed in the concrete

a concrete test cylinder is loaded with p= 100k (445 kn) and resulting shortening of 0.036" (0.0914 mm). determine the unit strain developed in the concrete.

  Determine longitudinal and hoop stresses in the copper pipe

Typical water supply at a faucet in any building is conveyed in copper pipe that is ½" in inside diameter, with a wall thickness of 0.040". If the water pressure is 50 psi and the valve is closed (meaning that water is not flowing)

  Briefly explain the problem encountered in the measurement

A tensiometer is used to measure a compacted soil in the field that has a matric suction of 200 kPa under atmospheric conditions. The pore-water pressure measurement in the tensiometer reaches -99 kPa

  Find the dimensions of an acceptable box of a largest area

a delivery company accepts only rectangular boxes the sum of whose length and girth (perimeter of a cross section) are equal to 108cm. find the dimensions of an acceptable box of a largest area.

  What is the mean velocity of air in the micro-channel

A micro-channel of diameter 0.5 mm and length 750 mm is connected to a plenum. A fan produces a negative gage pressure of -1.5 inch H2O in the plenum and draws air at 20oC into the micro- channel.

  Calculating the force in a punch press

Calculate the force (in Kn) a punch press must exert if it is to punch out a large washer from a strip of 5-mm thick sheet steel with an ultimate shear strength of 400 MPa.

  What should be the minimal diameter of the above tank

For an elevated storage tank , if the minimum allowable pressure = 300 kPa, Height of pipe system at low-pressure service location = 6 m, and head loss from tank to service location: average daily conditions = 11 m

  Determine to the nearest 1 by 4 in the smallest dimension h

If A and B are both made of wood and are 3/8 in thick, determine to the nearest ¼ in the smallest dimension h of the support so that the average shear stress does not exceed \tauallow = 300 psi.

  Find the capacity of the main channel and the lateral extent

Field tests have shown that the Horton equation best describes the composite roughness of the channel. Find the capacity of the main channel and the lateral extent of the floodplains for a 100-year flow of 1590m^3/s.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd