Determine the exit temperature

Assignment Help Civil Engineering
Reference no: EM13563805

A mixture by volume of 50% hydrogen and 50% carbon dioxide is flowing isentropically through a nozzle with flow rate of 1 m^3/s measured at inlet condition of 700 kpa and 373k the inlet velocity is negligible and the mixture expands to a pressure of 150 kpa determine

a-the exit temperature

b-the exit dimeter

c-the mass flow rate

Reference no: EM13563805

Questions Cloud

Explain how mechanical strength melting temperature : Explain how mechanical strength, melting temperature , and thermal exapntion are related at the atomic level. specifically, how do they relate to each other and the bonding energy between the atoms
What is the tension force in the bolts holding the bend : When a plastics plant is redesigned, a tank exit is now facing the wrong direction and must be connected to a pipe of diameter D=0.2 m with a180o bend in a horizontal plane.
Determine the final maxture dry bulb temperature and its : One atmospheric air stream at 15 c and 30 percent relative humidity is mixednadiabatically with another air stream at 30c and 70 percent relative humidity in a steady flow process if the mass flow rate of the dry air in the hot stream
Determine the heat removed in the cooling process : Atmospheric air at 1.01 bar 30 c and 60 percent relative humidity flows over a set of cooling coils at an inlet flow rate of 1500 m^3/min the liquid which condeness is removed from the system at 17 c subsequent heating of the air results in the final..
Determine the exit temperature : A mixture by volume of 50% hydrogen and 50% carbon dioxide is flowing isentropically through a nozzle with flow rate of 1 m^3/s measured at inlet condition of 700 kpa and 373k the inlet velocity is negligible and the mixture expands to a pressure of ..
Determine the minimum temperature in the cycle : A reversed brayton cycle operates with air entering the compressor at 1 bar and 7 c and leaving at 4 bars air enters the turbine at 37 c the compressor and the turbine efficients are 84% and 88% respectivelt determine
Estimate the value of the fuel that is captured if the vapor : Gasoline vapors are vented to the atmosphere when an underground gasoline storage tank is filled. If the tanker truck discharges into the top of the tank with no vapor control
Compute and tabulate the azimuths from the following 3-sided : Compute and tabulate the azimuths from the following 3-sided traverse where course ab is due north. angles are to the right. include a sketch.
Determine the work done and the heat transfer : Water, initially dry saturated vapour at 4 bar, lls a closed rigid con- tainer. The water is heated until its temperature is 400C. Determine the work done and the heat transfer.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the flow rate of the oil

Oil of a specific gravity of 0.75 is flowing through a 6-in pipe under a pressure of 15 psi. If the total energy relative to the datumplate is 8.0 ft below the center of the pipe is 58.6 ft, determine the flow rate of the oil.

  Determine the required magnitude of force fb

If the resultant force of the two tugboats is 2.2kN , directed along the positive x axis, determine the required magnitude of force Fb. Determine the direction theta of force Fb

  How far does a horizontal plane depart from a level surface

The width of a lake is 16 km (it is a flat plane tangent to the radius of the sphere). How far does a horizontal plane depart from a level surface if the earth is a sphere with r=6371km?

  Find the probability that is drawn marble is only white

Two marbles are drawn in succession from the box containing 10 red, 30 white, 20 blue, and 15 orange marbles. replacement being made after each drawing. Find the probability that is: (a) both are white

  Determine the depth of flow and the discharge immediately

A steel railroad track (Es=200 GPA, as=11.7x10-6/oC) was laid out at a temperature of 6/oC. Determine the normal stress in the rails when the temperature reaches 48oC assuming that the rails (a) are welded to form a continuous track (b) are 10m long ..

  Construct a choice table for interest rates from 0% to 100%

A firm is considering moving its manufacturing plant from Chicago to a new location. The industrial engineering department was asked to identify the various alternatives together with the costs to relocate the plant, and the benefits.

  Conclude that the mean concentration of silica is less

Measurements of groundwater concentrations of silica (SiO2) in mg/L, were made at a sample of 12 wells in Birmingham. The sample mean concentration was 61.3 and the standard deviation was 5.2.

  The design conditions and shear strengths used for each

Explain, in some detail, the design conditions and shear strengths used for each design condition when working with clay soils?

  What pipe diameter is needed to discharge gasoline

Gasoline is being discharged from a pipe at point 2 at elevation 66.66 m. Pint 1, located 965.5 m along the pipe from point 2, is at elevation 82.65 m

  Determine the new angular speed with moment of inertia

Person spining has his arms outward. The moment of inertia is 52kg*m^2 and ang. speed 3.80 revolutions/ second. if the persons arms are down. moment of inertia goes to 35kg*m^2. find the new angular speed

  How do i solve this problem a 14 in diameter rod must be

how do i solve this problem a 14 in diameter rod must be machined on a lathe to a smaller diameter for use as a

  Compute the volume of fill that will be produced and express

The average unit weight of this soil is 118 lb/ft^3, and the average moisture content is 9.6%. It also has a maximum dry unit weight of 122 lb/ft^3 and an optimum moisture content of 11.1%

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd