Determine the exit pressure temperature and area

Assignment Help Civil Engineering
Reference no: EM131238509

A nozzle is designed assuming reversible adiabatic flow with an exit Mach number of 2.8 while flowing air with a stagnation pressure and temperature of 2 MPa and 150?C, respectively. The mass flow rate is 5 kg/s, and k may be assumed to be 1.40 and constant. Determine the exit pressure, temperature and area, and the throat area.

Reference no: EM131238509

Questions Cloud

What are most important factors leading you to your sentence : The teacher is six months pregnant and has been divorced for a number of years. What will be your sentence? What are the most important factors leading you to your sen- tence? Is it important that you make an example of her so that other similar c..
Who has the most influence on crime control policy : Summarize the key elements of the selected crime control policy. LEGALIZATION OF RECREATIONAL USE OF MARIJUANA. Who has the most influence on crime control policy? The president or The governor or Our representatives?
Find the exit velocity and area ratio ae/ai : Steam flowing at 15 m/s, 1800 kPa, 300?C, expands to 1600 kPa in a converging nozzle. Find the exit velocity and area ratio Ae/Ai.
Standard deck of playing cards : Two cards are dealt off the top of a well-shuffled, standard deck of playing cards. You have a choice:
Determine the exit pressure temperature and area : The mass flow rate is 5 kg/s, and k may be assumed to be 1.40 and constant. Determine the exit pressure, temperature and area, and the throat area.
American adult population supports candidate hope : Thirty-two percent of the American adult population supports candidate Hope. A simple random sample of 10 adults asks if they agree with the statement "I support candidateHope." What is the probability that at least 2 of those surveyed would agr..
What happens to the flow rate : To increase the flow, a reversible adiabatic compressor is added before the nozzle to increase the stagnation flow pressure to 500 kPa. What happens to the flow rate?
Randomly selected human being on earth : The probability that a randomly selected human being on Earth has green eyes is 0.02. If 55 peopleare randomly selected from the population, what is the probability that at least 1 of themhas green eyes? (Round your answer to four decimal places..
Is the corporation right : Bill, a California resident, sues Bob, also a California resident, for copyright infringement, a cause of action arising under federal law, in a Federal District Court in California. Bob argues that there is no subject matter jurisdiction. Is he ..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the moisture content and the free moisture

A sample of aggregates weighs 400 grams. After drying at 112oF, its weight was 398.5 grams and absorption is 10%. Determine the moisture content and the free moisture.

  What is the steady-state concentration of lead in urban air

The background concentration of atmospheric lead is 0.1 ug/m^3. During a typical hot day in Leadville the mixing height is 500m and the average wind speed is 1.9m/s.

  Find the point at which the line with parametric equation

An engine cooling system initially contains 16 quarts of a mixture of water and antifreeze, which is 30 % antifreeze on a volume basis. if its desire to be removed and replaced with pure (100%) antifreeze?

  Determine how long he can survive on his body fat alone

Consider a man who has 20 kg of body fat when he goes on a hunger strike. Determine how long he can survive on his body fat alone.

  Write a user defined function named simplecharacter

Write a User Defined Function named SimpleCharacter that takes the character inputs either "Coffee" or "Tea" and returns the outputs High Octane for an input of "Coffee" and Low Octane for an input of "Tea".

  Determine the maximum load p

The structure shown below is made of structural A-36 steel. The left post is a solid round steel member with a diameter of 6 inches. The right post is a square steel member which is 6 inches square. The horizontal member is a solid steel beam with..

  Calculate the distance the tank has moved when the water in

Use appropriate kinematics equations (for the right ranges) for the new velocity and distance traveled. (Hint: when the impulse becomes a non-negative number set it to zero; then the acceleration becomes zero and the velocity does not change; so use ..

  Calculate the percentage of change in total volume

A montmorillonite clay has a liquid limit of 160, a plastic limit of 75 and a shrinkage limit of 10. Calculate the percentage of change in total volume with respect to its initial volume when a specimen of this clay is completely dried from a water c..

  Calculate the difference in pressure at point a and point b

Some distance downstream, the velocity profile can be (very) roughly approximated by a region inside the wake with u = U/2 and an exterior region with u = 3U/2.

  Calculate the flow rate of toluene into theblender

Calculate the flow rate of toluene into theblender (L/min) and the composition of the tankcontents (wt% benzene).

  Find the work done by the air and heat transfer

A cylinder/piston contains 100 L air at 110 kPa, 25?C. The air is compressed in a reversible polytropic process to a final state of 800 kPa, 500 K. Assume the heat transfer is with the ambient at 25?C and determine the polytropic exponent n and th..

  Assume statistical independence between the concentration

The daily concentration in the air for a given city is normally distributed with a mean of 0.03ppm and c.o.v. of 40%. Assume statistical independence between the concentration for any two days. Suppose the criteria for clean air standard require that..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd