Determine the exit area of the nozzle

Assignment Help Civil Engineering
Reference no: EM131238449

1. Helium flows at 75 psia, 900 R, 330 ft/s into a convergent-divergent nozzle. Find the throat pressure and temperature for reversible flow and M = 1 at the throat.

2. The products of combustion enter a nozzle of a jet engine at a total pressure of 18 lbf/in.2 and a total temperature of 1200 F. The atmospheric pressure is 6.75 lbf/in.2. The nozzle is convergent, and the mass flow rate is 50 lbm/s. Assume the flow is air and adiabatic. Determine the exit area of the nozzle.

Reference no: EM131238449

Questions Cloud

Calculate capuanos net income as a percent of sales : Compute for each year the receivable turnover ratio. At the end of 2012, accounts receivable was $560,900 - Calculate Capuano's net income as a percent of sales.
Determine the initial mass flow rate out of the tank : Find the mass of air in the tank and the mass flow rate out of the tank when the nozzle flow becomes subsonic.
Bond price in dollars and percentage terms : The firm has recently become more financially stable and the rating agency is upgrading the bonds to BBB. The new appropriate discount rate will be 7.1 percent. What will be the change in the bond's price in dollars and percentage terms?
Why do i have to do earned value management : Many project managers ask the question "Why do I have to do earned value management?". Kuehn (2007) states that the reason why is that it works... if it is done well. After reading the chapter and Kuehn's paper, what do you think are the biggest h..
Determine the exit area of the nozzle : Helium flows at 75 psia, 900 R, 330 ft/s into a convergent-divergent nozzle. Find the throat pressure and temperature for reversible flow and M = 1 at the throat.
Difference in the obligation of one with a long position : What is the major difference in the obligation of one with a long position in a futures (or forward) contract in comparison to an options contract? Do they have any risk for the investors?
What type of approach does ppd-20 recommend : To what extent does PPD-20 address the concept of offense vs defense? What type of approach does PPD-20 recommend? Why? Do you believe that PPD-20 accurately reflects the dynamics and issues involving cybersecurity? Explain.
Manipulate currency rates : Free-floating currency can have positive and negative outcomes on multinationals and other stakeholders. Should global decision makers be able to manipulate currency rates? If yes, when is it appropriate to do so and what global criteria should be..
Determine the pressure and temperature leaving the diffuser : Consider the diffuser of the engine, where air leaves with a velocity of 300 ft/s. Determine the pressure and temperature leaving the diffuser and the ratio of inlet to exit area of the diffuser, assuming the flow to be reversible and adiabatic.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Express the approximate alkalinity of the water

A water sample has bucarbonate concentration of 220 mg/l ( HCO3- )and the PH of the water is 7.9 > Express the approximate alkalinity of this water as mg/l of CaCO3

  How many 1-inch diameter steel bolts are required to hold

The two cylinder containers are joined by bolting their flanges together. How many 1-inch diameter steel bolts are required to hold the cylinders together when the assembly is subjected to an internal pressure of 200 psi

  How much extra water does concrete can displace

How much extra water does a 21.5 ft, 175-lb concrete can one displace compared to an ultra-lightweight 38-lb Kevlar canoe of the same size carrying the same load

  Design a hollow steel shaft with an inside diameter

Design a hollow steel shaft with an inside diameter 1/3 that of the outside diameter. The shaft transmits 200 kW at a speed of 20 Hz. The allowable shearing stress is 55 MPa, and the allowable angle of twist is 1 degree per meter of length.

  State 5 reasons why adding things to a project charter late

State 5 reasons why adding things to a project charter late in the project execution could be a detriment to the project's objectives

  Estimate the power needed to overcome the aerodynamic drag

Estimate the power needed to overcome the aerodynamic drag of a person who runs at a rate of 100 yds in 10 s in still air. repeat the calculations if the race is run into a 20-mph headwind: a 20-mph tail wind.

  Determine the overall specific weight of each of the samples

Two soil samples, each having a void ratio of 0.76 and density of 2.65 grains have degrees of saturation, respectively, 85% and 100%. Determine the overall specific weight of each of the samples.

  Structure project design in civil engineering

Land is extremely valuable in this area therefore to win this job you need to consider innovative approach to reduce the waste areas

  Calculate the mass fractions of the phase present at 700 c

A 50 mg-50 Pb alloy is cooled slowly from 700 C to room temperature, a) Calculate the mass fractions of the phase present at 700 C

  What must the hydraulic detention time be in aeration pond

A perfectly mixed aeration pond with no recycle (return line) serves as the biological reactor for a small community. The pond receives 30 cubic meters/day of influent with a BOD5 of 350 mg/L that must be reduced to 20 mg/L before discharge.

  Is pelton wheel the appropriate turbine type for application

A Pelton wheel located at an elevation of 200.0 m is sued to extract power from a reservoir at an elevation of 800.0 m. A penstock 1500 m long and 0.8 m in diameter connects the reservoir and nozzle of the Pelton wheel.

  What diameter of vertical tube would allow mayonnaise

What diameter of vertical tube would allow mayonnaise ( p = 1200 kg/m3) to flow under its own weight

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd