Determine the distance the orbiter travels from the time t

Assignment Help Civil Engineering
Reference no: EM13306452

A 230,000-lb space shuttle orbiter touches down at about 220 miles per hour (mph). At 200 mph, its drag parachute is deploys. The wheel brakes are applied at 100 mph until wheel sotp and the drag parachute is jettisoned from the orbiter at 35 mph. The deceleartion during the time the parachute is deployed is a function of velocity v and is given by -0.0003v^2 in ft/s^2 and the wheel brakes cause a constant deceleration of 5 ft/s^2. Determine the distance the orbiter travels from the time the parachute is deployed at 200 mph to wheel stop.

Reference no: EM13306452

Questions Cloud

Write an equation on the line containing the given point : Write an equation on the line containing the given point and parallel given line. Express answer in the form y=mx+b (3,7) x+6y=5
Find length of 10 equal-sized aeration basins for treatment : Calculate the length of 10 equal-sized aeration basins for secondary treatment of a wastewater flow of 10 MGD with 20,000 lb of BOD per day for a conventional activated sludge process with a maximum loading of 40 lb BOD/ 1000 ft3*d.
Calculate cc and use the aisc equations e2-1 and e2-2 : If design is needed, use a W-built-up cross section; select the W section and the thickness of the plate. Calculate Cc and use the AISC equations E2-1 and E2-2 to determine the allowable stress for each axis and ultimately the allowable load for t..
System principles and prohibited personnel practices : Discuss how one can recognize the merit system principles and prohibited personnel practices.
Determine the distance the orbiter travels from the time t : A 230,000-lb space shuttle orbiter touches down at about 220 miles per hour (mph). At 200 mph, its drag parachute is deploys. The wheel brakes are applied at 100 mph until wheel sotp and the drag parachute is jettisoned from the orbiter at 35 mph.
Find how many ml of water will it take to get 10 pounds : How many mL of water will it take to get 10 pounds of dry aggregate to a moisture content of 5%. 1 kg=2.2 pounds
Benefits of an supermarket self service checkout system : Use and benefits of an Supermarket Self Service Checkout System
What is the value of the torque applied : A wheel has a rotational moment of inertia I=150. It is accelerated by a constant torque from rest to a final angular velocity of 1.0. what is the value of the torque applied
Calculate bending stress distribution which present at base : Assume the beam is 2" x 10" in cross section. Calculate the bending stress distribution that is present at the base of the cantilever and at every 2.5 ft increment toward the free end of the beam

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the maximum bending stress

a round steel rod, 25 mm in diameter, subjected to a bending moment of 160 Nxm. calculate the maximum bending stress.

  How far will the column of mercury in the tube be depressed

An open clean glass tube, having a diameter of 3 mm is inserted vertically into a dish of mercury at 20c .How far will the column of mercury (S.G =13.6) in the tube be depressed in (mm) given the following information. Theta = 130 and surface tens..

  Determine the deflection of a simple uniformly loaded

Determine the deflection of a simple uniformly loaded beam by the Ritz method,using first one term, then two terms, adn finally three terms in a sine series. Why does the coefficient of sin2piex/L vanish?

  What will be the new level of service

If an additional 11-ft lane is added (each direction) and all other factors stay the same, what will be the new level of service?

  How does the combination work for band pass or band stop

A low pass filter has a cut-off frequency of 5 kHz and a high pass filter has a cut-off frequency of 8 kHz. These two circuits are connected back to back in cascade to form an input-output system

  What will be discharge delivered from the upper reservoir

A reservoir at elevation 700 ft will supply a second reservoir at elevation 460 ft. The reservoirs are connected by 1300 ft of 24-in cast-iron pipe and 2000 ft of 20-in cast iron pipe in series. What will be the discharge delivered from the upper ..

  Find the depth and change in water surface elevation caused

Water is flowing at a depth of 10 ft with a velocity of 10 ft/s in a channel of rectangular section. Find the depth and change in water surface elevation caused by a smooth upward step in the channel bottom of 1 ft.

  Write a balanced net equation for the reaction

Write a balanced net equation for the reaction of the hydrogen ascorbate anion with water where hydrogen ascorbate acts as an acid.

  Estimate the mean and standard deviation of time

The probability density function, f(t), of the time in hours between storms during the summer in Miami is estimated as f(t) = .014e^(-.014t) if x > 0, f(t) = 0  if x is less than or equal to 0 where t is the time interval between storms in hours.

  Design a logic circuit

Design a logic circuit that, when enabled with an active-high signal named en, will detect four different ranges of values for a 5-bit input number.

  Generate a table showing in the first column the mass values

Write a MATLAB code that calculates the weight (forces due to gravity) in lbf on each planet of our solar system and earth's moon for probes/rovers which have a mass between 100 lbm and 300 lbm. Use increments of 20 lbm.

  How to determine the force that must be applied at a

The uniform load has a mass of 450 and is lifted using a uniform 35- strongback beam and four ropes. Determine the Tension in the ropes Determine the force that must be applied at A.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd