Determine the discharge in the channel in m

Assignment Help Civil Engineering
Reference no: EM13546702

A very long rectangular channel connects two reservoirs and has a longitudinal slope of 0.005. The channel has a width of 10 m and a Manning’s n of 0.030. If the upstream reservoir water surface is 3.50 m above the channel inlet invert and the downstream reservoir is 2.50 m above the outlet invert, determine the discharge in the channel in m3/s. Neglect local head losses.

Reference no: EM13546702

Questions Cloud

How might your numerical answers for both c and d vary : Assuming you had the necessary inputs to get a numerical value for both C and D, how might your numerical answers for both C and D vary if the polymer tensile member is located in Michigan versus Texas? Why?
The function of turn buckle in designing saloon and steel : In the first couple steps you are using the sine function to derive that the interior triange BCG is a right triangle. However, the sine function, by definition, is opposite divided by hypotenuse. You used sine as opposite dividede by adjacent which ..
How much revenue will stelle recognize : The company spent an accumulated total of €6 million. How much revenue will Stelle recognize in Year 3 - How much revenue will Stelle recognize in Year 2?
You must design to treat a steady water flow rate of : Where Ce (mg/L) is the equilibrium concentration of the species in water and qe(mg/g) is the mass of sorbed carbofuran per mass of activated carbon. The carbofuran concentration in untreated water is 0.9 mg/L. The drinking water standard is 0.04 mg/L..
Determine the discharge in the channel in m : A very long rectangular channel connects two reservoirs and has a longitudinal slope of 0.005. The channel has a width of 10 m and a Manning’s n of 0.030.
Prepare the balance sheet of the real estate business : Prepare the balance sheet of the real estate business of Andrea Scarlett, Realtor, at September 30, 2012 - identify the personal items that would not be reported on the business records.
List the inputs necessary to determine the stress in the : Assuming you had the necessary inputs to get a numerical value for both c and d, how might your numerical answers for both c and d vary if the polymer tensile member is located in MI versus TX? Why?
How the equation for splitting tensile strength of a concret : Need to know how the equation for splitting tensile strength of a concrete cylinder f(ct) = 2P/pi*D*L is derived using mechanics of materials or linear elasticity approach.
What is the optimal number of orders per year : What is the average inventory if the EOQ is used, what is the optimal number of orders per year

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine applied load at the free end with a max deflection

Given an aluminum simply supported beam with overhang, determine the applied load at the free end with a max deflection of 1". b= 1" h= 0.25" L=12" l= 24" E= 10,000 ksi

  What is the tensile stress at which yielding occurs

A single metallic crystal is oriented such that the normal to the slip plane and the slip directions are at angles of 50 and 40 degrees respectively, with the tensile axis

  What is overall product water recovery and salt rejection

Each stage can perform 60 % water recovery (Qp/Cf) and 90% salt rejection (1-Cp/Cf) A) What is the overall product water recovery and salt rejection b)what is final product water flow rate (m^3/day) and quality in terms of TDS (mg/L).

  Which alternative is inferior in the ford costs for two year

investing in the General Motors costs $10,000 today and pays back $11,500 two years from now. If investing in the Ford costs $8,000 today and pays back $4,500 each year for two years, which alternative is inferior

  Determine how many tons of aggregate will be needed

Base course aggregate has a target dry density of 119.7 lb/cu ft in place. It will be laid down and compacted in a rectangular street repair area of 2000 ft*48ft*6in.

  Determine what size motor-horsepower is required for mixer

A chemical mixing basin is to be designed to blend chlorine and treated wastewater. The basin flow is 700 gallons per minute and the basin dimensions are 5 feet by 5 feet by 5 feet water depth.

  Force required to hold the pipe

A 0.3-m diameter pipeline terminates in a nozzle of outlet diameter = 0.15 m. When water flows through this pipe at a rate of 0.25 m3/s, the force required to hold the pipe (N) is most nearly.

  Determine how many kilograms of sulfur would be emitted

coal has about 2% sulfur. How many kilograms of sulfur would be emitted from coal fired plints in the US in 1 yr US electricity production is about 0.28 * 10^12 watts, & coal has an energy content of about 30*10^6 J/kg

  What rate of return would it have to make on the basis of si

Farah Manufacturing wants it's investments to double in value in 4 years, what rate of return would it have to make on the basis of (a) simple interest (b) compound interest

  Determine the distance the ball is from the origin 4s

A 7 lb particle at rest is subjected to the action of its weight and forces F1= (2i+6j-2tk)lb, F2=(t^2i -4tj-1k) lb, and F3 =(-2ti) lb, where t is in seconds. the particle starts at the origin (0,0,0)

  Find the conductive heat loss through the furnace wall

Assuming unit surface area, find the conductive heat loss through the furnace wall and the temperature at the interface of the fire clay and red brick.

  What force-acting on the top edge to hold the gate shut

A 6ft wide, 10ft high vertical rectangular gate has its top edge 6ft below the water level. it is hinged along its lower edge. what force, acting on the top edge, is necessary to hold the gate shut

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd