Determine the design of the cut

Assignment Help Other Engineering

Reference no: EM13521774

Question

Undertake a tunnel blast design for the following conditions:

• Tunnel is 5.5m wide by 5.5.m high
• Rock is a granite with a UCS of 300 MPa
• Drill hole diameter is 51 mm, hole length is 4m
• The cut is to contain 2 relief holes of 75mm diameter
• Dry conditions are anticipated, ANFO to be used with a density of 800 kg/m3 and a powder factor of 0.6 kg/m3
• Nonel detonators are to be used

Students are to determine:

1. The design of the cut, including burden and spacing for each element of the cut.
2. Burden and spacing of the easer, perimeter and lifer holes
3. Stemming length required
4. Method of hole priming
5. Firing sequence timings for the holes
6. Explosive utilisation

Results should be presented in a report format, including diagram s as required and details of calculations undertaken.

Reference no: EM13521774

Questions Cloud

Obtain the velocity of the bullet : A bullet of mass 0.01 kg moving horizontally strikes a block of wood of mass 1.5 kg which is suspended as a pendulum. What was the velocity of the bullet just before it struck the wooden block

Define an equation for the equilibrium reaction : Your friend brings you a 1.50 M sample of HONH3Cl and wants yo know the pH. You politely ask for the Ka of the acid and she responds that she only knows that the Kb for HONH2 = 3.0 x 10^-6

Define the sedimentation coefficient of a certain dna : The sedimentation coefficient of a certain DNA in 1M NaCl at 20C was measured by boundary sedimentation at 24,630 rpm. The following data were recorded:

Explain the concentrations in anode and cathode half cells : Draw a concentration cell for 0.10 M Cu2+ and 2.0 M Cu2+ cell, show the following on each compartment clearly. (a) All the component of each cell, including the concentrations in anode and cathode half cells.

Determine the design of the cut : Determine the design of the cut, including burden and spacing for each element of the cut - burden and spacing of the easer, perimeter and lifer holes

State the amino acid sequence in the n terminal : Given the DNA template strand 3'GCATTCAAG5' write the amino acid sequence in the N terminal to the C terminal direction. Use the three letter amino acid abbreviations.

Determine the intensity of the starlight at the earth : Consider a bright star in our night sky. Assume that its power output is 3.20 1028 W, about 80 times that of the Sun, and that its distance is 21.0 ly. Find the intensity of the starlight at the Earth

Explain the species that react with zn : For groups (a) and (b) below, identify the best oxidizing and the best reducing agent in each group. You should have one oxidizing and one reducing agent (species) for a, and one of each for b. Assume the reaction as written

Calculate the area of the two-dimensional shape : Implement a Shape hierarchy where Each TwoDimensional Shape should contain the method getArea to calculate the area of the two-dimensional shape.

User Account

All Pages