Determine the depth after the jump with a mild slope

Assignment Help Civil Engineering
Reference no: EM13318297

A hydraulic jump is observed to occur in a channel with a mild slope at a flow rate of 20cfs/ft. If the depth before the jump is 1 ft, determine the depth after the jump.

Reference no: EM13318297

Questions Cloud

Decided to develop a pediatric sport medicine program : An orthopedic group practice has decided to develop a pediatric sport medicine program. Describe at least three potential markets for this new service.
What is the intrinsic value of the call option : What is the intrinsic value of the call option and what is the intrinsic value of the put option - Calculate the price of a call option expiring in two periods with an exercise price of $45.
What must be the ratio of their diamerters : A certain hydrolic system is designed to exert a force 108 times as large as the one put onto it.  What must be the ratio of their diamerters
Explain how many kilojoules of heat are absorbed : How many kilojoules of heat are absorbed when 40.6 of mgo is decomposed into mg and O2 at constant pressure
Determine the depth after the jump with a mild slope : A hydraulic jump is observed to occur in a channel with a mild slope at a flow rate of 20cfs/ft. If the depth before the jump is 1 ft, determine the depth after the jump.
Find the speed of the stream of air flowing through the leak : An airplane is cruising at an altitude of 10 km. Model the air as an ideal fluid to find the speed of the stream of air flowing through the leak
What is the draft h of the barge when floating in seawater : a barge has the trapezoid chape. It is 22 m long into paper. If the total weight of barge and cargo is 350 tons, what is the draft "h" of the barge when floating in seawater
Compute the heat input kw required to heat : Chlorine gas is to be heated from 100oC and 1 atm to 200oC a. Calculate the heat input (kW) required to heat a stream of the gas flowing at 5 kmol/s at constant pressure
How much gauge air pressure in the tank : Water is forced out of a fire extinguisher by air pressure, as shown in Figure P9.64 where h = 0.495 m. How much gauge air pressure in the tank

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the horizontal force between the tires and the ground

A 5000 lb truck is being used to lift a 1000 lb boulder B that is on a 200lb pallet A. Knowing the acceleration of the truck is 1ft/s^2, determine a) the horizontal force between the tires and the ground,

  How many trips would one rubber-tired herrywampus have

How many trips would one rubber-tired Herrywampus have to make to backfill a space with a geometrical volume of 5400 cubic yard. The maximum capacity of the machine is 30 cubic yard (heaped), or 40 tons.

  Determine the alkalinity and ph of the mixture

Assuming that carbonate species dominate the acid/base behavior of boh solutions and that no gas transfer occurs when they are mixed, determine the alkalinity and pH of the mixture.

  Explain what if the spheres are one inch in diameter

What is the porosity of a sphere of 1 ft diameter packed inside a cube of 1 ft on each edge. What if the spheres are six inches in diameter. What if the spheres are one inch in diameter.

  Calculate the total friction force exerted by the road

A 3220-lb car enters an S-curve at A with a speed of 60 mi/hr with brakes applied to reduce the speed to 45 mi/hr at a uniform rate in a distance of 300 ft measured along the curve from A to B.

  Calculate temp increase which would induce max compression

Calculate the temperature increase which would induce maximum compression in the wall of the vessel equal to the maximum tension. young's modulus for steel can be taken as 200Gpa and the coefficient of thermal expansion as 12*10^-6mm(mm Celsius).

  How far back from the front axle would the center of gravity

how far back from the front axle would the center of gravity have to be to ensure that the maximum tractive effort developed for front and rear- wheel drive options is equal

  What is the maximum acceleration that the car can achieve

A car is traveling at 30 mph on a good, dry pavement at sea level. The front-wheel-drive car has a drag coefficient of 0.35, a frontal area of 30 ft2 and a weight of 2500 lbs. The wheelbase is 120 inches and the center of gravity is 20 inches from..

  How to determine free-flow travel time on the route

Route 1 has a free flow travel time of 4 mintutes and travel time increases by 3 minutes and for each additonal 1000 vehicle in flow, and route 2 has a free flow travel time of "b" minutes and travel time increases

  Find the piles design capacity if the factor of safety is 2

A 12-in. square concrete pile is driven into clay to a depth of 40 feet. Unit weight is 115 pcf, and qu is 2000 ksf. Find the pile's design capacity if the factor of safety is 2.

  Compose a list here of the geological terms

Was the dam itself of sound design and a product of quality construction?

  Determine what must the pipe diameter be

If a flow of 5.0 cfs is to be carried by an 11000 ft cast-iron pipeline without exceeding a head loss of 137 ft, what must the pipe diameter be

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd