Determine the components of the reactions at a and g

Assignment Help Civil Engineering
Reference no: EM13300403

Two 9-in.-diameter pipes (pipe 1 and pipe 2) are supported every 7.5 ft by a small frame like that shown. Knowing that the combined weight of each pipe and its content is 30 lb/ft and assuming frictionless surfaces, determine the components of the reactions at A and G.

Reference no: EM13300403

Questions Cloud

Hexadecimal value of al after these instructions execute : What will be the hexadecimal value of AL after these instructions execute? What will be the hexadecimal value of AL after these instructions execute?
Determine perpetual equivalent annual worth at interest rate : The cash flow associated with landscaping and maintaining a certain monument in Washington, D.C., is $100,000 now and $50,000 every 5 years forever. Determine its perpetual equivalent annual worth (in years 1 through infinity)
Explain lactic acid to form a buffer solution : How many grams of sodium lactate ( or ) should be added to 1.00 of 0.140 lactic acid ( or ) to form a buffer solution with = 4.10? Assume that no volume change occurs when the sodium lactate is added.
Evaluate the cost incurred by talbot partners compared : Talbot Parners is planning to process improvement initiative aimed at reducing scheduling conflicts. What would be the savings if rescheduling could be reduced by 50 percent? Assume that the only variable cost in travel services is the wages paid ..
Determine the components of the reactions at a and g : Two 9-in.-diameter pipes (pipe 1 and pipe 2) are supported every 7.5 ft by a small frame like that shown. Knowing that the combined weight of each pipe and its content is 30 lb/ft and assuming frictionless surfaces
How much money will she need to withdraw : How much money will she need to withdraw each year starting at age 65 to have the same purchasing power as today?
Find apparent settling velocity for the phosphorus in lake : The only losses of total phosphorus for the lake are settling and fluching throught the lake's outlet. Assume the outflow rate is 212 km^2/year and the sediment area is 10,500 km^2.
What is the horizonn value at 2012 : Current and projected free cash flows for Radell global operations are shown below. growth is expected to be constant after 2012, and the weighted average cost of capital is 11% what is the horizonn (continuing) value at 2012?
How is a ziggurat similar to and different from a pyramid : How is a ziggurat similar to and different from a pyramid? Address in detail how the two differ structurally, culturally, and functionally use specific factual details.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Explain why the compressive strength of wood loaded

EXPLAIN BRIEFLY WHY THE COMPRESSIVE STRENGTH OF WOOD LOADED "PARALLEL" TO ITS GRAIN IS HIGHER THAN THE COMPRESSIVE STREGTH OF THE SAME WOOD LOADED "PERPENDICULAR" TO THE GRAIN

  Determine the required pumping rate

Four pumps are to be used in 0.5-m diameter wells at the four corners of the site. Determine the required pumping rate. The aquifer has T = 1600 m^2/day and the wells each have a radius of influence of 600 m.

  Falling-head permeability test

A falling-head permeability test was carried out on a clay soil of diameter 100 mm and length 150 mm. In 4 minutes the head in the standpipe of diameter 5mm dropped from 680 to 350 mm.

  Moles of gas in the gas sample

A gas occupise 250 ml and it's pressure is 550mm Hg @ 254C how many moles of gas are in this sample? (convert mm Hg to atm).

  What is the minimum distance from the stalled car

What is the minimum distance from the stalled car at which the driver could apply the brakes and still stop before hitting it? Assume coefficient of rolling resistance of 0.013.

  Describe what is the maximum acceptable internal pressure

of 2640 psi with a factor of safety of 2.0 with respect to yielding. the yield stress of the steel is 65,000 psi in tension and 32,000 psi in shear. the diameter of the tank is 7.0 in. the minimum required wall thickness is 0.289 in.

  Determining tension in cables using crane hook

The casting has a mass of 3 Mg. Suspended in a vertical position and initially at rest, it is given an upward speed of V mm/s in 0.3s using a crane hook H. Determine the tension in cables AC and AB during this time interval if the acceleration is ..

  Calculate the ozone column amount in du

Calculate the ozone column amount in DU, corresponding to the pressure profile and ozone concentrations given above. Recall Avogadro's number, NA = 6.0 × 1023 molecules per mole, from which one can calculate [O3]= ..

  Determine by what percentage the space mean speed

If the Greenshields model describes the relationship between speed and density on the highway, the jam density of the highway is 112 veh/mi, and the mean free speed is 64.5 mph,

  Determine the flow rate of the oil

Oil of a specific gravity of 0.75 is flowing through a 6-in pipe under a pressure of 15 psi. If the total energy relative to the datumplate is 8.0 ft below the center of the pipe is 58.6 ft, determine the flow rate of the oil.

  Determine the minimum clearance required

A vertical curve is formed when a rural highway passes under a bridge joining a -8% grade to the horizontal grade satisfying the requirement for safe speed of 90 Km/hr . Determine the minimum clearance required betewen the highway pavement surface..

  Determine the dead load per unit of length on a beam

A floor system consists of wide flange steel beams (W18 x 60) equally spaced at 8ft center to center. A 6inch reinforced concrete slab spans between beams. The bottom of the slab is coated with plaster and the top of the slab has ¾inch hardwood fl..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd