Determine the cohesion and the angle of friction of the soil

Assignment Help Civil Engineering
Reference no: EM13313537

Undrained Shear box tests were carried out on a series of soil specimens with the following results:

Total Normal Stress (kPa) Total shear stress at failure (kPa)
1 100 98
2 200 139
3 300 180
4 400 222

Determine the cohesion and the angle of friction of the soil on the basis of total stresses.

Reference no: EM13313537

Questions Cloud

Determine the increment of vertical stress at all points : Constructing the foundation causes changes in the levels of vertical stress at all points in the soil. One such point lies at the centre of the footing plan and is at a depth of 10m. Determine the increment of vertical stress there.
Explain the ionizable h atoms are associated : Given that the ionizable H atoms are associated with carboxyl groups, draw a plausible structure for maleic acid.
What is the net upward force on an airplane : What is the net upward force on an airplane wing of area 20.0 m2 if the speed of air flow is 221 m/s across the top of the wing and 206 m/s across the bottom
Explain what is the approximate percent of complexed iron : What is the approximate percent of complexed iron in a 0.1 M Fe3+ solution containing 1 M KSCN? Kf FeSCN2+ = 1.2*10^2
Determine the cohesion and the angle of friction of the soil : Undrained Shear box tests were carried out on a series of soil specimens with the following results Total Normal Stress (kPa) Total shear stress at failure (kPa) Determine the cohesion and the angle of friction of the soil
Calculate the rms speed of a rubidium atom : In 1995 a research group led by Eric Cornell and Carl Wiemann at the University of Colorado successfully cooled Rubidium atoms to the 20-200 nK temperature range
Explain values of ksp and kf for copper (ii) hydroxide : Use values of Ksp and Kf for copper (II) hydroxide and its complex to predict if a precipitate should form in a 0.1 M Cu2+ solution that is 3 M OH-. Ksp Cu(OH)2 = 1.3*10^-20 and Kf Cu(OH)42- = 1.3*10^16
How to formulate the mathematical model for the problem : The total number of effective exposures per unit of advertising medium depends on the region reached. In Louisiana, the number of effective exposures is 70,000, 100,000 and 75,000 for television, radio and direct mail, respectively.
How much kinetic energy was lost in the collision : A 5.25\; kg block starts at the top of a 12.1\; m long incline that has an angle of 10\deg to the horizontal. How much Kinetic Energy was lost in the collision

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the excess rainfall and runoff volume in inches

Suppose a watershed in Athens, Georgia has 25 acres pasture (CN=70) and 50 acres wooded (CN=55). Determine the excess rainfall (in inches) and runoff volume (cubic feet) assuming the design rainfall is 25-year, 24-hour.

  Determine what is the static height reading of manometer

A manometer of water reads a height of 20cm at a temperature of 15 degrees C. If the diameter of the manometer tube is 1mm, what is the static height reading

  Disposal of excavated material

Discuss and use examples to explain the specific factors that you will need to consider when pricing the following items in the bill of quantities foundation excavation

  Determine the critical load of a round wooden dowel

Determine the critical load of a round wooden dowel that is 0.9m long and has a diameter of (a) 10mm (b) 15mm. Use E=12GPa

  Estimate travel time for water to flow between piezometers

The piezometers are 280 m apart. The difference in piezometric head bewteen the two is 1.4 m. The aquifer hydraulic conductivity is 50 m/d and the porosity is 20%.

  Dimensions of symmetrical trapezoid plate

The plate is submerged in a liquid is a vertical position with the parallel sides horizontal and the shorter parallel side at the top and exactly in the surface of the liquid.

  How to show the oscillation of each of the systems

mechanical oscillations can be described in general by the following function: y(t)= e^(-t/m) *sin(wt+phi). where (t) is time and (w) is the oscillation angular frequency in radians per unit time.

  Temporary change on the highway

Determine the minimum distance from the diversion that a road sign should be located informing drivers of the temporary change on the highway. The letter height on the road sign is 5 inches.

  Determine the mass flow raw through the nozzle

Air enters an adiabatic nozzle steadily at 300 kPa, 200?C, and 30 m/s and leaves at 100 kPa and 180 m/s. The inlet area of the nozzle is 80 cm2. Determine (a) the mass flow raw through the nozzle, (b) the exit temperature of the air, and (c) the e..

  Determine from first principles

At a section in a beam the tensile stress due to bending is 70 N/mm2 and there is a shear stress of 25 N/mm2. Determine from first principles, the magnitude and direction of the principal stresses

  Determining transformed moment of inertia

Determine the transformed moment of inertia for the beam using steel as the reference material. Express your answer in in^4 to the nearest 0.1 in^4.

  What rate of return would it have to make on the basis of si

Farah Manufacturing wants it's investments to double in value in 4 years, what rate of return would it have to make on the basis of (a) simple interest (b) compound interest

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd