Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A hydraulic transition 100 ft long is used to connect two rectangular channels, 12ft and 6ft wide. The design discharge is 500 cfs, mannining coefficient=.013 and the slopes of the channels are both .0009. Determine the change in the bottom elevation and the water surface if the energy loss is 1.5ft.
North City must choose between two new snow-removal machines. The SuperBlower has a $70,000 first cost, a 20 year life, and an $8000 salvage value. At the end of 9 years , it will need a major overhaul costing $19,000.
A block of 250mm length and 50x40mm cross section is tosupport a centric compressive load P. The material to be usedis a bronze for which E = 95GPa. knowing that the normal stress must notexceed 80 MPa and that the decrease in length of the block sho..
The company will use an annual interest rate of 10%. Annual maintenance and pumping costs may be considered to be paid in their entireties at the end of the years in which their costs are incurred.
A sag vertical curve connects a -1.5%grade and a +1.5% grade on a freight and intercity main linerailway track. If the grades intersect at station (300+25.35)and an elevation of 350.50ft,
If the free surface at a distance from the axis of the vortex, which is sufficient for its effect to be negligible, is 180 mm above datum, what will be the height above datum of a point B on the free surface at a radius of 100 mm
The particle-size characteristics of a soil are given in this table. Draw the particle-size distribution curve. X-axis is Particle Size and Y-axis is Percent Finer Particle Size (mm): 0.425, 0.033, 0.018, 0.01, 0.0062, 0.0035, 0.0018, 0.001.
A car is traveling along a road at a uniform velocity when at time zero the driver recognizes a hazard. At a moment 0.8 seconds later the driver brakes her vehicle , resulting in her vehicle sliding 90 ft in the same direction
A simply supported steel 'I beam' is made of three 1"*8" plates with a mass of 898.4 lbmass each as shown in I beam form. Steel has a modulus of elasticity of 30*10^6 psi. The beam is allowed to deflect 1.05 inch.
Determine how many years from now the consumption will reach its design capacity with current usage rates if the community has a declining growth rate.
A trapezoidal channel having bottom width of 8 m and side slopes of 1 : 1, carries a discharge of 80 m^3/s. Find the conjugate depth to an initial flow depth of 0.75 m before the jump.
Two kilograms of steam at 300kPa and a quality of 75% are heated in a closed container until a pressure of 600kPA is reached. Determine the final temperature of the steam and the heat input. Find the pressure at which saturated water vapor is obtaine..
Suppose that a water treatment plant has a Parshall Flume with a 4 ft wide throat. a) If the upstream depth of the water (ha) is 1 ft and the depth of the water in the throat section (hb) is 0.65 ft, what is the flow rate in gpm
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd