Determine the bod

Assignment Help Civil Engineering
Reference no: EM13210657

A Biodegradable industrial wastewater (paper production) has a COD of 600 mg/L. If the BOD progression follows first-order kinetics with a rate constant = 0.10 per day, determine the BOD.

Reference no: EM13210657

Questions Cloud

What is the distiniction b/n point and non point sources : what is the distiniction b/n point and non point sources of water pollution and thier varation with surface and ground water?
"describing two approaches-indicators to measuring patient : "Describing two approaches or indicators to measuring patient outcomes. Measuring the quality of care is essential to being able to identify which areas of patient care need improvement.
Calculate the npv according to the divisional manager : Calculate the NPV according to the divisional manager and the NPV incorporating inflation levels to support your comments. In both cases, assume the total investment in working capital will be recovered at the end of the project.
Determine the required value for m : A 1 meter diameter cylindrical mass, M, is connected to a 2 meter wide rectangular gate. The gate is to open when the water level, h, drops below 2.5 meters. Determine the required value for M. Neglect friction at the gate hinge and pulley.
Determine the bod : A Biodegradable industrial wastewater (paper production) has a COD of 600 mg/L. If the BOD progression follows first-order kinetics with a rate constant = 0.10 per day, determine the BOD.
Belief perseverance-functional fixedness : belief perseverance, functional fixedness, representative heuristics, confirmation bias, OR framing?
Explain what reaction conditions can change : What is the minor product? Explain why the one product is formed preferentially over the other. What reaction conditions can you change to favor the formation of the minor product?
Determine the cod : Determine the COD, carbonaceous BOD, and nitrogenous oxygen demand of a 100 mg/L solution of urea (N2H4CO)
Find the steel area required for beam : Find the steel area required for beam which has b = 10 in. and d = 17.5 in. to carry a factored load moment of 1,600 in-kips.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Engine suspended from a spreader beam

The 3.5-Mg engine is suspended from a spreader beam having a negligible mass and is hoisted by a crane which exerts a force of 40 kN on the hoisting cable. Determine the distance the engine is hoisted in 2.4 s, starting from rest.

  What is the flow rate that can be delivered

A water line to a home is usually 3⁄4" copper tube. What is the flow rate that can be delivered and still maintain laminar flow in the tube?

  Elevation and stationing of the low point

A 1600 ft long sag verical curve (equal tangent) has a pvc at station 1200+00 and elevation o 1500 ft. the initial grade is -3.5% and the final grade is 6.5%. determine the elevation and stationing of the low point, pvi and pvt.

  Determine the required pumping rate

Four pumps are to be used in 0.5-m diameter wells at the four corners of the site. Determine the required pumping rate. The aquifer has T = 1600 m^2/day and the wells each have a radius of influence of 600 m.

  Number of revolutions tub makes

A tub of a washing machine is rotating at 50 rad/s when the power is turned off. If it takes 15s for the tub to come to rest, determine (a) the constant angular deceleration, and (b) the total number of revolutions the tub makes.

  Possible characteristic or property of sanstone

Give one possible characteristic or property of sanstone and of the quartzite that made you decide not to select it for your concrete project?

  Description of the soil characteristics

For each of the horizons, provide a description of the soil characteristics and briefly describe the environment where you would expect to find the horizon?

  Thermo-gravimetry of calcium oxalate

Evaluate the percent mass loss for each of the three thermal events indicated on the attached TGA trace

  Define what are the quantitative measures of reliability

What are the quantitative measures of reliability (discuss measures for hardware, software, personnel, facilities, and data)?

  Highway construction project

A soil sample was taken from a proposed cut area in a highway construction project and sent to a soils laboratory for a compaction test, using the Standard Proctor compaction procedure. Results of the test are as follows:

  What is the probability that the second explosion

Cities cover approximately 0.5% of the Earth's land area, which itself constitutes 29% of the total surface of the planet. What is the probability that the second explosion in part (b) occurs over a city? Assume an equally likely probability of im..

  Compute the maximum service

Compute the maximum service (unfactored) concentrated live load that can be applied at 1ft from the free end of the cantilever. Use load and strength -reduction factors from ACI Code Sections 9.2 and 9.3. Also check As,min.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd