Determine the average force exerted by the parachute

Assignment Help Civil Engineering
Reference no: EM13305933

A 75-kg skydiver is falling at a speed of 250 km/h when, at a height of 245 m, the parachute is deployed, allowing the skydiver to land at a speed of 4 m/s. Modeling the skydiver as a particle and assuming that the skydiver follows a perfectly vertical trajectory, determine the average force exerted by the parachute from the moment of deployment until landing.

Reference no: EM13305933

Questions Cloud

Operations management project : Operations Management Project
Find coefficient of kinetic friction if car comes to stop : A classic car is d riving down an incline at 60 km / h when its brakes are applied. Treating the car as a particle, neglecting all forces except gravity and friction, and assuming that the tires slip
Money and banking problem set : There are two assets that consumers can use in order to provide for future consumption: there is a short-term liquid asset and a long-term illiquid asset - does the planner provide more or less liquidity insurance compared to the market allocation?
What is the maximum weight it can lift : A 0.14-kg balloon is filled with helium (density = 0.179 kg/m3). If the balloon is a sphere with a radius of 5.3 m, what is the maximum weight it can lift
Determine the average force exerted by the parachute : Modeling the skydiver as a particle and assuming that the skydiver follows a perfectly vertical trajectory, determine the average force exerted by the parachute from the moment of deployment until landing.
Determine the frequency of vibrations : The springs of a 1100 kg car compress 4.5 mm when its 68 kg driver gets into the driver's seat. what will be the frequency of vibrations
Determine the acceleration of each plate with a force : The coefficients of static and kinetic friction are 0.3 and 0.2, respectively, between each of the plates and between plate A and the ground. Determine the acceleration of each plate.
Estimate the required volume of the aeration tank : A town is going to upgrade its primary WWTP to a secondary plant that can meet the effluent standard of 25 mg/L BOD5 and 30 mg/L suspended solids. They have selected a CSTR activated sludge system for the upgrade.
What is the specific gravity of the wood : A 0.46 kg piece of wood floats in water but is found to sink in alcohol (specific gravity = 0.79) in which it has an apparent mass of 0.037 kg

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the cycle time for a single engine scraper

Determine the cycle time for a single engine scraper rated at 21 cy heaped that is used to haul material from a pit to a fill 900 ft away under severe conditions.

  Calculate the resistance coefficient k for a ball-type

Calculate the resistance coefficient K for a ball-type check valve placed in a 2-in schedule 40 steel pipe carrying 650 gal/min of oil (sg = 0.90)

  Source and destination addresses of router solicitation

Source and destination addresses of router solicitation, Given an IPv6 network, assume a host using EUI-64 addressing has a MAC address of00:24:E8:3D:CA:35

  Determining maximum acceleration and maximum velocity

The posItIon of a particle along a straight line is given by s = (t 3 - 9t 2 + 1St) ft, where t is in seconds. Determine its maximum acceleration and maximum velocity during the time interval 0 :5: t :5: 10 s.

  What is the so2 concentration caused only by second plant

An existing power plant has been found to produce SO2 concentration of 20µg/m3 at a distance of 800m directly downwind from the stack when the wind is 4m/s from the north during a class C stability situation.

  Determine the magnitude of force p acting on the crate

If the 50-kg crate starts from rest and travels a distance of 6m up the palne in 4s, determine the magnitude of force P acting on the crate. The coefficient of kinetic friction between the crate and the ground is \mu_k=.25

  Find what is the annual crash rate for the intersection

The four approach volumes per day at this intersection are 28,648, 23,856, 12,150, and 10,174. The crash totals for the last 3 years are 91, 96, and 87. What is the annual crash rate for this intersection

  Determine the average normal stress developed in each post

If all the posts have the same original lenth before they are loaded, determine the average normal stress developed in each post when post C is heated so that its temperature is increased by 20 degrees F.

  How many 3-4 inch diameter rivets are required to transmit

How many 3:4-inch diameter rivets are required to transmit 55,000 lb from the two angles to the gusset plate if the allowable shear stress in the rivets is 15,000 psi Assume each rivet carries the same amount of load.

  Determine flow rate of water that will cause a pressure drop

Determine the flow rate of water (20 degrees celcius) that will cause a pressure drop of 17250 N/m^2 in 350m of horizontal, cast-iron pipe (d=60cm). assume minor losses are negligibe

  Find the required width of the footing using terzaghis shear

The footing is supported to carry a net safe load of 400 kN/m^2 with FS = 3. Given Ysat = 20.85 KN/m^3 and phi = 35 degrees, find the required width of the footing using Terzaghi's general shear failure criterion.

  Plot the resulting concentration with downstream distance x

Write the mass balance equation for an ideal 1D plug-flow stream under steady state conditions with a first-order decaying substance. Solve for the concentration as a function of the concentration x=0, the rate constant kd, longitudinal distance x..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd