Determine the angular velocity of pinion gear and velocity

Assignment Help Civil Engineering
Reference no: EM13305925

The pinion gear rolls on the gear racks. If B is moving to the right at 8 ft/s and C is moving to the left at 4 ft/s, determine the angular velocity of the pinion gear and velocity of its center A.

Reference no: EM13305925

Questions Cloud

What is the specific gravity of the wood : A 0.46 kg piece of wood floats in water but is found to sink in alcohol (specific gravity = 0.79) in which it has an apparent mass of 0.037 kg
Find the horsepower added for the flow through the system : Find the horsepower added if the flow through the system is 400 m^3/s. The entrace is sharp, the two bends are equivalent to smooth 90 degree bends with R=1 ft, and there are two fully open gate valves
What is the mean velocity of air in the micro-channel : A micro-channel of diameter 0.5 mm and length 750 mm is connected to a plenum. A fan produces a negative gage pressure of -1.5 inch H2O in the plenum and draws air at 20oC into the micro- channel.
Estimate the pressure exerted on a floor : Estimate the pressure exerted on a floor by the following one pointed chair leg (56 kg on all four legs) of area = 0.06 cm2 N/m2
Determine the angular velocity of pinion gear and velocity : The pinion gear rolls on the gear racks. If B is moving to the right at 8 ft/s and C is moving to the left at 4 ft/s, determine the angular velocity of the pinion gear and velocity of its center A.
Estimate how far you will be able to focus : Let's say you have a prescription for contacts of -2 diopters. Estimate how far you will be able to focus
Professions codes of conduct ethics behaviour : You are required to choose two professional areas in which you have an interest and research those professions codes of conduct/ethics/ behaviour
Compute the flow rate in the channel and the critical depth : The water depth before the jump is 0.4 m and after the jump is 1.7 m. Compute the flow rate in the channel, the critical depth and the headloss in the jump.
What is the yeild to maturity at a current market price : A company bonds have 4 years left to maturity. interestis pain annually and the bonds have a $1000 par value and a couponrate of 9%.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is highest possible final grade in nighttime conditions

An equal-tangent sag curve has its PVI at station 10+00 and elevation at 138 ft. Directly above the PVI the bottom of an overpass structure is at elevation 162 ft. The PVC is at station 4+00. If the initial grade is -4.0%

  Find summer values for oxygen tranfer-hp and airflow rate

A fine-bubble aeration basin has a flow of 21.5 mgd, an influent BOD of 180 mg/l, 31 mg/l of mmonia, and effluent of 10 mg/l. During the winter, the wastewater temperature of 14.8 degrees C does not nitrify.

  Determine the velocity of the particle as a function of time

a particle moving along a straight path decelerates according to a = -kv. this represent a drag-induced deceleration. assume that the intial velocity is vo at t=0 and s = 0. determine the velocity of the particle both

  What is the recommendation to get a basic refrigerator

Quinton's refrigerator has just died. He can get a basic refrigerator or a more efficient refrigerator with an energy star designation. Quinton earns 4% compounded annually on his investments, he wants to consider a 10-year planning horizon

  What amount of water use is exceeded with the probability

Suppose the summer daily demand for water use in Phoenix is normally distributed with a mean of 310 million gallons/day and a standard deviation of 45 million gallons/day. Also suppose the city has reservoirs whose combined storage is 350 million ..

  List five soil and water management strategies

List five soil and water management strategies appropriate for agricultural use of ultisols. 100-150 word limit.

  Determine how far did the train travel during the time

A train moving at 100 km/hr decreases its speed to 80 km/hr in 3.5 seconds. How far, in meters, did the train travel during this time

  Calculate the maximum rod diameter

If the tensil testing machine can apply no more than 925 lbs. of force to the specimen, calculate the maximum rod diameter that should be used. (precision 0.000)?

  Compute data needed to stake the curve at 50 foot increments

Two Tangents intersect at a PI Station of 35+33.24 whose coordinates are N=10349.64 feet and E= 10436.79 feet. The Intersection angle (I) = 20°15'42" Right, and the azimuth of the back Tangent is 23°14'32". (This azimuth is from the PC to the PI.)

  Determine the reaction components at a and the tension

The hinge at A and the cable that attaches at points B and C support rigid bar ABC. Determine the reaction components at A and the tension in the cable.

  Calculate the surface area of the clay particles

The surface area of clay particles can be determined by measuring the number of adsorbate molecules it takes to form a monolayer. The adsorbate molecules used for these measurements are usually N2 gas, therefore partial pressure "P" is used instea..

  How to calculate the increase in weight of the tank

water flows into a weigh tank for 30 minutes. Calculate the increase in weight of the tank, if the discharge is 1.5 ft^3/s. The temperature is 50 F.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd