Determine the 2-year peak discharge prior to development

Assignment Help Civil Engineering
Reference no: EM13304967

A development is being planned within a 250-acre watershed. The present land use is 120 acres of pasture, with soil type B(CN=61), and the rest soil type D (CN=80). The Tc is 54 min. and the 2-year, 24-hour storm depth is 4 in. The surface are of farm ponds is 1.0%. Determine the 2-year peak discharge prior to development using the TR-55 method. Assume Type II rainfall.

Reference no: EM13304967

Questions Cloud

Compare the performance and risk of investment : Find the mean, median, range and standard deviation for the 2005 returns and estimate with 99% confidence the average order in the city.
Estimate the minimum do and the critical location in river : If the ultimate BOD of the mixed river water is 30mg/L, the rate constant for BOD at 20ºC is 0.6d-1, the reaeration rate constant at 20ºC is 0.8d-1, and the removal of BOD by sedimentation can be neglected
Explain how to determine the normal stress in rod ad : If the temperature of rod CF is increased by 10 degrees C and that of rod BC is decreassed by 40 degrees C, determine the normal stress in rod AD. The rods are two meters long.
What is the torque being exerted by this force : A uniform disk of mass M = 5.6 kg has a radius of 0.14 m and is pivoted so that it rotates freely about its axis. What is the torque being exerted by this force about the rotation axis
Determine the 2-year peak discharge prior to development : A development is being planned within a 250-acre watershed. The present land use is 120 acres of pasture, with soil type B(CN=61), and the rest soil type D (CN=80). The Tc is 54 min. and the 2-year, 24-hour storm depth is 4 in.
What frequency is heard by an observer : What frequency is heard by an observer who hears the 450-Hz siren on a police car traveling at 35 m/s away from her
Determine what is the unit discharge at 20 minutes : Assume a time to peak of 15 minutes and the unit peak discharge is 7.0 cfs/in, using the Gamma Function Unit Hydrograph what is the unit discharge at 20 minutes
What is the gram molecular mass : An unknown gas has a density of 1.584 kg/m3 at STP. (STP, for standard temperature and pressure, What is the gram molecular mass
Determine the scs time of concentration of a 400-ft : The channel has side slopes of 4H:1V and a longitudinal slope of 0.5%. Assume a depth of flow of 6-inches. The parking lot slopes at 1% toward the channel from both sides, and the 2-year, 24-hour rainfall is 2in.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Magnitude of shaft work obtained from the turbine

If the amount of heat transfer in the HE unit is 2460 kJ per kg of steam, what is the magnitude of shaft work obtained from the turbine in kW?

  What is the maximum acceleration from rest

The base engine develops 200 ft-lb of torque, and a modified version of the engine develops 240 ft-lb of torque. If the overall gear reduction ratio is 8 to 1, what is the maximum acceleration from rest (in ft/sec^2) for.

  Define holographic mobile phones

A young engineer has invented holographic mobile phones and has approached a venture capital company to invest in it. The venture capital company considers the product to be an all or nothing product

  Analyze the stability of the dam

Analyze the stability of the dam shown in the figure, if the friction coefficient between concrete and foundation is 0.70, and the specific weights of concrete and water are 24kN/m 3 and 10kN/m 3 , respectively.

  Find and plot initial vertical effective stress distribution

A 35 feet diameter oil storage tank is built on a 100 ft thick soil layer. The tank exerts an uniform pressure of 1000 pcf on the ground surface. The groundwater table is 10 ft below the ground surface.

  What is the spring constant

suppose you apply a force of 14.4 N to a spring and it stretches 2.4 cm. what is the spring constant?

  Calculate the deflection of the beam

Also calculate the deflection of the beam to check that it complies with the design limit of L/200. Only variable actions are required for deflection check.

  Determine how many bolt and hole have to be recycled

You are going to assemble 1,000 bolt + hole combinations. The bolts have a mean diameter of 1.000 cm, normally distributed with standard deviation of 0.010 cm. The holes have a mean diameter of 1.030 cm, normally distributed with standard deviatio..

  Draw a plan of a typical strip mine

Draw a plan of a typical strip mine showing all operational features and equipment and why is the working slope of an open pit usually much flatter than the final slope?

  How to use design chart for r for grade 60 reinforcement

Select the number and size of reinforcing bars required to resist a total factored moment of 180 ft. kips for a rectangular section with b = 12 in., d = 19.5 in., h = 24 in., f'c = 4 ksi, and fy = 60 ksi.

  Explain indicated concentrations of total volatile solids

Influent sample collected from a wastewater treatment plant was analyzed for various solids concentrations. Results indicated concentrations of Total Volatile Solids (TVS)

  Define left side as starting and the right side as ending

Create a precedence (activity-on-node) diagram based off the attached activity list. You must follow the below recommendations as we discussed in class. 1) draw nodes as rectangles. It helps define the left side as starting and the right side as en..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd