Determine speed of block after it has compressed the spring

Assignment Help Civil Engineering
Reference no: EM13318165

a 20 kg block slides along the rough surface for which the coefficient of kinetic friction is 0.2. The block strikes a nonlinear spring with a speed of v=4.5 m/s. The spring is termed "nonlinear" because it has resistance of Fs=ks^2 where k = 900 N/m^2. Determine the speed of the block after it has compressed the spring s=0.2m?

Reference no: EM13318165

Questions Cloud

Explain what is the pressure of the mixture : 1.2 mol of helium is mixed with 2.3 mol of argon in a volume of 1.0L and a temperature of 25.0C. Assuming that helium and argon are perfect gases, what is the pressure of the mixture
How far would the launching machine slide on the moon : The question below was asked before, but this seems to ignore that the launching machine should have static friction as well, How far would the launching machine slide on the Moon
Define throughput in regards to wireless network : Define throughput in regards to wireless network and use a practical method to measure throughput of a wireless network? You should provide any appropriate screenshots.
Compute the volume in ml of 1.2 mol of a perfect gas : Calculate the volume (in mL) of 1.2 mol of a perfect gas at 25.0C and a pressure of 1.02 atm.
Determine speed of block after it has compressed the spring : a 20 kg block slides along the rough surface for which the coefficient of kinetic friction is 0.2. The block strikes a nonlinear spring with a speed of v=4.5 m/s. The spring is termed "nonlinear" because it has resistance of Fs=ks^2
Determine at what rate is the energy being dissipated : A coil has an inductance of 0.45 H and a resistance of 42 ohms. The coil is connected to a 5.6 V ideal battery. At what rate is the energy being dissipated
Compute the transverse speed and acceleration : A transverse wave on a string is described by the wave functionA transverse wave on a string is described by the wave function y=(0.120m)sin((pi*x)/8 +4*pi*t). Determine the transverse speed and acceleration
Complete and balance the equation for reaction : Predict whether the following reactions will occur or not. For those that do occur complete and balance the equation. Write No Reaction for those that do not occur include all subscripts
Find the amplitude of the current at that same instant : A charged capacitor is connected to an inductor. At time t = 0 the charge on the capacitor is Q = 6 %u03BCC. find the amplitude of the current at that same instant

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the rate of removal and the rate constant

A toxic compound being is removed from solution in a CSTR at Steady State according to a first order reaction rate. The upstream concentration of the pollutant is 14 mg/L and the downstream concentration is 1.7 mg/L.

  Calculate the compressive normal stress in the bar

A stainless steel (304) bar with a cross section of 0.2" x 0.4" is cut to a length of 30" and placed between two immovable walls at a  temperature of 40 degrees F. The operating temperature for the bar is 200 degrees F.

  Determine what is the specific yield of the aquifer material

The area is about 100,000 ha, the ground water pumping about 500 million m3 per year, and the water table drop about 3 m per year. Assuming no replenishment, what is the specific yield of the aquifer material

  What is stress to load ratio at depth of 2b below the centre

for a uniformly loaded square area, what is the stress to load ratio at a depth of 2B below the CENTER of the loaded area

  Find metric tons of gravel required to fill a excavated area

Calculate the metric tons of gravel required to fill an excavated area 70 meters by 50 meters by 2 meters deep if the gravel has a density of 1890 kg/(m^3).

  What is the name of the text book and author used

What is the name of the text book and author used for thr course CEE30 in the spring quarter of 2013, at University of California Irvine?

  Describe the measurements that would have to be taken

describe the measurements that would have to be taken and the equations that would have to be used to determine G23, V32, and E2 for a specially orthotropic transversely isotropic material from a single tensile test.

  Determining the velocity of motor having constant power

A constant power of 1.5 hp is supplied to the motor while it operates with an efficiency of ε = 0.8. Determine the velocity of the 200-lb crate in 15 seconds, starting from rest. Neglect friction.

  What is vertical stress increment due to the load at a point

A concentrated load of 200 kips is applied to the ground surface. What is the vertical stress increment due to the load at a point 15 ft below the ground surface at a horizontal distance of 10 ft from the line of the concentrated load

  What quantity of ice melts

A 3.60-g lead bullet at 28.0 degrees C is fired at a speed of 230 m/s into a large block of ice at 0 degrees C, in which it embeds itself. What quantity of ice melts?

  What is probability that it will be found by both inspectors

Items are inspected for flaws by two quality inspectors. If a flaw is present, it will be detected by the first inspector with probability 0.9, and by the second inspector with probability 0.7. Assume the inspectors function independently.

  Calculate the change in reservoir pore volume in barrels

A reservoir cover is 12,000 acres and is 20 feet thick. The formation has initial porosity of 0.25. The pore volume compressibility of the reservoir rock is 3.0 x 10^(-6) psi^(-1) .

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd