Determine number of revolutions it must undergo to acquire

Assignment Help Civil Engineering
Reference no: EM13305547

A wheel has an initial clockwise angular velocity of 12 rad/s and a constant angular acceleration of 3 rad/s2. A) Determine the number of revolutions it must undergo to acquire a clockwise angular velocity of 15 rad/s. B) What time is required?

Reference no: EM13305547

Questions Cloud

Find the height of the bottom of the mirror : You hold a small plane mirror 0.50 m in front of your eyes, Find the height of the bottom of the mirror such that the lowest point the person can see on the building is 22.9 m above the ground
Design a ssf constructed wetland and a tile drain for house : A family of six in a five bedroom house would like to treat their wastewater in an onsite septic system, constructed wetland, and tile drainage (leach field) system. They will be generating a maximum of 1.2 m3/d of septic tank effluent.
What are the equilibrium price and quantity : Refer to Table 4-5. The equations above describe the demand and supply for Chef Ernie's Sushi-on-a-Stick. What are the equilibrium price and quantity (in thousands) for Chef Ernie's sushi?
How the function delete can be implemented for arrays : Explain in details how the function Delete() can be implemented for arrays to function exactly as it would with lists. Use pseudo code to clarify your explanation.
Determine number of revolutions it must undergo to acquire : A wheel has an initial clockwise angular velocity of 12 rad/s and a constant angular acceleration of 3 rad/s2. A) Determine the number of revolutions it must undergo to acquire a clockwise angular velocity of 15 rad/s.
The sample mean is an unbiased estimator for m : 1. (1) Let y(t) be a time series with a constant mean E(y(t))=m. Show that the sample mean is an unbiased estimator for m.
Determine the speed of each car just after the collision : The 15-Mg tank car A and 25-Mg freight car B travel towards each other with the velocities. If the coefficient of restitution between the bumpers is e=0.6, determine the speed of each car just after the collision.
Determine the stoichiometric oxygen requirement for fuel : Determine the Stoichiometric oxygen requirement (pounds of oxygen per pound of fuel) for a fuel containing by weight 50% n-octane,25% 1-heptene and 25% methanol.
What will be change in partial pressure of carbon dioxide : A stack gas at 1.1 atmospheric pressure has a mixture below. what will be the change in partial pressure of carbon dioxide if the gas temperature is lowered from 2000 degrees K to 1000 degrees K

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the maximum allowable tensile force

An aluminum link is subjected to axial tension. The loading is limited by the conditions of not yielding and not elongating excessively. The yield limit is satisfied if the stress remains below 50%of the 325M Payield stress.

  Spreader beam and hoisted by a crane

The 3.5mg engine is suspended from a 500 kg spreader beam and hoisted by a crane which gives it an acceleration of 4m/s^2 when it has a velocity of 2m/s. determine the force in chains AC and AD during the lift.

  Convert all quantities to si units then convert it to mph

Assume the plane is flying at an altitude of 32,810 ft (10 km), where the temperature is -8 C and the pressure is 250 mb. The Pitot-static tube measures a piezometric pressure difference corresponding to 1.206 psi. What is the airspeed in both m/s..

  Determine what will be the max torque of a solid steel shaft

A solid steel shaft of circular cross section and diameter 6 inches in pure torsion under torque. If E=30x10^6 pse and max shear stress is 30 ksi, calculate the torque. If the shaft was hollow, with an innner diameter of 2 inches and outer diameter..

  How many months of use necessary for the two to break even

One can lease a car for $550 per month with no down payment or purchase one for $20,000 now. If the nominal interest rate is 8% per year, how many months of use necessary for the two to break even

  Define base isolation technique has become the method

Base isolation technique has become the method of choice for structural design of buildings and bridges located in highly seismic areas in recent years.

  What is the stationing of the pt on the same highway

A crest vertical vurve and a horizontal curve on the same highway have the same design speed. The equal-tangent vertical curve connects a +3% initial grade with a +1% final grade and has a PVC at 101+78 and a PVT at 106+72

  Determine how far did the train travel during the time

A train moving at 100 km/hr decreases its speed to 80 km/hr in 3.5 seconds. How far, in meters, did the train travel during this time

  Probability of finding a bad rivet

Samples of 20 rivets for a steel structure are checked for quality every hour. The probability of finding a bad rivet that has to be scrapped is 1%.assume that x is the number of parts in the sample of 20 that have to be scrapped.

  Plot the drawdown after 4 hours as function of position

a confined aquifer with a transmissivity of 7.0x10^-3 m^2/s and a storativity of 5.0x10^-4 is pumped by two wells 35 m apart. One well is pumped at 7.6 L/s and the other at 15.2 L/s.

  Determine the constant angular deceleration

A tub of a washing machine is rotating at 50 rad/s when the power is turned off. If it takes 15s for the tub to come to rest, determine (a) the constant angular deceleration, and (b) the total number of revolutions the tub makes.

  Is the flow laminar or turbulent and find reynolds number

For Oil (SG=0.86, u=0.025 Ns/m^2) flow of 0.3m^3/s through a round pipe with diameter of 500 mm, determine the Reynolds number. Is the flow laminar or turbulent

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd