Determine maximum shearig stress in the shaft

Assignment Help Civil Engineering
Reference no: EM13310443

a hollow steel shaft with an outside diameter of 400 mm and inside diameter of 300mm is subjected to the torque of 300 Kn. The modulus of rigidity for the steel is 80 GPa. determine

a) maximum shearig stress in the shaft.

b) the shearing stress on a transverse cross section a the inside surface of the shaft

C) magnitude of the angle of twist in a 2 meter length

Reference no: EM13310443

Questions Cloud

How long would it take for consolidation of the clay : A 4m deep clay layer is underlain by impermeable shale. A sample of clay from the layer is subjected to an appropriate increment of stress in a consolidation test giving the following results
Suppose ikes bikes is expecting to produce 500 bikes : Ike's Bikes is a major manufacturer of bicycles. Currently, the company produces bikes in one factory. However, it is considering expanding production to two or even three factories.
What was the initial speed of the puck : In a shuffleboard game, the puck slides a total of 12 m before coming to rest. what was the initial speed of the puck
How long would site take for the clay layer to achieve : A 3m deep layer of clay is underlain by impervious rock. An extensive area of fill is to be placed over the site. How long would it take for the clay layer to achieve 90% of its total final settlement.
Determine maximum shearig stress in the shaft : a hollow steel shaft with an outside diameter of 400 mm and inside diameter of 300mm is subjected to the torque of 300 Kn. The modulus of rigidity for the steel is 80 GPa.
Interview a businessperson who makes decisions : Interview a businessperson who makes decisions
Determine the length of the middle ordinate : a simple horizontal curve has a central angle of 35 degrees-40 minutes-40 seconds, and a degree of cure (arc definiton) of 5 degrees -00 minutes-00 seconds.
Determine the equation of the wave : A wave traveling in the +x direction has an amplitude of 0.186 m, a speed of 3.27 m/s, Write the equation of the wave
Explain weak bases ionizes water to form oh : Write equations showing how each of the following weak bases ionizes water to form OH- a) HCO3- b) CH3NH2 Identify all of the phases

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the largest allowable magnitude of f2

A square with the dimensions of .02m by .02m by .5m is attatched to a solid surface. If the forces on the rod are too large, it will either crush or be sheared off where it is atatched to the solid surface.

  Determine the isentropic efficiency of the turbine

Steam enters an adiabatic turbine steadily at 3 MPa and 300 *C and leaves at 70 Kpa and 100 *C. If the power output of the turbine is 2 MW, determine a) the isentropic efficiency of the turbine and b) the mass flow rate of the steam flowing throug..

  Find what design speed was used for freeway exit ramp

A freeway exit ramp has a single 12-foot lane and consists entirely of a curve with a central angle of 90 degrees and L=628 feet. If the distance cleared of obstacles is 19.4 feet from the centerline, what design speed was used

  Find the z centroid for the cone the scoop of ice cream

A single-scoop ice cream cone is a composite body made from a single scoop of ice cream placed into a cone.  Assume that the scoop of ice cream is a sphere with radius r=1.45in that is placed into a 4.00in tall cone.

  What surface area in square meters must she cover

A worker is to paint the walls of a square room 8ft high and 12 ft along each side. what surface area in square meters must she cover?

  Calculate the water content and degree of saturation

A particular soil has a total (moist) unit weight of 122 pcf and a dry unit weight of 101 pcf. The specific gravity of soil is 2.70. Calculate the water content and degree of saturation.

  What is the over consolidation ratio of the soil

an increment of vertical stress of 150kpa compress the sample to a void ratio of1.43. what is the over consolidation ratio of the soil at the unloaded condition.

  Calculate how much energy must be added to the system

A piston-cylinder contains 40 kg water of which 20 kg is saturated liquid. The equilibrium pressure of the system is 100 kPa. a) Find the system initial volume b) The water undergoes an isothermal expansion until the pressure reaches 10 kPa.

  Calculate the accumulated depreciation at the end of 4 years

An asset has an initial cost of $45,000 at the end of 4 years the salvage value of the asset is $5,000. Using the sum of the years' digits, calculate the accumulated depreciation at the end of the 4 years.

  Determine what is the final concentration of cfu-l

A hypothetical water treatment train consisting of coagulation/flocculation unit, filtration unit and chlorination system is used to treat surface water characterized by bacterial concentration of 800,000 CFU/L.

  Calculate ground-level concentration downwind and crosswind

At noon on a sunny summer day with a surface wind speed of 4m/s, SO2 is released over rough terrain from a 90m stack at a rate of 400g/s. Assume that the plume rise is 60m.

  Determine the chemical oxygen demand cod of a mixture

Determine the chemical oxygen demand (COD) of a mixture of 250 mg/l glutamic acid (C5H10N2O3) and 200 mg/l of glucose(C6H12O6).

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd