Determine if the screen needs to be cleaned why or why not

Assignment Help Civil Engineering
Reference no: EM13323575

A manually cleaned bar screen has bars with a thickness of 8-mm (0.31-in) and openings 25-mm (0.98-in). After operating for a period of time, assume that the opening size decreases to 10-mm due to the accumulation of materials (debris) on the screens. If the approach velocity is 0.68 m/s (2.3 ft/s), determine if the screen needs to be cleaned. Why or why not?

Reference no: EM13323575

Questions Cloud

Write a program that plays a simple trivia game : Write a program that plays a simple trivia game. The game should have five questions. Each question has a corresponding answer and point value between 1 and 3 based on the difficult of the question.
What is min sight distance that should be provided on road : f the design speed of a multi-lane highway is 60 mph, what is the minimum sight distance that should be provided on the road if (a) the road is horizontal and (b) the road has a maximum grade of 5 percent
What is the direction of the balls displacement : A ball rolling on a table has a velocity with rectangular components vx = 0.50m/s and vy = 0.60m/s. What is the direction of the balls displacement
Evaluate the molar solubility of pb(io3)2 in water : Calculate the molar solubility of Pb(IO3)2 in water by systematic method. {ksp for Pb(IO3)2 = 2.5 x 10^-13}
Determine if the screen needs to be cleaned why or why not : After operating for a period of time, assume that the opening size decreases to 10-mm due to the accumulation of materials (debris) on the screens.
What is the volume of the bubble : A scuba diver is 32 m below the surface of a lake, where the temperature is 5°C. What is the volume of the bubble right before it breaks the surface
Write a program that uses a nested for loop : Write a program that uses a nested for loop to compute the average grade for a class of 12 students in each of three subjects. The program asks the user to enter the grade of each student in subject 1 and computes the average for that subject.
Define what are the total pressure and the partial pressures : Hydrogen (H2(g)), 100.L at 380.mm Hg reacts at 150°C in a 110.L container with oxygen O2(g) (10.0L at 3.00 atm) to give water (H2O(g)). (a) How many moles of H2O(g) much water is formed? and (b) What are the total pressure and the partial pressure..
What is the shape of a water droplet from a leaking tap : What is the shape of a water droplet from a leaking tap. How does that shape change before and after dropping from the tap. What properties of fluids play a role in this change in shape.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find how many dimensionless parameters govern the problem

The flowrate Q over a rectangular sharp crested weir depends on the width of the notch b, the head on the weir H, and the acceleration due to gravity g. Find how many dimensionless parameters govern this problem.

  Determine number of revolutions it must undergo to acquire

A wheel has an initial clockwise angular velocity of 12 rad/s and a constant angular acceleration of 3 rad/s2. A) Determine the number of revolutions it must undergo to acquire a clockwise angular velocity of 15 rad/s.

  Determine the forces acting on the bracket at point c

The L bracket shown below is pinned to the ground at point C and attached to a single cable at points A and D that wraps around a frictionless pulley at point B. Determine the forces acting on the bracket at point C and then tension in the cable.

  What is temperature in stream downstream of cooling tower

A discharge from a power plant cooling tower has a temperature of 81 degrees C and flows into the stream at a rate of 3 cubic meters per minute. What is the temperature in the stream downstream of the cooling tower discharge

  Find what is the hydrostatic pressure force on the hatch

A circular hatch, 2-m in diameter has its top 10-feet under water ( fresh water s.g = 1.0), and is oriented vertically in the water column. What is the hydrostatic pressure force on the hatch, in Newtons.

  Determine what force was needed to buckle the bar

On a very hot day, I saw a 1.6 meter long steel bar held between two rigid supports that had buckled due to the heat. The bar had a cross section of 10 mm by 40 mm, and I assume was A36 steel.

  Determine the magnitude of the acceleration of point p

A wheel has an angular acceleration of alpha=(0.5*theta) rad/s^2 , where theta is in radians. a) Determine the magnitude of the velocity of point P located on its rim after the wheel has rotated 2 revolutions.

  Find the magnitude of r dot and theta double dot at t

If r = (theta)2 and theta = 2t, find the magnitude of r dot and theta double dot when t = 2 s

  Compute the nominal flexural strength of the beam

A rectangular beam made using concrete with f'c = 6000 psi and steel with fy=60000 psi has a width b= 20 in. The concrete modulus of rupture fr=530 psi.

  How many acres in size would an aerated lagoon need

A small town produces 0.15 MGD of wastewater. How many acres in size would an aerated lagoon need to be to treat this wastewater assuming a depth of 8 ft. and a detention time of 6 days

  Find excess solids production of extended aeration process

Estimate teh excess solids production of an extended aeration process treating unsettled wastewater with a BOD of 200 mg/l and suspended solids concentration of 240 mg/l, assuming k=0.35.

  What and where will be the maximum fluid pressure

A 10cm diameter vertical tank holds 20cm of water topped with 15cm of ethyl alcohol. The cylinder is rotated about its central axis at a rotation rate of 20 rad/s. (a) What will be the shape of the air-alcohol and alcohol-water interfaces

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd