Determine how much sand did driver place in the drum

Assignment Help Civil Engineering
Reference no: EM13300565

A truck driver used sand to soak up a 1 g spill of lindane (C6H6Cl6). He placed the contaminated soil in an open drum which then filled with 150 L of water during a rainstorm. You test the water and find a concentration of 17 M/L. The partition coefficient for this chemical to the soil is 0.8 L/kg. How much sand did he place in the drum? Hint: the total mass of the lindane spill is now split between the water and the soil according to the partition coefficient.

Reference no: EM13300565

Questions Cloud

Determine distance between the stones another second later : A stone A is dropped from rest down a well, and in 1 second another stone B is dropped from rest. Determine the distance between the stones another second later.
Find the total number of revolutions turned : A machine shop grinding wheel accelerates from rest with a constant angular acceleration of 2.6 rad/s^2 for 7.6 s, Find the total number of revolutions turned
Determine what is the final river temperature downstream : A toothpaste factory situated on a large river disposes of a waste water containing villiamite (NaF) to the river on a continuous basis. The minimum flow in the river is 210 m3/s, and the discharge rate from the treatment plant is 12.5 m3/s.
What will be the effects of an increase in real output : What will be the effects of an increase in the money supply on the interest rate? What will be the effects of an increase in real output on the interest rate?
Determine how much sand did driver place in the drum : A truck driver used sand to soak up a 1 g spill of lindane (C6H6Cl6). He placed the contaminated soil in an open drum which then filled with 150 L of water during a rainstorm. You test the water and find a concentration of 17 M/L.
Compute more than one annuity value : Compute more than one annuity value then figure out how to combine them. Chose the interval that contains your calculated answer.
Explain how many moles of hcl must be added : A buffer is prepared by adding 150 mL of 1.0 M NaOH to 250 mL of 1.0 M NaH2PO4. How many moles of HCl must be added to this buffer solution to change the pH by 0.18 units
Find fraction of the light intensity is transmitted : Sunlight falls on two polarizers with their polarization axes oriented 57° to one another. What fraction of the light intensity is transmitted
Managerial report : Prepare a report (see below) with your ranking of the judges based on the probabilities and conditional probabilities as well as the analysis of each court. Include the following seven (7) items in table format to support your ranking. Be sure to use..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the total elongation of the cable due to load

A 1-inch elevator cable is 1000 feet long. The modulus of elasticity for the cable is 25,000,000 psi. Determine the total elongation of the cable due to a load of 20,000 pounds.

  Find dry unit weight of the sample and water content

An undisturbed soil sample was collected in a sampling tube of internal diameter 5cm. The length of the extracted sample was 10.2 cm and its mass was 360 g. After oven drying the mass reduced to 326.5 g.

  Determine the horizontal spacing of the vertical drain

determine the horizontal spacing of the vertical drains if the drains are installed in triangular grid to reach 90% of primary consolidation in 1.5 years after the commencement of fill placement

  What criteria should zachary use evaluate the project

what criteria should Zachary use evaluate the project ?

  Explain how the difference in piezometric pressure

A manometer is used to measure the pressure difference between points A and B in a pipe. Water flows in the pipe, and the specific gravity of the manometer fluid is 2.8. The distances and manometer deflection are indicated.

  Determine what is the concentration of pce in the lake

An industry discharges PCE (tetrachloroethene, tetratchloroethylene, or perchloroethylene) into a small, well-mixed lake. The influent concentration is 0.4mg/L and the hydraulic residence time of the lake is 5days.

  Dimensions of symmetrical trapezoid plate

The plate is submerged in a liquid is a vertical position with the parallel sides horizontal and the shorter parallel side at the top and exactly in the surface of the liquid.

  Determine the normal stress on the outside of the frame

A building frame is made with a 10" square steel box shape that has an area of 15 in^2 and a moment of inertia I =225 in^4. The frame consists of pinned supports at points A and F and an internal pin at point D.

  Cause of heading-up of the water surface

A rectangular channel 2.0 m wide carrying a discharge of 2.5 m3/s is to be fitted with a weir at its downstream end to provide a means of flow measurement as well as to cause heading-up of the water surface.

  Principle of lateral continuity

Would you expect to find the Tapeats Sandstone on top of the Great Unconformity in all places in the Grand Canyon? Why, or why not?

  What type of contract would you want and why

If you were asked to perform an excavation contract competitively with limited data, what type of contract would you want and why?

  Explain the difference between piezometer and tensiometer

Briefly explain the difference between piezometer and tensiometer with respect to the working principle, special design consideration and limitation of the instrument.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd