Determine how many pounds you need to gain or lose to fit

Assignment Help Civil Engineering
Reference no: EM131031566

The range of healthy weight for adults is usually expressed in terms of the body mass index (BMI), defined, in SI units, as

where W is the weight (actually, the mass) of the person in kg and H is the height in m, and the range of healthy weight is 19 ≤BMI ≥ 25. Convert the previous formula to English units such that the weight is in pounds and the height in inches. Also, calculate your own BMI, and if it is not in the healthy range, determine how many pounds (or kg) you need to gain or lose to be fit.

Reference no: EM131031566

Questions Cloud

Define how long this person needs to climb stairs : A 150-pound person burns 400 Calories per hour while climbing stairs. Determine how long this person needs to climb stairs to burn off the dinner calories.
Write a six pages paper about alcohol in aviation : Write a six pages paper about alcohol in aviation use 3 resources for this paper. I will provide you 1 source then you add the other 2 sources.
Determine the weight difference between these two friends : If these two friends are very much alike otherwise and they have the same metabolic rate, determine the weight difference between these two friends in a year.
Evaluate the specific preparation steps in preparedness plan : Prepare a narrated presentation, using PowerPoint or other similar software, detailing a bioterrorism-related issue, analyzing the threat(s) that the bioterrorism-related issue poses.
Determine how many pounds you need to gain or lose to fit : Convert the previous formula to English units such that the weight is in pounds and the height in inches. Also, calculate your own BMI, and if it is not in the healthy range, determine how many pounds (or kg) you need to gain or lose to be fit.
Discuss what your plan of care would be : Discuss what your plan of care would be, including differential diagnoses and diagnostic exams for patients that present with the following conditions.
Determine additional assessment data that may be needed : These tools can help you determine additional assessment data that may be needed, develop a list of differential diagnoses, list of diagnostic exams that may be needed and also help with your plan of care.
Determine how long it will take him to lose 5 kg : A 100-kg man decides to lose 5 kg without cutting down his intake of 3000 Calories a day.
Implementation of a time-series prediction method : Have to use random forest prediction by using R or python programming langauage - The specific problem in this project is about the time-series data trend prediction.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the change in internal energy of the system

What is the change in internal energy of the system? Assume the displacement work in a (fully resisted) constant pressure process is given by (*sub 12 means from stage 1 to 2) Wsub12=p(Vsub2-Vsub1).

  Plot the magnitude of the force exerted on the gate

A 200lb homogeneous gate of 10ft width and 5ft length is hinged at point A and held in place by 12ft long brace as shown in fig 2.69 as the bottom of the brace is moved to the right the water level remains at the top of the gate. the line of action o..

  Does our non-destructive test have the required sensitivity

To be sure that the part does not fail, we plan to ensure that the maximum applied stress is only one third of the tensile strength. We use a non-destructive test that will detect any internal flaws greater than 1.25 mm long.

  Determine the aeration period and f by m ratio

Two activated sludge aeration tanks in Podunk, MO are operated in series. Each tank has the follwing dimensions: 7.0 m wide x 28.0 m long x 3.5 m effective liquid depth.

  Determine the number of bricks and cubic feet of mortar

determine the number of bricks and cubic feet of mortar required for 100 square feet of wall. the ties are to be spaced 16 inches on center vertically and 24 inches on center horizontally

  A timber beam 6 in wide by 12 in deep is loaded and

a timber beam 6 in. wide by 12 in. deep is loaded and supported as shown below. the modulus ofnbspelasticity of the

  Estimate the weight of concrete in four-lane highway segment

Estimate the weight of concrete in a four-lane highway segment that begins as a 3% grade climb from 1000 feet altitude to 4000 feet and then a 6% downgrade to 2500 feet

  Determine the local acceleration and the total acceleration

At point 1 and point 2, it is also measured that dv1/dt = 20 m/s^2 and dv2/dt = 50 m/s^2 respectively. Determine the local acceleration, the convective acceleration, and the total acceleration at point 1 and 2 at t = 0

  Determine the largest loadwhich can be applied

A block of 250mm length and 50x40mm cross section is tosupport a centric compressive load P. The material to be usedis a bronze for which E = 95GPa. knowing that the normal stress must notexceed 80 MPa and that the decrease in length of the block sho..

  Estimate the power the device can produce at a wind speed

The U.S. Department of Energy (DOE) constructed a Darrieus vertical-axis wind turbine in Sandia, New Mexico. The machine is 60.0-ft tall and 30.0-ft in diameter, and swept an area of 1200 ft 2.

  Can it be concluded that fewer than half of the incinerators

Incinerators can be a source of hazardous emissions into the atmosphere. Stack gas samples were collected from a sample of 50 incinerators in Chicago. Of the 50 samples

  Explain how to classify the column as slender or non slender

Assume that at one end of the column a clockwise moment of 100 k-ft is present, and that at the other end of the column a counter-clockwise moment of 25 k-ft is present. you may assume that k= 1.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd