Determine how many bars of size number 8 will be require

Assignment Help Civil Engineering
Reference no: EM13320093

Calculate the area of the reinforcement required( As) in a singly reinforced rectangular beam required to carry an ultimate factored bending moment ( Mu = 140 Kip-ft). Use( f'c=3,000 psi) and( fy=40,000 psi). Use a beam width of 12 inches, a total depth of 22 inches and an effective depth of 19.5 inches. Sketch the beam section in detail. How many bars of size number 8 will be require and will they fit in one or two rows if you use stirrup number 3, and a 1.5 inch concrte cove.

Reference no: EM13320093

Questions Cloud

Estimate the shear strength on a horizontal plane at a depth : A site is underlain by a soil that has a unit weight of 118 lb/ft^3. From laboratory shear strenght tests that closely simulated the field conditions, the total stress parameters were measured to be C_T=250 lb/ft^2
Find the equivalent resistance of the electrical system : NASA has attempted to use the concept of motional EMF to produce energy for satellites in orbit. what is the equivalent resistance of the electrical system of the satellite
Determine a set of rectangular beam design values of steel : Determine a set of rectangular beam design values (b),( d) and (As) area of steel, that will be needed to support a factored bending moment (Mu=450 Kip-ft). Use (f'c=4,500 psi) and (fy=40,000 psi).
Find braking force must its rockets provide : A 81.0kN spaceship comes in for a vertical landing. From an initial speed of 1.00 km/s, What braking force must its rockets provide
Determine how many bars of size number 8 will be require : Calculate the area of the reinforcement required( As) in a singly reinforced rectangular beam required to carry an ultimate factored bending moment ( Mu = 140 Kip-ft). Use( f'c=3,000 psi) and( fy=40,000 psi).
Explain the equilibrium constant for the reaction h2o : If the equilibrium constant for the reaction H2O + CO = CO2 + H2 is 2.5, the equilibrium conversion of CO is lower than 65%
What is the speed of the bullet & block system : A small pistol fire a 1.5g bullet at 1000 m/s. The bullet strikes a 200g wooden block resting on a horizontal frictionlessl surface, What is the speed of the bullet &block system after the bullet had been embedded in the block
The indefinite future : Assume the inflation rate in Canada to be 5 percent per year for the indefinite  future.
Define conversion of reactants to products is spontaneous : If the enthalpy change for the reaction is 20 kJ/mol and the entropy change is 50 J/mol/K, the conversion of reactants to products is spontaneous above 400 K.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Approximate the change in length of the cable

When loaded, the beam carries a 10-kN/m uniformly distributed load. Neglecting the weight of the cable, approximate the following: (a) The change in length of the cable when the beam is under load

  Determine the relative humidity using psychrometric chart

The wet bulb and dry bulb temperatures for humid atmospheric air (at 100 kPa) are measured to be 20 C and 25C respectively. Determine: a. using the psychrometric chart, the relative humidity  b. using the psychrometric chart, the humidity ratio

  How to compute the saturated unit weight of the silt

All the silt is saturated even after the water table is lowered. (In this problem, treat the unit weight above the water table as bulk unit weight and the unit weight below the water table as saturated unit weight.)

  Determine the flow rate of a 2-inch diameter glass pipe

A 2-inch diameter glass pipe is connected to a pipe network in which the pressure is 70 psig. If the length is 300 ft and the outlet is 10 ft above the pipe, determine the flow rate.

  Compute semiannual coupon payment investor will receive

If, on 8/1/2019, 3-year municipal bonds with an AA- rating and a coupon rate of 6.50% (payable semiannually) are selling for $100.00, what would be the fair market value of the 300 Whittier bonds (not including the 8/1/2019 coupon payment)

  Determine the vertical stress of 4m below the centre

Determine the vertical stress of 4m below the centre of shallow foundation 3 x 3m carrying a uniform pressure of 275 kN/m3. Plot the variation of vertical stress with depth (up to 10m) below the centre of the foundation

  Find the required minimum area for the heat transfer

Assume that the wall separating the steam and seawater is 4 mm of steel, with con- ductivity of 15 W/m K, and that a maximum 5oC difference between the two fluids is allowed in the design.

  Determine length of an interval of time for atleast one call

determine the length of an interval of time such that the probability of at least one call in the interval is 0.90

  Explain can the system be viewed as being a pure substance

A system consists of liquid oxygen in equilibrium with oxygen vapor. How many phases are present The system undergoes a process during which some of the liquid is vaporized.

  What are the important findings

What are the important findings in Austin Road Co. v. OSHRC and Builders Steel Co. v. Marshall? Your response should be approximately 200 - 300 words and include a reference citation for your response.

  Describe what is the maximum acceptable internal pressure

of 2640 psi with a factor of safety of 2.0 with respect to yielding. the yield stress of the steel is 65,000 psi in tension and 32,000 psi in shear. the diameter of the tank is 7.0 in. the minimum required wall thickness is 0.289 in.

  Explain why would it be dangerous to use the material

A structural component in the form of a very wide plate is to be fabricated from 4340 steel that was cooled using a fast cooling rate and has a yield strength of 1515 MPa and a fracture toughness (KIC) of 60.4MPam.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd