Determine corresponding height of capillary rise in soil b

Assignment Help Civil Engineering
Reference no: EM13326409

The void ratio of a given soil A is twice that of another soil B,while the effective size of particles of soil A is one-third thatof soil B. The height of capillary rise of water in soil A on acertain day is found to be 400 mm. Determine the correspondingheight of capillary rise in soil B.

Reference no: EM13326409

Questions Cloud

Find the magnitude of the velocity at t seconds : A motorcycle starts from rest at time t=0. The force on it from t=0to 30 seconds is F=300-9t. The combined mass of the motorcycle andthe rider is 225 kg.
Calculate pressure at the clay-sand interface for two cases : A clay lense of Kc=0.10cm/day is sandwiched somewhere inside a vertical soil column of height 100cm that is otherwise filled withsand of Ks=200cm/day. A depth of water d=10cm is ponded above the surface.
Find the magnitude of frictional force acting on mass : Consider two masses (M=50 kg, m = 10 kg) connected by a string, Find the magnitude of frictional force acting on mass
What force does the child exert on the seat : A father pushes his child on a swing so that the child's speed is 9.00 m/s at the lowest point of his path. What force does the child exert on the seat if his mass is 18.0 kg
Determine corresponding height of capillary rise in soil b : The void ratio of a given soil A is twice that of another soil B,while the effective size of particles of soil A is one-third thatof soil B. The height of capillary rise of water in soil A on acertain day is found to be 400 mm.
How much work is done by the rope on the sled : A sled is dragged along a horizontal path at a constant speed of 1.5 m/s by a rope that is inclined at an angle of 30.0° with respect to the horizontal, How much work is done by the rope on the sled
Determine depth of zone of saturation below ground level : The natural ground water table at a site is located at a depth of 2m below the ground water. Laboratory tests reveal that the voidratio of the soil is 0.85 while the grain size corresponding to 10%finer is 0.05 mm.
Find the tension in the cable above the worker : A cable is lifting a construction worker and a crate, as the drawing shows. What is the tension in the cable above the worker
What is the value of the new resistance in ohms : A cylindrical conductor has resistance of R0 = 200 ? (ohms). what's the value of the new resistance in ohms

Reviews

Write a Review

Civil Engineering Questions & Answers

  Cause of heading-up of the water surface

A rectangular channel 2.0 m wide carrying a discharge of 2.5 m3/s is to be fitted with a weir at its downstream end to provide a means of flow measurement as well as to cause heading-up of the water surface.

  Calculate the specific volume and density at a pressure

Assuming steam to be an ideal gas, calculate its specific volume and density at a pressure of 90 lb/in^2 and a temperature of 650°F.

  How long would it take to obtain a reduction in bacteria

In a study it was found that 39% of the bacteria died within 9 hoursand 67% died within 20 hours. If the rate of andwer proportional to the number remaining, how long would it take to obtain a 99.9% reduction in the bacteria

  Coefficient of friction-skidding resistance

Two passenger cars are traveling at 65 MPH on a highway moving in the same direction in the same lane. The cars are separated by 25 feet for every 10 MPH of their speed. The coefficient of friction (skidding resistance) between the tires and the r..

  What is the smallest number of bulbs to be purchased

A company manufactures a brand of light bulbs with a lifetime in month that is normally distribute with a mean=3 and a variance=1. A consumer buys a number of these bulbs with the intention of replacing them successively as they burn out.

  Determine the magnitude of v which moves to the right

A stream of water of cross-section area A and velocity v1 strikes a plate which moves to the right with a velocity V. Determine the magnitude of V, knowing that A 5 600 mm2, v1 5 30 m/s and P 5 400 N.

  Determine the stresses in cables and deflections of points

The steel beam ABCD is simply supported at A (pin) and supported at B and D by steel cables each having a diameter of 12mm. A force of 20 kN is applied at point C. For steel, let E = 209 GPa.

  Alternative water resource projects

Consider two alternative water resource projects, A and B. Project A will cost $2,533,000 and will return $1,000,000 at the end of 5 years and $4,000,000 at the end of 10 years.

  Calculate the hydraulic conductivity k of the soil sample

The diameter of the sample and the standpipe were 9.8 cm and 0.75 cm, respectively. The water level in the standpipe was observed to fall from 60 cm to 45 cm in 12 minutes. Calculate: a. The hydraulic conductivity k of the soil sample .

  What will be the lateral strain if poissons ratio is 33

An aluminum alloy rod has a circular cross section with a diameter of 8 millimeters. This rod is subjected to a tensile load of 4 kN. Assume E=69 GPa. What will be the lateral strain if Poisson's ratio is 0.33

  Determine the flow rate of the oil

Oil of a specific gravity of 0.75 is flowing through a 6-in pipe under a pressure of 15 psi. If the total energy relative to the datumplate is 8.0 ft below the center of the pipe is 58.6 ft, determine the flow rate of the oil.

  Which machine should be chosen using an interest rate

North City must choose between two new snow-removal machines. The SuperBlower has a $70,000 first cost, a 20 year life, and an $8000 salvage value. At the end of 9 years , it will need a major overhaul costing $19,000.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd