Determine cir and fdr with foamed asphalt

Assignment Help Civil Engineering
Reference no: EM13322320

The pavement structure consists of 160 mm of hot-mix asphalt (HMA), 150 mm of granular base and 450 mm of subbase placed over silty clay subgrade. The pavement is 20 years old and its current PCI is 50. The pavement currently exhibits low to medium and localized high severity alligator cracking, low to medium severity rutting, low severity raveling and low severity block cracking. The anticipated traffic loading is 10,000,000 ESAL's. The cost of construction is as follows: HMA $90/t of surface course and $70/t of binder course; granular base $18/t; subbase $12/t; tack coat $0.4/m2. Assume the following other costs, if you need them: CIR $14/m2; FDR with Foamed Asphalt $15/m2; crack rout and seal $2.5/m; and patching (mill 40 mm and patch 40 mm) $15/m2. If you consider a structural overlay, assume 40 mm of HMA surface course and 50 mm of binder course. Assume a discount rate of 4%. Carry out life cycle cost analysis.

Reference no: EM13322320

Questions Cloud

How long did the electric heating system run that night : A passive solar house that is losing heat is outdoors at an average rate of 50,000 kJ/h is maintained at 22oC at all times during a winter night for 10h.
What can you say about the index of refraction of the liquid : A beam of light is emitted 8.2cm beneath the surface of a liquid and strikes the surface 7.2cm from the point directly above the source. what can you say about the index of refraction of the liquid
Create an array of five shippedorder objects : Create 4 Order class fields: order number, customer name, quantity ordered, and total price. Create public accessors for each field except total price.
State a reaction mechanism for the dehydration : Write a reaction mechanism for the dehydration of 4,5-dimethyl-3-hexanol in concentrated phosphoric acid. Use curved arrows to show electron movement and clearly show the major product formed.
Determine cir and fdr with foamed asphalt : The pavement structure consists of 160 mm of hot-mix asphalt (HMA), 150 mm of granular base and 450 mm of subbase placed over silty clay subgrade. The pavement is 20 years old and its current PCI is 50.
Find the direction of the electron force on this charge : A charge q=-1.0 nC is instantaneously at a place where the electric field is 45 kN/C due east. hat are the magnitude and direction of the electron force on this charge
The statement of cash flow under the indirect method : The below is a list of activities to be included in the preparation of UMUC's 2013 statement of cash flows. Prepare, IN GOOD FORM, the statement of cash flow under the indirect method.
What was the change of the systems electric potential : An electron moves from point A where the potential is Va=+20.0kV to point B where the potential is Vb=- 40.0 kV. what was the change of the system's electric potential
Percentage-of-completion method in accounting for long-term : UMUC contracted to build a new hotel for $800,000 that will take 3 years to complete. The following information pertains to the contract. UMUC uses the percentage-of-completion method in accounting for long-term contracts.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine required width and volume flowrate of the model

The spillway for a dam is 20 m wide and is designed to carry 125 m3/s at flood stage. A 1:15 ratio model is constructed to study the flow characteristics through the spillway. The effects of surface tension and viscosity can be neglected.

  Explain why the architects requires a deflection limitation

The buildings are single story with a rood line 6 feet above the man-door opening is constructed from clay brick that is 12 inches thick and weighs 115 psf. the opening of the man-doors are 3 feet 4 inches wide.

  How much power is required to overcome aerodynamic drag

A new sports car has a drag coefficient of .30 and a frontal area of 21 ft^2, and is traveling at 110 mi/h. How much power is required to overcome aerodynamic drag if p=.002378 slugs/ft^3?

  What will be approximate distance from pipe entrance

Oil with a kinematic viscosity of 0.0035ft3/s flows through a 4-in-diameter pipe with a velocity of 15ft/s. What will be the approximate distance from the pipe entrance to the first point

  Determine force and couple at o equivalent to the two forces

Two forces are applied to the vertical post. Determine the force and couple at O equivalent to the two forces.

  What is the moment of the tension force acting at a

using the principles to developed in chapter 3 on equilibrium, one can determine that the tension in cable AB is 143.4 N. Determine the moment about the x-axis of this tension force acting on point A.

  Determine the rate of heat transfer to the stock in furnace

Cylindrical, steel bar stock (density = 7833 kg/m3, Cp = 0.465 kJ/(kg C)) of 10-cm diameter is heat-treated by drawing it at a velocity of 3 m/min through a 6-m-long furnace maintained at 900C.

  Compute the flow rate in the channel and the critical depth

The water depth before the jump is 0.4 m and after the jump is 1.7 m. Compute the flow rate in the channel, the critical depth and the headloss in the jump.

  Determine diameter of solid shaft if it is to transmit 50hp

If the allowable shear stress is 15ksi, determine the diameter of a solid shaft if it is to transmit 50hp at a frequency of (a) 900rpm, (b) 1800rpm

  How to specify the number of plates that can be stored

A plate storage system for a self-serve salad bar in a restaurant. As plates are added to or withdrawn from the stack, the spring force and stiffness are such that the plates always protrude above the tabletop by about 60 mm.

  Calculate how much heat must be added in the scenario

What is the theoretical maximum amount of work that could be done by a gas in a piston expanding from 10 L to 20 L (pressure of the surrounding atmosphere is 100 KPa)

  What is the change in it internal energy

A gas is compressed at a constant pressure of 0.800 atm from 9.00L tp 2.00L. in the process, 400J of energy leave the gas by heat. (a) What is the work done on the gas? (b) What is the change in it internal energy?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd