Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
two structural members A and B are bolted to a bracket. knowing that both members are in compression and that the force is 15 KN in member A and 10 KN in member B, determine by trigonmetry the magnitude and direction of the resultant of the force applied to the bracket by member A and B.
A rectangular channel carries a discharge of 2.00 m3/sec per meter of channel width over a weir crest that is 1.4 m in height. The energy grade line upstream of the weir measure 2.7 m above the channel bottom.
A section of a road has a superelevation of .6% and a curve of 600ft radius. What speed limit will you recommend at this section of the highway
38 mL of 0.02 N HCl is added to neutralize 50.0 mL of lime water (Ca(OH)2). Calculate the hardness of lime water as mg/L as CaCO3 and mg/L as Ca(OH)2.
An underground limestone mine with production of 12,000 tons/day will use trucks for the main haulage between an ore pass and a hoist skip pocket. The hauling distance is 5500 ft. The main haulage drift is horizontal and is 12.5 ft wide and 12.5 f..
A paddle wheel, inserted inserted into the volume, does 720 KJ of work on the air. If the volume is 2 cubic meters, calculate the entropy increase assuming constant specific heats.
To avoid shrinkage cracks in the grout, what should be the total expansion and total bleeding in term of percentage for the grout?
In a water table aquifer bounded on the ends by rivers, the hydraulic conductivity is 50 m/day. The hydraulic heads at x = 0 and x = 1000 m are 100 m and 90 m, respectively.
An asphalt concrete mixture includes 94% aggregate by weight. The specific gravities of aggregate and asphalt are 2.65 and 1.0, respectively. If the bulk density of themix is 147 pcf, what is the percent voids in the total mix
The modulus of elasticity of the wood is 13GPa. If one side of the column is 25cm across, find the minimum dimension of the other side to keep the column's deformatin under 1.3 mm
The temperature in the stack is 300 F and the pressure is 725 mm Hg. If the total flow rate of gas out of the stack is 190 standard cubic meters per second, calculate the total mass emissions of particulates out of the stack in kg/day.
At what air temperature will exhaled breath condense by self-nucleation. Assume that a saturation ratio of 4.3 is required.
If the BOD5 of the river below the mill outfall must not exceed 5 mg/L, what percent removal of organic matter (BOD5) is required by the mill to meet this requirement?
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd