Detemine elevation and stationing of low point-pvi and pvt

Assignment Help Civil Engineering
Reference no: EM13318881

a 1600ft long sag vertical curve(equal tangent) has a PVC at station 120+00 andelevation of 1500 ft.the initial grade is -3.5% and the final grade is +6.5%. detemine the elevation and stationing of the low point,PVI and PVT

Reference no: EM13318881

Questions Cloud

What is the capacitance of each capacitor : Two identical capacitors are connected in parallel to an ac generator that has a frequency of 579 Hz and produces a voltage of 24 V. What is the capacitance of each capacitor
Determine largest positive value p the structure can support : The structure consists of two uniform members AB and BC, each weight 2kN. The member are pinned to each other at B, and the structure is supported by a pin at C and a surface at A having coefficient of static friction 1.2.
Improved for crime prevention : A specific geographic area that I feel could be improved for crime prevention (Houston, TX). The area should be an easily accessed public area such as a city block, neighborhood, shopping center, school or shared community space such as a hosp..
Determine how far is the blackboard from her eyes : A student is reading a lecture written on a blackboard. The lenses in her eyes have a refractive power of 69.40 diopters, How far (in meters) is the blackboard from her eyes
Detemine elevation and stationing of low point-pvi and pvt : a 1600ft long sag vertical curve(equal tangent) has a PVC at station 120+00 andelevation of 1500 ft.the initial grade is -3.5% and the final grade is +6.5%.
What would be the change in pressure the formation of n2 gas : What would be the change in pressure in a sealed 10.0 L vessel due to the formation of N2 gas when 32.0 g of NH4NO2 decomposes at 25 degrees C
What type of loading arrangements found on a roadheader : Design a suitable ore pass to transport ore a vertical distance of 200m from  the extraction level to the transport level of a block caving mining operation.
Find the location of center of mass of the two masses : Two masses, M1=20.00 kg and M2=12.00 kg, are 50.00 m apart. Find the location of center of mass of the two masses
Calculate what is the nominal intrest rate on the loan : John had a little business on the side and did not have a girlfriend when he was at school and ehnce he was able to save the $10,000 for his dream car. The dealer agrees to take the car back for $8000

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the velocity and acceleration of point b

The velocity of the center point of the wheel is constant at 20 ft/sec to the right. For the instant, determine the following: a) The velocity and acceleration of point B (which is attached to the wheel) measured with respect to ground.

  How many ton of asphalt concrete will be required to overlay

How many tons of asphalt concrete will be required to overlay a 3-mile-long, 24-ft.-wide road with 2.5 in. of wearing course asphalt concrete that has a density of 146.3 pcf

  How to approximate the number of the 120 intervals

At a specified point on a highway, vehicles are known to arrive according to a poisson process. Vehicles are counted in 20 second intervals, and vehicle counts are taken in 120 of these time intervals.

  What is the tension in the line to the bottom of the tank

An object is submerged in a water tank and tethered by a line to the bottom of the tank. If the object has a density of 45 kg/cubic meter and a volume of 2.5 cubic meters, what is the tension in the line

  Determine how much should be paid for the bond

An investor is considering buying a 20-year corporate bond. The bond has a face value of $1000 and pay 6% interest per year in two semiannual payments. To receive 8% interest, compounded semiannually, how much should be paid for the bond

  Compare size of cmfr and pfr to achieve 50 percent

Compare the size of a CMFR (completly mixed flow reactor) and PFR (plug flow reactor) to achieve 50 percent removal of a contaminant, given a flow rate of 10^4 m^3/d and a first-order rate constant of -0.4/hr. Repeat for 99 percent removal.

  Principal stresses and the orientation of planes

A direct shear test is performed on a saturated specimen of loose sand. A normal stress equal to 100 kPa is applied and a maximum shear stress of 75 kPa is measured in the shear test. Determine the principal stresses and the orientation of these p..

  Waterline of center of gravity

The ship has a total weight of 155,000 tons, length = 1,600 feet and a beam = 150 feet (assume that it is the shape of a rectangular box). Calculate the height above the waterline of its center of Gravity (G).

  Find what must the form of the velocity component v be

Three components of an incompressible flow field are given by u=a(x^2-y^2), v unknown, and w=b, where a and b are constants. What must the form of the velocity component v be

  Calculate the flow rate imprted by the impeller

A six bladed rushton turbine 2.0m in diameter rotating at 25 rev/min in a tank 4m deep, water temperature= 10 degree celcius. For this flocculation system calculate the following: a) Reynolds number

  Emergency operations center-exercise takes place in a class

What type of exercise takes place in a classroom setting arranged to look like an emergency operations center or in an actual emergency operations center, and involves simulation using written, telephone, and radio messaging.

  Write macro that will take the distance between two cities

Transportation need to evaluate the time spent in traveling from city A to city B. The distance between the two cities is a variable because the macro developed is to be used for other cities.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd